how much to change a golf shaft

Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new grip which ranges from $3-$12, the average cost to replace a golf shaft is $18-$37 per club. Clubs are either graphite

or steel, reshafting a graphite club is far more expensive.

Full Answer

How much does it cost to reshaft a golf club?

To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts.

How much does it cost to replace shafts?

The shop I managed which specialized in club repair charged $24.95 for a Dynamic Gold, which included the shaft and labor to install it. Shooting the grip off your old shaft and installing it on the new shaft was $5.00. Even if the shaft had snapped off at the hosel and the tip needed to be removed it was only an extra $5.00.

How much does it cost to replace a golf club grip?

Labor costs vary as much as the price, most retailers will charge $15-35 but it can even be as high as $100, will grip installation costing around $3-5 in most Golf shops, the ProShop mention above charges $3 labor per grip. Can You Re-Shaft A Golf Club Yourself?

Can you replace a bore through shaft on a golf club?

Bore-through golf clubs require a different shaft installation process. Trust the Golf Galaxy Certified Club Technicians who have been trained to install bore-through shafts. If your shaft is broken or doesn't fit your swing, you can have it removed by a Golf Galaxy Certified Club Technician.

Is it worth it to Reshaft golf clubs?

Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.

Can you replace a shaft on a golf club?

Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself.

How much does it cost to get fitted for a shaft?

On average, the cost to get your golf clubs fitted is $100 for each type of club or $275 for your entire bag. This cost covers the basics such as club loft, lie, weight, and also finding the right shaft for your game. Certain shops offer free club fitting but that normally is much more basic.

Is it worth it to Reshaft a driver?

If you have a newer model driver and the shaft happens to break, it is worth replacing. If you just purchased a driver but have suddenly had a significant increase or decrease in swing speed, it is probably worth reshafting.

How far should you hit a 7 iron?

Average 7 Iron Distances are following: Beginning golfers- 100 yards (men) or 60 yards (women) Intermediate golfers- 135 yards (men) and 75 yards (women) Advanced golfers- 165 yards (men) or 140 yards (women) PGA Tour Players- 185 yards (men) or 160 yards (women)

Can any shaft fit any driver?

Yes, most golf Driver shafts are interchangeable. Golf driver shafts can be replaced as long as the new shaft is the same length and made by the same brand of golf club.

How much does it cost to Reshaft a driver?

The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.

Do you have to buy clubs after a fitting?

Usually, the cost of the fitting is subtracted from the cost of the clubs if you buy them. If you don't like any of the clubs you try, then don't buy anything. You will likely have to pay a moderate fee for the fitting, but the results are yours to keep.

Can you fit clubs after you buy them?

And the answer is absolutely yes, it's worth getting fit for clubs you already have. Especially if you're 5-foot-5, since a stock set of clubs isn't likely to have the proper lie angle for you. Luckily, if that's the case, it's not a difficult fix.

Are steel shafts better than graphite?

Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.

What's the best shaft for driver?

The 10 BEST DRIVER SHAFTS 2022Project X HZRDUS Smoke Shaft (Best Overall)Mitsubishi Diamana Driver Shaft (Best for Quality)Mitsubishi Tensei CK Pro Series (Most Versatile Shaft)Fujikura Vista Pro 60 Driver Shaft (Best Club Head Speed)Aldila NVS 55 Shaft (Best for Boosting Distance)More items...•

What does a stiffer driver shaft do?

Stiff shafts produce lower torque (resistance to twisting) and go well with high-speed swings. Lower speeds should opt for a regular shaft that produces greater torque, to assist them with their launch speed.

Can you replace shafts on irons?

Can golf irons be reshafted? Yes, just like other types of golf clubs, golf irons can also be reshafted using a golf repair service.

Can you put a new shaft on a driver?

Replacing your old shaft can be a relatively painless process for you or your local repair shop. If your favorite old driver seems to have run out of quality hits, you might want to refresh it by adding a new shaft to the club.

How do you fix a broken golf shaft?

1:467:16Removing a Broken Graphite Shaft 2019 -Golf Club Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou've got to be able to drill it out with some drill bits. And then you've got to be able to cleanMoreYou've got to be able to drill it out with some drill bits. And then you've got to be able to clean it out so that's what we're gonna do so let's get spotted. All right just like on a shaft repair.

