How much does it cost to get your shafts “pured?
The average cost to SST PURE a shaft across the SST licensee network is about $40. Sometimes that cost is included with the price of a new club. To retro PURE an existing club requires more labor since the club has to be dissembled, so that process can cost up to $75. ... Such a golf shaft does not exist on the market.
Can I Pure my golf shafts?
Jan 25, 2016 · I was not part of this testing but I have been getting my shafts Pure’d for many years now and have noticed consistency and feel with my pure’d shafts over non pure’d immediately. I know it can be expensive but I cannot understand how you can buy a $1500 set of irons and not put the additional $140-$180 for pure’ing.
How much does it cost to pure a golf club?
SST PURE Shaft Alignment, the leading golf shaft alignment technology on the PGA Tour and around the world, is available through The GolfWorks! SST PURE® identifies asymmetries that exist in every golf shaft and locates each shaft's most stable orientation. This results in more consistent performance and uniform feel from club to club.
How long will it take to receive my golf shaft pureing order?
The SST PURE® Shaft Alignment System analyzes the structure of any golf shaft and identifies its most stable bending plane, or u0003Neutral-Axis™. When assembled in the clubhead in this SST PUREd® orientation, the result is improved consistency from club to club within your set and set to set within your brand. YouTube. SST PURE Shaft Analysis.
How much does it cost to cut a golf shaft?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
How much does it cost to repair a golf shaft?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440.
How much does a shaft replacement cost?
Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new grip which ranges from $3-$12, the average cost to replace a golf shaft is $18-$37 per club. Clubs are either graphite or steel, reshafting a graphite club is far more expensive.
Can you straighten a golf shaft?
Take your golf towel and rub the shaft vigorously up and down. The friction will heat up the shaft to a point where you can straighten a slight bend. (Yes, it actually works.) Use nail polish for a custom, Tour-pro-grade paint job on your irons and wedges.
Can you get new shafts on irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Is it worth Reshafting my driver?
If you have a newer model driver and the shaft happens to break, it is worth replacing. If you just purchased a driver but have suddenly had a significant increase or decrease in swing speed, it is probably worth reshafting.
How much difference does a shaft make on a driver?
3. Length. Of course, the length of your driver shaft will significantly change how the golf club feels, but length affects strike point, too. As Briand says, a longer shaft will cause a less consistent strike on the face, and the golfer will tend to hit the ball closer to the heel.Jun 9, 2020
Can I replace the shaft on my driver?
Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.
Can I change my steel shafts to graphite?
The usual reasons to switch from steel to graphite are to play a lighter shaft to increase swing speed, or to reduce the amount of vibration from a steel shaft. But that logic is a little outdated.Aug 23, 2016
What is a shaft straightener?
The shaft straightener was used to gently bend prepared and heated wooden sticks to create an arrow shaft that would fly true. It is a flattened round stone with a groove pecked in the flat surface. To create that groove, flintknappers use a percussive technique called pecking.
Do golf clubs bend easily?
A properly manufactured club can be bent many times without breaking. Even the most skilled repair professionals can occasionally break a club. When this happens, it's usually the result of some type of inconsistency in the metallurgy of the club.Mar 26, 2019
How do I know if my iron shaft is bent?
0:452:12Golf Equipment: How Shafts Bend - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can see how straight the shaft is even before it.MoreAnd you can see how straight the shaft is even before it.
How much does it cost to pure a golf club?
Pureing a golf club is going to cost anywhere from $30 to $40 a club. When you consider doing this with the majority of your golf clubs, the costs are going to add up. In fact, unless you love your current set of golf clubs, this is an investment that may or may not be worth it. If you are playing with a seven-year-old set ...
Why is it important to pure a golf shaft?
Proponents of pureing golf shafts suggest that because the golf shaft is installed in the clubhead properly, the player can get the most distance out of their shot. When it comes to feel, golfers will not know that they are swinging a golf club that has been pured. When they hit a great shot, they still will not know that it was related to ...
Why is the spine of the golf shaft aligned?
This is because the spine of the golf shaft is aligned in a certain way to give the player the best benefit and eliminate some of the inconsistencies in the golf clubs. The best way for the spine to be aligned in a golf club is with the spine being located downline of the clubhead. If the spine is aligned directly with the clubhead, ...
