How much does it cost to reshaft a golf club?
So, how much does it cost to reshaft a golf club? To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts.
How much does re-shafting golf clubs cost?
The cost of re-shafting a golf club will depend on the number of clubs, the type of materials, as well as the professional that is doing the job. How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club .
How much does a golf club shaft replacement cost?
With a vast array of shafts to choose from, there are options to fit every budget. For the budget-conscious golfer, replacement shafts can start at $30 for no-frills, entry-level quality. For players who are willing to pay a bit more, there are plenty of options lying between $50 to $200, for shafts in all five flex categories.
How do you replace a golf club shaft?
How To Re-Shaft Your Steel Golf Clubs
- Carefully clamp the shaft into a vise using a Shaft Vise Clamp. ...
- When removing steel shafts from clubheads, use a torch to heat the hosel. ...
- After 30 seconds of heating, with your gloved hands grasp the head and twist/pull the head. ...
- Using a wire brush remove excess epoxy from the inside of the hosel.
Is it worth it to Reshaft golf clubs?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Can you put new shafts on golf clubs?
Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
How much does it cost to change shaft on a driver?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
Is it easy to Reshaft irons?
Golf irons can be a bit easier to reshaft than a driver. If you are reshafting with steel irons, it is usually pretty straightforward. However, you will need the proper tools and space to complete this project.
Can I change the shafts in my irons?
Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.
How much do shafts cost?
A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like. The cheapest shafts you can get are somewhere around 10 bucks each.
How long does it take to Reshaft a golf club?
If in stock, our Certified club repair technicians can have your new shaft installed and ready for play within 48 hours.
Can you put a new shaft on a driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
How much does it cost to replace a golf shaft?
Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new grip which ranges from $3-$12, the average cost to replace a golf shaft is $18-$37 per club. Clubs are either graphite or steel, reshafting a graphite club far more expensive.
How much does it cost to install a golf grip?
Labor costs vary as much as the price, most retailers will charge $15-35 but it can even be as high as $100, will grip installation costing around $3-5 in most Golf shops, the ProShop mention above charges $3 labor per grip.
How to clean a hosel shaft?
Once the shaft is removed the inside of the hosel needs to be cleaned, use sandpaper to clean it inside, wrap some around a dowel rod slightly smaller than the inside of the hosel, and dip it around, tap any powder left inside and dip a q-tip in acetone to finish.
How long to let a golf shaft rest?
Don’t use too much and cause a mess. Reinsert the shaft, now align the shaft graphics to how you want, let it rest in the playing position for 24 hours. After, apply some acetone to a paper towel and hold the towel to the ferrule and spin it.
How far do the tips of a driver go?
You must know how far the tips of the shafts go, most drivers are 1″ but it varies to 1.25″
Can you use epoxy glue to glue golf clubs together?
Epoxy (glue) come in different types and have different uses, not all of them will work for keeping a Golf club together. Yes, you could use lighter fluid instead of grip solvent but they make the grip smell like gas for a long time.
Can You Re-Shaft A Golf Club Yourself?
I will explain how to re-shaft a Golf Club yourself later in this post, but before you go rush to be Mr/Mrs. DIY I’d be cautious.
How much does it cost to reshaft a golf club?
How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.
What is re shafting a golf club?
Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.
What are the extra costs?
Clubhouses may charge an additional fee to re-grip the clubs. This process can range anywhere from $5 to $15. Grips are going to vary in pricing. Higher end grips are going to cost more than a lower end grip. This is going to be all up to the user on what type of grip you want.
How to remove old shafts on iron?
During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.
Do golf clubs offer discounts?
If you are already a member of a golf club, check with them first as they may offer discounts to members.
How much does it cost to reshaft a golf club?
To reshaft a golf club, you’re likely to spend between $20 to $200 per club . The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts. Let’s take a closer look at how much it costs to reshaft a golf club.
What is the shaft of a golf club?
The shaft is the part of the golf club that connects the grip to the head of the club. This part of the club comes in various lengths and flex levels to match the swing speed of the golfer. This is important to keep in mind when you go to reshaft any of your clubs. It’s also tapered, with the top being wider than the bottom.
What happens if your golf club shaft breaks?
When the shaft on your golf club breaks, you’ll need to replace it. It isn’t something that can be easily repaired. This part of the club controls all of the power of your swing as you hit the ball. Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely.
What are the different types of shafts?
You’ll find a list of the different types of shafts below. Steel – There are two types of steel shafts: stepped steel and rifle steel. Stepped steel is used to reduce the diameter of the shaft between the two ends; rifle steel is smooth from top to bottom.
Why fix a broken shaft?
Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely. Fortunately, if this is the only reason for reshafting your club, it’s less likely to break the bank since it shouldn’t be your entire set.
Is graphite shaft better than steel shaft?
The material of the shaft will also change the cost of it. As mentioned above, graphite shafts are typically more expensive than steel ones, but they’re great for a lighter shaft. They will make your swing speed faster if that is something you need.
When do you need to reshaft a golf club?
There are two major times when you’re going to need a reshaft. The first is pretty straight forward: when the club breaks. The second isn’t likely something you’d think of: when your ball’s flight pattern isn’t delivering the desired results.
How much does a golf shaft cost?
Last but not least, for those who want only the best when it comes to their golf equipment, shafts can run as much as $600.
How Much Does it Cost to Replace a Driver Shaft?
Golf equipment manufacturers are becoming more cognizant of the important role that shaft plays in the performance of a driver. After all, the shaft is responsible for transferring the tremendous amount of energy generated by the golfer’s swing to the clubhead, which in turn impacts the ball and launches it into the air. The shaft, therefore, affects ball flight just as much as the head of the driver. (Source: Dick’s Sporting Goods – Pro Tips)
What is extra stiff shaft?
Extra stiff – This class of driver shafts is reserved for low handicappers and golfers who play at a competitive level. Long hitters play with extra stiff shafts on their drivers to not only take advantage of their length off the tee but also to control their ball flight and shape shots according to the course layout. Extra stiff driver shafts are designated with the letter “X.” Extra stiff flex shafts range in price from $30 to $600 (without installation).
What is a regular shaft?
Regular – This is the most common type of shaft flex and suits the typical recreational golfer who can routinely drive the ball 225 to 250 yards. This is an all-around shaft for players who are satisfied with their distance and want to maintain ball control. Regular flex shafts are designated with the letter “R.”
What is a driver shaft made of?
When it comes to material, the overwhelming majority of driver shafts on the market are graphite, which is a composite of graphite fibers and epoxy formed into what is essentially a hollow tube that is comparatively stronger than steel, but only half the weight. (Source: golfclub-technology)
Why is graphite important in golf?
It is the lightweight strength of graphite shafts that enables golfers to generate greater swing speeds , which, in the eyes of many, translates to longer distance off the tee. Since there is so much uniformity in driver shafts as far as the graphite material, the most important attribute as far as the recreational player is concerned is the amount of flexibility in the shaft or the flex . (Source: Golf Magazine)
What is the effect of flex in a driver shaft?
The amount of flex in a driver shaft has a significant effect on not only driving distance but also the golfer’s ability to keep the ball in the fairway (or in bounds, for that matter).