How much does tipping a shaft make it stiffer?
From my experience, tipping a shaft 1 inch will make it circa 1/2 flex stiffer, but it depends on the shaft in question. As for the affect it will have on your numbers, well it certainly will not bring 4400rpm of spin, down to 2800 rpm.
Should you tip your golf shafts?
In most cases, shaft tipping is done to steel iron and wedge shafts but occasionally is done in graphite shafts for woods and drivers as well. Lastly, tipping won’t do much to affect spin rates and launch angle — two popular misconceptions when it comes to trimming the lower end of a shaft.
Does cutting off the handle of a golf shaft increase stiffness?
For that reason, trimming the handle section of a shaft does not dramatically increase shaft stiffness. Here’s another way to understand why tipping makes a shaft meaningfully stiffer. When you cut off a portion of the softest part of a golf shaft (the tip), it increases the overall stiffness.
How do you measure the stiffness of a golf shaft?
Our first measurement is made at 6″. But, we are measuring the flex of the 1″ to 11″ range of the shaft at that point. While the scale on the chart shows 6″, the flex is actually out to the tip of the shaft. In this golf shaft design you can see the shaft stiffness turn upward from 11″ toward the tip.
Does tipping a golf shaft make it stiffer?
1:0911:44The Purpose of Shaft Tipping - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd butt section are all analyzed individually uh so regardless of what which is a soft tip andMoreAnd butt section are all analyzed individually uh so regardless of what which is a soft tip and which is a soft butt the reality is the the higher we get towards the butt section that's where the
What is tip stiffness in a golf shaft?
Tip Flex: Tip Flex, or Retro Flex, represents the average stiffness toward the head side of the shaft. Sometimes this is measured in a very similar fashion as the static-flex measurement. The difference being that the tip end is clamped and the load is applied to the butt end of the shaft.
How does tip trimming affect Flex?
0:301:51What Does "Tipping" Your Driver Affect? // True Temper SchoolYouTubeStart of suggested clipEnd of suggested clipYou know you can tip an inch half an inch inch and a half whatever you want and obviously the moreMoreYou know you can tip an inch half an inch inch and a half whatever you want and obviously the more you tip you're gonna affect stiffness and increase in tipnis there.
How much do you tip a driver shaft?
The average length tipped on tour for drivers is near one inch. Some players do more though. Tiger Woods cut his driver shaft to 42.5 inches at one point in his career when using a True Temper X-100 steel shaft.
What effect does tipping a shaft?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft's resistance to twisting.
What does tip stiff mean?
But what does that mean to a golfer? Well a shaft that has a soft tip has a low bend point and this helps lift the ball in the air by adding dynamic loft. Players who hit the ball too high should look for a tip stiff shaft which does not add so much loft, which produces a lower and more penetrating trajectory.
Does tip trimming change swing weight?
So the general consensus is tip tripping isnt for changing the flex really but for compensating for head weight, and butt trim for length but can also effect weight of the head.
Does tipping reduce spin?
Lastly, tipping won't do much to affect spin rates and launch angle — two popular misconceptions when it comes to trimming the lower end of a shaft.
Should I tip my 3 wood shaft?
We generally do not recommend tip trimming on a driver or 3 wood shaft based on the shaft composition and how tipping could affect performance. We recommend that you consult your custom fitter or club-builder for the best tip trimming suggestions based on your individual swing and desired results.
Does cutting down a driver shaft make it stiffer?
"Cutting more of the grip end will still stiffen the shaft a little bit, but only because in doing so you make the shaft shorter, and not nearly as much as when trimming more from the tip end."Cutting Golf Shafts: Which End to Trim and the Effects on Shots - LiveAbouthttps://www.liveabout.com › cut-down-shafts-how-to-156...https://www.liveabout.com › cut-down-shafts-how-to-156...
Will a stiffer shaft reduce spin?
So the stiffer the shaft and/or more tip stiff the shaft in relation to your clubhead speed and point of release, the less the shaft bends forward at impact and the more that shaft becomes a lower launch and lower spin shaft.Wishon: The practical facts about spin and shaft design - GolfWRXhttps://www.golfwrx.com › the-practical-facts-about-spin-...https://www.golfwrx.com › the-practical-facts-about-spin-...
What is the difference between parallel and taper tip shafts?
The difference between a parallel tip shaft and a taper tip shaft is the tip diameter and shaft weight. All golf shafts taper from the butt to the tip, but parallel tips stop tapering below the last step, while the taper tips, continues to narrow.Taper Tip Shaft or Parallel Tip Iron Shafts - Golf club Technologyhttp://www.golfclub-technology.com › tapertipshafthttp://www.golfclub-technology.com › tapertipshaft
pierso2
Exactly what the title says...if a driver shaft is tipped .5" how much stiffer would it play? Say 1 inch or 2 inches? I'm hoping to take a stiff shaft and make it a Stiff+ since my swing speed is between stiff and extra stiff.
