How much do golf shafts cost?
“GOLF01” (CC BY 2.0) by SergioDJT. Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end.
How much does it cost to re-shaft a golf club?
To clarify, if you re-shaft a club you’re talking about replacing a shaft as opposed to shafting a new clubhead. Labor costs vary as much as the price, most retailers will charge $15-35 but it can even be as high as $100, will grip installation costing around $3-5 in most Golf shops, the ProShop mention above charges $3 labor per grip.
How to replace a golf shaft?
Choose the right shaft, uninstall the current shaft, and then follow the steps to install the new shaft. The part right above the clubhead is called hosel. After the hosel, there is ferrule that holds the hosel and shaft together. Check the shaft tip and make sure to measure everything properly.
What is a shaft on a golf club?
The shaft is the part of the golf club that connects the grip to the head of the club. This part of the club comes in various lengths and flex levels to match the swing speed of the golfer. This is important to keep in mind when you go to reshaft any of your clubs.
Is it worth it to Reshaft irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How much does it cost to change steel shafts to graphite?
Price to Reshaft Irons If you need a new graphite shaft in your iron, you could be looking at spending anywhere from $40-$100 just for the shaft.
Are steel shafts better than graphite?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
Can you replace graphite shafts with steel?
On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip. It's a little involved, but completely doable.
How much does it cost to reshaft a golf club?
How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.
What is re shafting a golf club?
Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.
What are the extra costs?
Clubhouses may charge an additional fee to re-grip the clubs. This process can range anywhere from $5 to $15. Grips are going to vary in pricing. Higher end grips are going to cost more than a lower end grip. This is going to be all up to the user on what type of grip you want.
How to remove old shafts on iron?
During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.
Do golf clubs offer discounts?
If you are already a member of a golf club, check with them first as they may offer discounts to members.
How much does it cost to reshaft a golf club?
To reshaft a golf club, you’re likely to spend between $20 to $200 per club . The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts. Let’s take a closer look at how much it costs to reshaft a golf club.
What is the shaft of a golf club?
The shaft is the part of the golf club that connects the grip to the head of the club. This part of the club comes in various lengths and flex levels to match the swing speed of the golfer. This is important to keep in mind when you go to reshaft any of your clubs. It’s also tapered, with the top being wider than the bottom.
What happens if your golf club shaft breaks?
When the shaft on your golf club breaks, you’ll need to replace it. It isn’t something that can be easily repaired. This part of the club controls all of the power of your swing as you hit the ball. Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely.
What are the different types of shafts?
You’ll find a list of the different types of shafts below. Steel – There are two types of steel shafts: stepped steel and rifle steel. Stepped steel is used to reduce the diameter of the shaft between the two ends; rifle steel is smooth from top to bottom.
Why fix a broken shaft?
Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely. Fortunately, if this is the only reason for reshafting your club, it’s less likely to break the bank since it shouldn’t be your entire set.
Is graphite shaft better than steel shaft?
The material of the shaft will also change the cost of it. As mentioned above, graphite shafts are typically more expensive than steel ones, but they’re great for a lighter shaft. They will make your swing speed faster if that is something you need.
When do you need to reshaft a golf club?
There are two major times when you’re going to need a reshaft. The first is pretty straight forward: when the club breaks. The second isn’t likely something you’d think of: when your ball’s flight pattern isn’t delivering the desired results.
How much does it cost to replace a golf shaft?
If in business for myself it will be about $20.00 per club. Remove a shaft, clean out the hosel, tip clean/prep the shaft, clean hosel of head the shaft is going in, install the shaft. Now if new ferrules properly turned down are required, that will be another $3.00 per club. Now if you wanted the shafts FLOed, that will be another $5.00 per club. Now if we are going to use the existing grips and you want them aligned after the FLOing, that will be another that will be $5.00 per club to remove and reinstall the grip. If all is required, it will be about $33.00 per club.
How to get ferrules to slide up shaft?
If your ferrules are a tight fit, then a minute or so in a cup of water in the micro wave will soften them up and help them to slide right onto the shafts. Get them started and then use an iron head to push the ferrule the proper distance up the shaft.
Is it reasonable to invest in DIY equipment?
I think that's reasonable. Remember your paying for somebodies skills. Investing in the proper equipment to DIY is just as costly, especially if it is a one time deal.
How much does a golf shaft cost?
Last but not least, for those who want only the best when it comes to their golf equipment, shafts can run as much as $600.
How Much Does it Cost to Replace a Driver Shaft?
Golf equipment manufacturers are becoming more cognizant of the important role that shaft plays in the performance of a driver. After all, the shaft is responsible for transferring the tremendous amount of energy generated by the golfer’s swing to the clubhead, which in turn impacts the ball and launches it into the air. The shaft, therefore, affects ball flight just as much as the head of the driver. (Source: Dick’s Sporting Goods – Pro Tips)
What is extra stiff shaft?
Extra stiff – This class of driver shafts is reserved for low handicappers and golfers who play at a competitive level. Long hitters play with extra stiff shafts on their drivers to not only take advantage of their length off the tee but also to control their ball flight and shape shots according to the course layout. Extra stiff driver shafts are designated with the letter “X.” Extra stiff flex shafts range in price from $30 to $600 (without installation).