What is pureing a golf shaft?
What Exactly Is Pureing A Golf Shaft. Pureing a golf shaft is when a golf shaft is taken out of the golf club, analyzed, and then placed back in at a strategic angle. Many golf clubs, when they come from a manufacturer, could have small imperfections in the shaft. This is not usually an issue, but for some players, it can be.
What is the most popular golf system?
The most popular system is the SST pure. You can send your clubs in to be pured, or you can work with a local Golf Works manufacturer to have them done. Another place to get it done is Dallas Golf; there they do something called Flowing.
Does pured golf clubs affect performance?
How Does It Effect Performance. Having your golf clubs pured only makes sense if it is going to give you an increase in performance. Certainly, all of this information about custom fitting, lie angles, club weights, shaft kick point etc. can become a little bit over the top.
Is pureing a way to charge more money for golf clubs?
Just like some people refuse to believe that custom fitting is necessary, some think that pureing is just another way to charge golfers more money for their golf clubs. Luckily there have been some studies conducted to find out if this process is actually effective.
What is a pured shaft?
To have a shaft that’s “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it’s in the most beneficial orientation for consistent performance when attached to a club head.
What does "pure" mean in golf?
We take a look at what it means to “pure” a golf shaft, or to have a set that’s “pured.”. Due to manufacturing tolerances, not all golf shafts are perfectly round or symmetrical. Any small imperfections — whether its wall thickness, roundness or otherwise — can cause variations in how one shaft performs versus another within the same model family.
SST PURE – What is it?
The textbook definition might read something like this – A process by which a specialized machine locates the optimal (most stable) orientation of a shaft.
Pros
SST PURE proponents will cite internal and several third-party studies that show clear evidence of improved accuracy (dispersion) and distance. There’s also plenty of anecdotal evidence from golfers who testify to better performance after switching to PURE’d shafts.
Cons
When golfers buy a dozen balls or a new wedge, they know exactly what they’re getting for a given price. With a service like SST PURE the deliverable isn’t as clear. And that additional bit of mystery leaves plenty of room for criticism.
Left To Ponder
In situations where grey area far exceeds black and white, we’re left with more questions than answers. So, is SST PURE worth an extra $35 or so per club?
How does pureing help in golf?
PUREing not only helped players land their shots nearer the centerline, it also helped them to shrink their dispersion. The average distance between players’ furthest right and furthest left shots was 2.1 yards smaller with the PUREd iron versus the non-PUREd iron.
Is a golf shaft straight?
Start by understanding that, to varying degrees, golf shafts aren’t perfectly straight or perfectly round. These irregularities can cause problems when the shaft twists and bends during the swing. SST PURE Shaft Alignment finds the most stable bending plane or “Neutral-Axis” of the shaft.
What is SST pure?
If you would like this service please call 1-800-848-8358. SST PURE Shaft Alignment, the leading golf shaft alignment technology on the PGA Tour and around the world, is available through The GolfWorks! SST PURE® identifies asymmetries ...
Can you align a screen logo on a golf shaft?
It is not possible to align screen logos on graphite or steel golf shafts that have received the PUREing process. PUREing may also result in screen logos not being uniform in location. This condition is a distinct indication that the golf clubs have been PUREd.
Who invented golf shafts?
The man responsible for making this technology available is Dick Weiss, a Florida businessman and clubmaker who has developed this highly sophisticated, patented process through which a golf shaft can be analyzed and its most stable position identified.
What is a SST Pure?
SST PURE® is a team of passionate individuals dedicated to growing the great game of golf. Our exclusive patented club alignment technology gives golf club builders all over the world the ability to give golfers the competitive edge. If you have questions or are interested in setting up a demo / consultation with us, please Contact us at 865-272-3702 or email us at: [email protected]
Is a golf shaft straight?
Golf shafts aren’t perfectly straight or perfectly round. Studies have shown that irregularities in a shaft’s structure cause off-line bending and twisting during the golf swing. This causes an increase in shot dispersion or, in irons, u0003inconsistent performance from club to club. The SST PURE® Shaft Alignment System analyzes the structure ...