Golfrnut
Shafts can differ a bit, jump, or stay flat sometimes when tipping...so a lot of times it just depends on the shaft. Some may not change at all for the first 1/2", some may jump. A general rule of thumb is about 1/8" to 1 CPM.
stealthrt91
You have to take into account the OEM trimming specs as well. Example, I play a good amount of OBAN shafts and usually tip them 1-1.5". I personally notice no difference in flex, only ball flight. I trim all my fairways 1.5" (Drivers 1" and Hybrids 1") and it brings the ball flight down for me to what I want.
What are the myths about the shaft?
The Myths. Myth #1 – Tipping a shaft changes the feel. Myth #2 – Tipping a shaft will reduce spin. Myth #3 – Tipping a shaft will reduce launch angle. Myth #4 – Tipping a shaft will improve accuracy.
Does tipping a golf shaft help with accuracy?
Conclusion. If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.
Does a tipped shaft lower spin?
Tipping a shaft, just like choosing a stiffer flex, does not guarantee lower spin. As our players moved from the untipped shaft to the 1/2″ tip to the 1″ tip, two of them did see lower spin. However, two of them registered their highest spin numbers with the most heavily-tipped shaft.
Can you buy accuracy with a stiffer shaft?
You can’t buy accuracy with a stiffer shaft, and you can’t get it by tipping your shaft either. None of our testers saw the 1″ tipped shaft stand alone for accuracy, though two were equally (or near equally) accurate with the 1″ tip and the untipped shaft.
What does it mean when a golf shaft is tipped?
Getting a golf shaft tipped is when the shaft is cut back (tipped) from the clubhead end, shortening the club and making the tip of the shaft stiffer. If you tip it from the clubhead end, the club will maintain the same length with a stiffer shaft at the bottom of the club near the ball.
Why do you tip a golf shaft?
Tipping a golf shaft allows players to have more control over their club. It allows players to feel the proper flex and help control their ball flight trajectory. Making the shaft stiffer helps lower torque and lessens a golfers chances of twisting the club at impact which usually results in bad shots.
How many inches does Tiger Woods cut his driver shaft?
Tiger Woods cut his driver shaft to 42.5 inches at one point in his career when using a True Temper X-100 steel shaft. About 90 percent of all fairway woods are trimmed on the PGA Tour. Woods are commonly tipped three to four inches.
What happens if you cut a golf club from the butt?
If you cut a club from the butt end then you will make the club shorter and stiffer. If you cut too much length off and shorten the club too much, you will have it stiffer but you might lose distance as well.
How much should a golf tipping shaft be?
These recommendations can range from 0.25 inches to 1.5 inches and vary from product to product and manufacturer to manufacturer.
Why do you tip a golf shaft?
Here’s another way to understand why tipping makes a shaft meaningfully stiffer. When you cut off a portion of the softest part of a golf shaft ( the tip), it increases the overall stiffness. The handle section of a shaft, on the other hand, is longer and more uniformly stiff, so removing material from the handle does not make such ...
What is shaft tipping?
Shaft tipping is when a club builder removes length from the tip section of a shaft, which is the end where the clubhead is installed. In most cases, tip trimming a shaft makes it meaningfully stiffer. It also increases torsional stiffness, known as “torque,” which is a shaft’s resistance to twisting. On the other end of the shaft is the handle, ...
Why is tipping so complicated?
The reason tipping is so complicated is first and foremost the way most golf shafts are made. As we describe in this article, nearly all golf shafts on the market are made by hand with a decades-old process known as the Roll-Wrapping Method. Because these shafts are made by hand, it’s impossible for even two shafts that are supposed ...
Does trimming a shaft affect flex?
Handle trimming doesn’t affect shaft flex as much as tip trimming because most shafts become gradually stiffer as they move from tip to handle. For that reason, trimming the handle section of a shaft does not dramatically increase shaft stiffness. Here’s another way to understand why tipping makes a shaft meaningfully stiffer.
How to choose shafts for golf?
Choose shafts that simply “feel” good to you. While there are technical ways to match shafts with clubs based on how you play , at the end of the day, the correct choice is one that gives you confidence. If there are doubts about which shafts to buy, hit some shots with various types of shafts to see which feel the most comfortable to you.
What does stiffness mean in golf?
Stiffness of a shaft indicates how much it will bend during a shot; different types of golfers require shafts with different stiffnesses. If you swing the club with little speed and your ball travels a short distance, you probably need a shaft that will bend a lot when you hit the ball.
How far can you hit a senior golf ball?
If you hit the ball about 200 to 225 yards, Seniors shafts are probably right for you. If you routinely can hit it about 250 yards, pick Regular shafts. But if you hit it longer, choose Stiff ones. And unless you pound the ball 300 yards or more, stay away from shafts that are Extra-stiff.
How far can you hit a golf ball with a driver?
For example, if you strain to make the ball fly about 175 yards, you probably should have Ladies shafts. If you hit the ball about 200 to 225 yards, Seniors shafts are probably right for you.
Do you have to have the same shafts on every golf club?
Realize that you don't have to have the same shafts in every club. For example, you might benefit from a less rigid shaft in your driver and possibly your hybrid clubs for more distance, but you may pick a stiffer shaft for your mid-irons and wedges where you place a great premium on accuracy and less on distance.