What is a regular shaft?
Regular – This is the most common type of shaft flex and suits the typical recreational golfer who can routinely drive the ball 225 to 250 yards. This is an all-around shaft for players who are satisfied with their distance and want to maintain ball control. Regular flex shafts are designated with the letter “R.”
What is a driver shaft made of?
When it comes to material, the overwhelming majority of driver shafts on the market are graphite, which is a composite of graphite fibers and epoxy formed into what is essentially a hollow tube that is comparatively stronger than steel, but only half the weight. (Source: golfclub-technology)
Why is graphite important in golf?
It is the lightweight strength of graphite shafts that enables golfers to generate greater swing speeds , which, in the eyes of many, translates to longer distance off the tee. Since there is so much uniformity in driver shafts as far as the graphite material, the most important attribute as far as the recreational player is concerned is the amount of flexibility in the shaft or the flex . (Source: Golf Magazine)
What is the effect of flex in a driver shaft?
The amount of flex in a driver shaft has a significant effect on not only driving distance but also the golfer’s ability to keep the ball in the fairway (or in bounds, for that matter).
How much does it cost to replace an iron shaft?
By several market research, you need to spend $15 to $25 to install an iron shaft. After re-shafting, you need to set up a new grip. That will cost around $3 to $12.
How much does it cost to reshaft an iron?
So the average material cost for reshafting each iron will be around $18 to $37. Adding labor or servicing cost, it will be between $20 to $100. The cost will increase according to the number of iron clubs.
How to reshaft iron clubs?
You can reshaft iron clubs from servicing stores. But the process isn’t very complex. If you want, you can reshaft in your home with less cost.
Why is a right shaft important?
A right shaft is essential for different speed ratings. A player needs the right and proper grip to help him to hit at various distances.
What is the second step in removing a shaft?
The second step is the removing part. The shaft may either be steel or graphite. The detaching process is quite different for them.
What happens if you swing a golf club with a wrong shaft?
So that a wrong and imperfect shaft may cause accuracy and speed degradation.
How many inches is a driver?
Drivers vary to 1.25 inches, mostly 1 inch is used. You need to know which driver is needed. To insert into the shaft, you need to remove the paint on the tip. Use another sandpaper to make it even.
How much does a golf shaft cost?
A good quality shaft will cost up to $200. The new club will cost around the same. To change the shaft of the entire club set will make the price go even higher.
How much does it cost to reshaft a golf club?
Reshafting a golf club will cost you $50 to $250. This price depends on the type of shaft you choose, the labor charges, and the other fees charged by the repair company.
Is it Worth Reshafting your Irons?
According to most golfers, it is worth reshafting irons if your iron shaft is damaged, or if the shaft is not suitable for your swing.
Should I reshaft irons or buy new ones?
If your golf clubs are old and unfitted, then go for a new set of golf clubs. But if the clubs are new and fitted, then you should have them reshafted.
What is the difference between a stiff shaft and a regular shaft?
This depends on the swing speed and power of the player. Stiff shafts are for those who swing with more speed. Regular shafts are better for golfers who swing with less speed.
What does "more flex" mean in golf?
More flex means the shaft is regular and less flex means the shaft is stiff. For those who swing the club powerfully and with speed, they need more control over the club. That is why they tend to choose stiff shafts. Those who have a less powerful swing need to choose regular shafts to flex the hit.
What is a Project X HZRDUS shaft?
What is the Project X HZRDUS Black Fairway Wood shaft? Project X HZRDUS Black Fairway Wood shaft is a low spin golf shaft design. It comes with enhanced firmness over the entire length of the shaft....
How much weight should a golf shaft be?
Weight. Getting the correct weight of your shaft is an important factor to consider as well. Shafts can range anywhere from 40 to 135 grams. Typically the rule of thumb is that a golfer with a slower swing speed will benefit from using a lighter shaft, and you would add weight as swing speed increases. As you might expect at this point, there are ...
Why is it important to choose the right shaft for golf clubs?
It can give you the best chance at striking the center of the face that will result in optimal launch conditions on the course. It absolutely has an effect on how well you can play.
What does it mean to choose the wrong shaft for a golf club?
Choosing the wrong shaft will make it much harder to access the center of the face more consistently on the course , and the last thing we want you to do is to make golf harder on yourself!
Why didn't Nick Price find a stiff shaft?
Regardless of the similarity in their swing speeds, Nick Price couldn’t find a shaft stiff enough for his swing because he would apply such an enormous amount of force, whereas Couples didn’t need as stiff of a shaft because of his smooth tempo.
What is fitting in golf?
When we put a customer through a fitting, we determine the right profile, weight, and flex that is required. Essentially we are writing a prescription for the golfer’s swing, and order the shaft to match what we believe will help them the most.
Why is shaft profile important?
Getting the right shaft profile for your swing is very important. It will greatly affect your ability to hit quality shots on the course . There is a lot of confusion in the golf shaft industry. With no standards for performance, the quality greatly varies, and often you get what you pay for. We hope that we have cleared up some ...
What is the most misunderstood product category in the golf industry?
One of the most misunderstood product categories in the golf industry is shafts . There are plenty of myths and mistruths out there that we wanted to clear up for you in this article and share what we have learned at Pete’s Golf over the past several decades.