According to a piece from our friends at Hacker's Paradise from 2010 in a Q&A with clubmaker John Hoeflich, "The original forecast was 7,500 sets and I think we shipped over 30,000 in 1988." Imagine that. That set of irons costs a pretty penny in the late 80s and were the envy of many. Estimated resale value today for the set: $27
Full Answer
What golf clubs did they use in the 70s and 80s?
But during the late ’70s and ’80s, they had several players on staff. They were most well known for a couple of clubs first being the Forged Tour Grind Irons, and secondly, the ladies 3-wood used by Fred Couples, which coincidentally came from Tom Watson’s wife’s set.
What are these classic golf clubs worth today?
Here's a look at 11 classic golf clubs or sets of clubs from the past and what they're worth today. 1 Arnold Palmer Peerless Chattanooga P31 Wood Set. This set of woods, manufactured when Palmer owned Peerless, came out... 2 PING ZING Irons. Introduced to the public in 1992 for a price of $1,200, these irons became an instant classic. More ...
How much should I spend on my first set of golf clubs?
My general guideline to our readers is to spend less than a thousand dollars on your first complete golf club set. You can find new full sets for much less, and do not forget that eBay and sites like GlobalGolf are great places to find quality clubs at low prices. How much is a starter set of golf clubs?
When did the first golf clubs come out?
He first started building clubs in the 1980s and since then has seen massive changes in technology and club design. Back in the early 80s when Woody first started in the industry, there were no means of measuring club performance – it was mostly about how the equipment looked.
How much does a standard set of golf clubs cost?
The Costs of Complete Sets of Golf Clubs Complete sets or packages of golf clubs aimed at the average golfer can range anywhere from around $100 to $1,200 (less than £100 to around the £1,000 mark).
Did golf clubs get more expensive?
It is correct that average selling prices have jumped significantly. Four years ago, the average sticker price for a metalwood of any kind (drivers, fairway woods, hybrids) was just around $200. Today, it's nearly $250. Yes, that's a big jump, but let's look at the economics and the physics.
Are 60 year old golf clubs worth anything?
Many clubs produced as recently as the 1950s and '60s are considered "classics." Some are worth $1,000 a set, and the right kind of sand wedge can bring $500 or more all by itself.
How much should you pay for a good set of golf clubs?
Golfers should look to spend between $500 and $2500 for a set of golf clubs. As technology is improving, the golf clubs on the market are getting a bit more expensive. For players who are looking to get more for their money, used golf clubs can sometimes make the best choice.
Why are golf clubs so expensive now?
Why are golf clubs so expensive? Golf clubs are expensive due to increasing research and development (R&D) costs. Manufactures mark up the cost of clubs significantly as it's a very competitive sector. Additionally golf companies need to spend large sums of money on marketing a new golf club.
Do cheap golf clubs make a difference?
Probably not, no, as your golf skills will be constantly improving and you probably won't have these clubs for very long. You will outgrow them and need a new set after only a couple of years so there is no real need to splurge as a beginner. You also won't be able to appreciate the extra quality.
Can golf irons go dead?
Golf irons will go dead and wear out over time as their grooves and clubface deteriorate from repeated use. Golf technology is always rapidly changing, meaning irons that are older than five years of age are likely outdated and won't perform as well as the latest models.
How long do golf irons last?
between 8 and 12 yearsA good set of golf irons can last anywhere between 8 and 12 years, or 300 rounds of golf. Of course, this number can vary depending on a number of factors. The golf iron head is built to last and be extremely durable.
What is the hardest club to hit in golf?
A 1-iron is the hardest iron to hit because it is the longest and has the lowest loft of between 14° and 16°. The rise of hybrid clubs to replace long irons however means in the modern game 1-irons and 2-irons are very rare indeed resulting in 3-irons and 4-irons in reality being the most difficult irons to hit.
How much is a decent set of irons?
On average, the cost of new OEM club will be around $1900. The driver will cost you $400, hybrid one $200, Fairway wood is at $200, Wedge at $150, Iron set at $800 and Putter at $150.
Are today's golf clubs better than 10 years ago?
There is no evidence that golf clubs deteriorate over time. Well maintained clubs will last a lifetime. 10+ year old clubs should be checked for better options but clubs less than 5 years old do not need replacing except for wear and tear issues to which wedges and forged irons are most vulnerable.
How much does a golf kit cost?
Q. 1 How Much Does a Golf Kit Cost? Ans: A decent kit for golf would cost you anywhere around Rs 14,000.
What were golf clubs made of before the turn of the 20th century?
Before that time, shafts were made of hickory, all iron heads were forged steel and woods were hand-carved from a single piece of persimmon. Clubs from before the turn of the 20th century can be worth quite a bit, presuming they were made by a prominent club maker and are in good condition.