What happens if your golf shaft is too stiff?
One of the biggest indicators that your golf shaft is too stiff is that you are having trouble hitting the ball high. If you have a low swing speed and the shaft is too stiff, any well-struck ball will have a limit on the shot trajectory and the carry distance.
What happens if you play with a golf shaft that has too much flex?
If you play with a golf shaft that has too much flex, you can find yourself hitting draws with a lot of spin on them. Any golf shaft that has too much flex for your style will flex too much from the start to the finish of the swing, and this allows for inconsistent release points.
How does a club shaft flex affect your swing?
During your swing, your club’s shaft will flex, changing the club head’s position. When you pick the right flex for your swing speed, the clubface lands squarely on the ball, helping to improve your accuracy and maximize your distance. A shaft flex that is too stiff will result in less lag throughout the swing and at impact, ...
Why does my golf ball fade?
A leaking ball flight or fade because you won’t be able to flex the golf shaft enough when you swing to create a square impact position on the ball. A low ball flight, resulting in less distance. Inconsistent contact – your swing won’t feel solid, even when you get center hits.
What is the shaft of a golf club?
The golf shaft is the part of the club that provides the power that is transferred to the head of the club and eventually the ball every time you swing. The flex of your golf club’s shaft is the thing that will directly dictate how your club transfers power, so getting a shaft with too much or not enough flex can significantly affect your ...
How to feel when swinging a golf club?
If you prefer a “springy” feel, consider opting for a more flexible shaft. If you don’t like to feel the clubhead moving during your swing, a stiffer shaft will likely feel more comfortable for you.
Why does my golf ball fly so high?
If the course is wet, your ball will fly too high, the distance will be shorter, or it can limit roll out because it can plug when it lands. You can experience: A ball that tends to misses or pulls mostly to the left on each swing for right-handed golfers and to the right for left-handed golfers. A draw flight.
How to measure shaft torque?
Shaft torque - more correctly torsional stiffness - is measured by clamping a weight on an arm to the tip of the shaft and measuring how much it twists. The shaft twists over it's entire length, however any torsional stability added to the tip would be removed when tipping.
How much flex is 1"?
How much will actually depend on how stiff the butt is relative to the tip. In steel, 1" is about 1 full flex for most shafts. In graphite, it can be anything, because graphite shafts allow for significant differences in design that steel does not accommodate. -t.
Does tipping a golf shaft hurt the shaft?
Tipping will generally lower trajectory somewhat and can tighten up shot dispersion if you are playing a shaft with a tip too soft for your swing. However, beware of over-tipping because you can ruin the shaft completely if you cause the shaft to lose most of its kick and therefore its potential for maximum distance.
Do you tip a 757 shaft?
Therefore the 757 really must be tipped by 1/2" just to ensure the shaft will play true to its flex. (Tip it more than 1/2" if you are trying to customize the 757 shaft). On the other hand, if you put the same shaft in a bore-though or deep bore Driver (1.75" or more), then you definitely do not need to tip the 757 to have it play true ...
Do watch shafts need to be butt trim?
The amount of change for a typical shaft is going to be minimal however - likely outside of the ability to measure the change... so no way you'll feel it. Watch shafts that are recommended to be butt trim only.
Does Taylormade tip shafts?
Unfortunately OEM's like TaylorMade do NOT tip their shafts, so tipping is always the Buyer's responsibility. It is worth the effort to get the tipping it right however. It can make a big difference in accuracy and trajectory. Quote.
Does tipping stiffen the shaft?
Tipping stiffens the tip but will not change the flex of a shaft, i.e. a Stiff Flex will still be a Stiff Flex when tipped. One should never tip with the idea of trying to change a shaft's flex. However, if you find yourself spraying your shots and hitting shots that tend to balloon and fly too high, then a bit of tipping may help. ...
What Is Tipping and Why Would You Do It?
The Myths
- Myth #1 – Tipping a shaft changes the feel Myth #2 – Tipping a shaft will reduce spin Myth #3 – Tipping a shaft will reduce launch angle Myth #4 – Tipping a shaft will improve accuracy
How We Tested
- For this test, we brought together five golfers with handicaps ranging from 10 to +3. Each player hit five drives with each of three shafts. One shaft was untipped, one was tipped 1/2″, and one was tipped 1″. The shaft used was the Nippon Regio Formula B. Each shaft was built to the same finished length and swing weight. All testing was done at and...
The Results
- Tipping a shaft unequivocally changes the feel. All five of our testers noticed a difference, though some were more sensitive to it than others. Despite not knowing which shaft they were testing, each one identified the feel as you would expect: the untipped version felt the softest, the 1″ tipping felt the stiffest. If you like the shaft you’re playing but want a stiffer feeling, tipping it sho…
Conclusion
- If you want a shaft to feel stiffer, tipping it will get results. However, tipping (just like playing a stiffer shaft) is no guarantee of lower spin, lower launch, or greater accuracy. If you’re interested in maximizing your distance off the tee and hitting more fairways, the best approach is to work with a high quality club fitter.