How do you remove a golf club shaft?

1:145:14Golf Club Repair - Part 1 - Removing a shaft & cleaning the hosel - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp once you get the ferrule off you're going to need a few minutes here up you can use basically aMoreUp once you get the ferrule off you're going to need a few minutes here up you can use basically a gas gun which I'll use a lot of times if I'm removing a steel shaft.

How much does it cost to regrip golf clubs?

What will it cost to regrip my clubs? Depending on the grip you pick, your full set of clubs should cost between $75 and $130. How can I extend the life of my grips? Golf grips are subjected to a tremendous degree of physical punishment. So in order to protect the surface of the handle and enhance its feel, they're usually coated with a thin layer of synthetic material. The coating process also helps reduce friction, which allows for better control of the club.

How much is a single golf club worth?

Depending on the sort of clubs you want, the typical cost of golf clubs is between $200 and $400. Golf clubs may range in price from $2 for a used putter to $600+ for a brand new driver. The price of golf clubs includes the shaft as well as the head of the club.

How much does it cost to replace a golf shaft?

Most retailers will charge $15-$25 to install a shaft, once a club is re-shafted it needs a new grip which ranges from $3-$12, the average cost to replace a golf shaft is $18-$37 per club. Clubs are either graphite or steel, reshafting a graphite club far more expensive.

How much does it cost to install a golf grip?

Labor costs vary as much as the price, most retailers will charge $15-35 but it can even be as high as $100, will grip installation costing around $3-5 in most Golf shops, the ProShop mention above charges $3 labor per grip.

How to clean a hosel shaft?

Once the shaft is removed the inside of the hosel needs to be cleaned, use sandpaper to clean it inside, wrap some around a dowel rod slightly smaller than the inside of the hosel, and dip it around, tap any powder left inside and dip a q-tip in acetone to finish.

How long to let a golf shaft rest?

Don’t use too much and cause a mess. Reinsert the shaft, now align the shaft graphics to how you want, let it rest in the playing position for 24 hours. After, apply some acetone to a paper towel and hold the towel to the ferrule and spin it.

How far do the tips of a driver go?

You must know how far the tips of the shafts go, most drivers are 1″ but it varies to 1.25″

Can you use epoxy glue to glue golf clubs together?

Epoxy (glue) come in different types and have different uses, not all of them will work for keeping a Golf club together. Yes, you could use lighter fluid instead of grip solvent but they make the grip smell like gas for a long time.

Can you use lighter fluid instead of grip solvent?

Yes, you could use lighter fluid instead of grip solvent but they make the grip smell like gas for a long time. You have to cut a shaft to a specific length with a tube cutter, it’s even more difficult with one, you could cut the shaft off and drill out the club’s hosel (where the shaft is inserted).

How much does it cost to reshaft a golf club?

To reshaft a golf club, you’re likely to spend between $20 to $200 per club . The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts. Let’s take a closer look at how much it costs to reshaft a golf club.

What happens if your golf club shaft breaks?

When the shaft on your golf club breaks, you’ll need to replace it. It isn’t something that can be easily repaired. This part of the club controls all of the power of your swing as you hit the ball. Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely.

What is the shaft of a golf club?

The shaft is the part of the golf club that connects the grip to the head of the club. This part of the club comes in various lengths and flex levels to match the swing speed of the golfer. This is important to keep in mind when you go to reshaft any of your clubs. It’s also tapered, with the top being wider than the bottom.

What are the different types of shafts?

You’ll find a list of the different types of shafts below. Steel – There are two types of steel shafts: stepped steel and rifle steel. Stepped steel is used to reduce the diameter of the shaft between the two ends; rifle steel is smooth from top to bottom.

Why fix a broken shaft?

Fixing a broken shaft is going to reduce the strength it has overall. The best option is to replace it completely. Fortunately, if this is the only reason for reshafting your club, it’s less likely to break the bank since it shouldn’t be your entire set.

Is graphite shaft better than steel shaft?

The material of the shaft will also change the cost of it. As mentioned above, graphite shafts are typically more expensive than steel ones, but they’re great for a lighter shaft. They will make your swing speed faster if that is something you need.

When do you need to reshaft a golf club?

There are two major times when you’re going to need a reshaft. The first is pretty straight forward: when the club breaks. The second isn’t likely something you’d think of: when your ball’s flight pattern isn’t delivering the desired results.

