On average, the cost for a Volkswagen Golf Alltrack CV Axle / Shaft Assembly Replacement is $358 with $234 for parts and $123 for labor. Prices may vary depending on your location. Show example Volkswagen Golf Alltrack CV Axle / Shaft Assembly Replacement prices
How much does it cost to replace a rear axle shaft?
The average cost for axle shaft replacement is between $880 and $959. Labor costs are estimated between $157 and $198 while parts are priced between $723 and $761.
How do I replace the front drive axle?
Remove the front wheel from the side of the vehicle you are replacing the drive axle on. If you do not have an impact gun you can remove the center cap on the front wheel.
How often do front axles need to be replaced?
How often do front axles need to be replaced? Straight axles tend to fail less often than CV axles because of their heavy-duty nature. The typical front CV axle should last between 80,000 and 100,000 miles, but your driving style can significantly increase or decrease service life.
What is the difference between a rear and front axle?
Unlike a straight rear axle, the front axle must bend to allow the wheel to turn. This bending is accomplished using a universal joint. Independent suspension vehicles use CV axles, which have articulating heads at both ends, allowing the wheel to move independent of the differential in all directions.
How much does it cost to replace a right front axle?
The average to repair a front axle is $550 dollars. Rear axle repair costs run a little higher and average about $799 dollars. Your axle repair cost will depend on the type of vehicle, make and model of vehicle you drive.
How much does it cost to install a front axle?
CV Axle Replacement Expenses Replacement axle shafts can be bought for between $60-150.00 each, and labor is generally between 1.5-3 hours to replace, bringing labor to around $150-350.00.
How long does it take to replace a front axle?
On the 2006 Navigator, if a professional mechanic is replacing the axle(s), it is assumed to take about 1 hour to replace one axle (i.e., one side) whether it is the rear axle or the front axle.
Is a broken axle repairable?
Q : Is a broken axle repairable? In most cases, replacement is the best way to fix a bent or broken axle. Patching up an axle crack or break is too risky, as it can fail while you're driving.
How often do front axles need to be replaced?
Straight axles tend to fail less often than CV axles because of their heavy-duty nature. The typical front CV axle should last between 80,000 and 100,000 miles, but your driving style can significantly increase or decrease service life.
How does the front axle work?
Front drive axles are made of strong metal in order to withstand transmitting power from the engine to the wheels and carrying the weight of the vehicle.
What are the symptoms related to a bad front axle?
When a straight axle fails, it may cause vibration while driving. If the wheel bearing has failed, the axle and bearing will make a grinding noise while you drive. This may be accompanied by vibrations in the steering wheel and brake pedal.
Like many modern manufacturers Volkswagen shares components and even platforms across its many model lines
This article is based on one of those shared components but the work may have been performed on a different model than your vehicle. While some fasteners and other hardware types and sizes may be different, all of the information you need to safely complete the project is included in this article.
Project Photos
Figure 1 If you do not have an impact gun you can remove the center cap on the front wheel. Leave the car on the ground and insert the 27mm socket through the center (red arrow). Next, place the largest breaker bar you have on the socket and break the bolt loose.
How much does it cost to fix an axle?
How much does it cost to repair a car axle? The price may differ depending on the setup of the car as well as the car make and model but expect to pay everything from $150 to $450.
How much does it cost to replace a CV axle?
If you need to replace a CV axle, you can get one from $50 to $150, depending on the car model. It is recommended to buy an OEM axle, as universal CV axles may not suit your car very well.
What is an axle in a car?
Strictly speaking, an axle is any type of shaft that rotates a wheel or a gear. Around a century ago, a car axle would simply be an iron beam holding the wheels in place and supporting the weight of the car.
How to tell if your car axle is bad?
The most serious sign of a bad car axle is vibrations when the car is in motion. The vibrations can be so bad that even passengers may feel it but can also be isolated only to the steering wheel.
What is a CV axle?
CV axles are also called half shafts as they are doing half the work in the axle. There is one CV axle for each front wheel.
What is the difference between front wheel drive and rear wheel drive?
Most cars that are front-wheel drive use CV ax les in the front, however, rear-wheel drive cars use a differential in the back that is connected to a rear axle shaft which in turn connects to the rear wheel.
Why does my car's axle break down?
Luckily, the car axle rarely breaks down, and if it does it is usually damaged due to big physical forces acting on it. This may be due to a small (or big) crash or running into big potholes.
How often do front axles need to be replaced?
Straight axles tend to fail less often than CV axles because of their heavy-duty nature. The typical front CV axle should last between 80,000 and 100,000 miles, but your driving style can significantly increase or decrease service life.
What is front drive axle?
What is a front axle? The front drive axle is responsible for transmitting power from the transmission or differential to the wheel hub. There are two types: straight axles and constant velocity (CV) axles.
How does the front axle work?
Front drive axles are made of strong metal in order to withstand transmitting power from the engine to the wheels and carrying the weight of the vehicle.
What are the symptoms related to a bad front axle?
When a straight axle fails, it may cause vibration while driving. If the wheel bearing has failed, the axle and bearing will make a grinding noise while you drive. This may be accompanied by vibrations in the steering wheel and brake pedal.
What is the tube called that spins the axle?
Straight axles spin inside of a tube called the axle housing, which contains the differential in the center, the right and left axles, and the wheel bearings. Unlike a straight rear axle, the front axle must bend to allow the wheel to turn. This bending is accomplished using a universal joint.
What is CV axle?
Independent suspension vehicles use CV axles, which have articulating heads at both ends, allowing the wheel to move independent of the differential in all directions. The CV gears at the ends are enclosed in a thick rubber material, called the CV boot, that prevents grease from escaping and dust from entering.
Is it dangerous to drive with a faulty wheel bearing?
No, driving with a faulty axle or wheel bearing is dangerous. Aside from the vehicle feeling unstable, the wheel may come off when the bearing completely disintegrates. If you hear mechanical grinding from the wheel bearing, stop driving it and get it repaired.
How much does it cost to replace a front axle?
On average, you should expect to pay between $500-$600 for a front axle, depending on your vehicle and how much labor is involved.
How many axles do you need for a rear axle?
The front and rear axles have a left and right side, so you’ll actually need two axles to do the front and two to do the back.
What is the axle of a car?
Your axle is what allows the wheels to rotate, so damage to this part of your vehicle can’t be overlooked.
What happens if your axle is bent?
If the axle becomes bent, it will need to be repaired or replaced to protect the vehicle’s integrity.
How much does a 2007 Ford Escape rear axle cost?
For example, the rear axle for a 2007 Ford Escape might cost around $1,000 in some areas, while a very common, smaller vehicle like a Honda Civic might be a few hundred.
What is the front axle made of?
Front axles are typically made from carbon steel or nickel steel, because they must be one of the strongest and sturdiest components of the vehicle.
Why do some cars have more expensive axles?
The reason for this is because the parts on some vehicles are much more expensive , and the time that it takes to remove the old axle and replace it with the new one may be much greater with certain vehicle types.