How much does it cost to reshaft a golf club?

How much does reshafting golf clubs cost? Depending on the quality of the shaft, the cost can be anywhere from $15 to as much as $150 per club. If the shaft is a higher name brand shaft, it is going to be near the higher end, while a lesser known brand can be toward the lower end. Materials will also play a role.

What is re shafting a golf club?

Re-shafting a golf club is the process of removing the old shaft and replacing it with a newer one. Golfers may often have this process done if they want a new shaft or the previous one broke. Installing a new shaft can be a time-consuming process for many golfers, and this is one of the main reasons that most turn to a professional.

What are the extra costs?

Clubhouses may charge an additional fee to re-grip the clubs. This process can range anywhere from $5 to $15. Grips are going to vary in pricing. Higher end grips are going to cost more than a lower end grip. This is going to be all up to the user on what type of grip you want.

How can I save money?

GolfGalaxy.com has a resource that shows you exactly how to re-shaft a club. This can be an inexpensive way to replace it without the use of a professional.

How to remove old shafts on iron?

During the procedure, the older shafts on your iron or driver will be removed by heating the shaft with a heat gun. Once the older shaft is removed, the undercarriage will be cleaned up with a sandpaper until it is shiny in appearance. The newer shaft will be cut to size and applied to the golf club using an epoxy.

Do golf clubs offer discounts?

If you are already a member of a golf club, check with them first as they may offer discounts to members.

How much does it cost to replace a golf shaft?

If in business for myself it will be about $20.00 per club. Remove a shaft, clean out the hosel, tip clean/prep the shaft, clean hosel of head the shaft is going in, install the shaft. Now if new ferrules properly turned down are required, that will be another $3.00 per club. Now if you wanted the shafts FLOed, that will be another $5.00 per club. Now if we are going to use the existing grips and you want them aligned after the FLOing, that will be another that will be $5.00 per club to remove and reinstall the grip. If all is required, it will be about $33.00 per club.

How to get ferrules to slide up shaft?

If your ferrules are a tight fit, then a minute or so in a cup of water in the micro wave will soften them up and help them to slide right onto the shafts. Get them started and then use an iron head to push the ferrule the proper distance up the shaft.

Is it reasonable to invest in DIY equipment?

I think that's reasonable. Remember your paying for somebodies skills. Investing in the proper equipment to DIY is just as costly, especially if it is a one time deal.

What to do if your golf shaft is broken?

If your shaft is broken or doesn't fit your swing, you can have it removed by a Golf Galaxy Certified Club Technician. We have the tools to remove graphite or steel shafts without damaging other components of your golf club.

What to do if your club head is loose?

If your club head is loose or has become unattached from the shaft, don't go buy a new club. Golf Galaxy's Certified Club Technicians can install the head correctly and re-epoxy the head so it is returned to a like-new state.

What is a ferrule on a golf club?

Many clubheads require a ferrule, or plastic trim piece that provides a transition from the hosel of the clubhead to the shaft. Golf Galaxy's Certified Club Technicians can replace a broken or worn ferrule.

What is loft and lie adjustment?

Loft and lie adjustment involves the use of specially-designed equipment and a great deal of experience. Golf Galaxy Certified Club Technicians use methods and procedures to bend golf clubs as described by The GolfWorks. We have the knowledge and science to meet your individual loft and lie specifications.

Can you regrip a golf club?

Golf Galaxy's Certified Club Technicians are skilled in removing and installing golf club grips, and making sure you have the correct size grip.

How much does a Dynamic Golf shaft cost?

Yes, that's rather steep, but... The Dynamic Golf raw shaft costs about $21, so Dick's is charging you $36 for the removal, shaft prepping, refitting and grip salvage. If you're not a regular amateur clubsmith, just pay the $$. 1.

How to avoid matts in golf?

(Imagine playing football on that stuff). And if you ever start buying used clubs online always insist on closeup sole shots. Golf was meant to be played on grass and thats what the clubs are made for. Avoid those matts like the plague. Not to mention it's not giving real playing feedback on your swing.

Is it okay to use a mat at a driving range?

I don't come across those mats anymore except at the cheapest of cheap driving ranges, though. Good mats are fine for practicing, especially when you're working on something different.