How long has golf been around?
Some historians say the game of golf has been around for more than 500 years. Clubs and other equipment can be dated back to different eras throughout that time. To find clubs with significant value, you need to look back, definitely before World War II and probably before 1930, the year steel shafts and matched sets became common in golf club manufacturing. Before that time, shafts were made of hickory, all iron heads were forged steel and woods were hand-carved from a single piece of persimmon.
How long was the golf club missing from Hogan's bag?
The club was missing for some 30-plus years. Clubs like this one, if authenticated, would certainly generate a significant sum at auction. This particular club, however, was loaned for display to the USGA's Golf House Museum. Clubs owned by champions and presidents and celebrities can fetch tidy sums based solely on their previous and famous owners.
How much is a 1860s driver worth?
A driver from the 1860s hand-carved by Old Tom Morris or Laurie Auchterlonie in St. Andrews, for instance, could be worth a few hundred dollars or up to $20,000 depending on the model, condition and authenticity.
How much did a rake iron sell for in 1989?
One such iron, a rake iron designed to hit balls out of mud and water, was estimated to go for less than $300 at auction. It sold in 1989 for almost $80,000. Prices like these, while unusual, do happen now and again. Values in the vintage club market fluctuate wildly based on many factors.
When was the Hogan 1 iron first used?
A famous story first rose to the surface in the mid 1980s. A man in Texas purchased an old Hogan 1-iron out of a bargain bin. When he noticed the dime-sized wear mark on the sweet spot, he started to wonder if this could be the famous 1-iron used by Ben Hogan himself to force a playoff in the 1950 U.S. Open at Merion.
Do golf clubs appreciate over time?
Like wine or antiques, classic and vintage golf clubs can appreciate in value over time. Not every club appreciates or appreciates in the same way, however . Era, historical significance, rarity and condition are just a few of the factors influencing price, and this influence can be significant.
TimV
What Make and Model do you believe were the Best Golf Irons offered in the 1980's and why?
augustgolf
I got my first set of Titleist Tour Model woods and irons in 1980 - outstanding set, as we have many a reference to here in other threads.
RSinSG
I traded a set of McGregor Golden Bears that I got in 1971 or so for a set of Eye 2's in 1982 or so. I played that set until 2006. I still have them and play them occasionally. They are the only "vintage" clubs that are somewhat comparable to today's modern GI irons.
Steele47
Remember both being solid sticks but if had to pick would go with the Wilson's on account of the more rounded lines. Then in around 86 gave in to a used set of Ping Eye's because they were just so easy to hit. Got rid of them and got Eye2's. Should have kept the original Eye's.
Chris122
I liked my Titleist Tour Models (first editions) at the time well enough, but having now compared them with other irons from the time, I can't say they are the best feeling. I do like the way they look at address, though, and that has influenced what I look for in irons even now.
Wriggles
I played Wilson Staffs from 1974 until 1989. Bought a set of Pal Joeys, good clubs. Traded them in for a set of Tommy Armour Ti-100s, at full price, yikes.
cardoustie
I had Titleist tour model blades but at some point moved to Taylormade TD preferred irons ('88 or '89 I think)
What clubs were used in the 70s?
During the 1970s, 80s and early 90s, the earlier years of the then GCS, players and collectors alike sought out what came to be known as the “classic” clubs. Iron sets, wedges, 1 irons, putters and woods all had a collector following. The pros themselves were always in the market for a backup or different model persimmon wood or putter to put in their bag. There actually existed a network of individuals who scoured the countryside for clubs for touring pros to purchase at the Tour stops. Dealers from the past include Bobby Farino, Bob Kent, Guido Ianni, Roger Cleveland, Jim Butler, Bobby Grace, and even Jeff Ellis had a sales publication that included the classics.
Who is the author of Classic Golf Clubs?
Classic Golf Clubs by Joe Clement is a pictorial guide to woods irons and putters. Golf Classics Price and Identification Guide by Mike Doherty pictures and prices of many classics. Putters of Distinction by Dalton Daves lots of classic putters.
Who were the dealers of GCS?
Dealers from the past include Bobby Farino, Bob Kent, Guido Ianni, Roger Cleveland, Jim Butler, Bobby Grace, and even Jeff Ellis had a sales publication that included the classics. While the early GCS readily accepted members whose primary interest was the classic clubs, most club interest was in earlier equipment.
Is a golf club rare?
They can be quite rare. The Golf Club Identification and Price Guide II by Wilson and the GolfWorks is very helpful in identifying the exact year a club was made and also has some interesting golf manufacturer’s history.
How has golf equipment changed over the years?
Golf equipment has changed dramatically over the past several decades. Manufacturers have hired top engineering talent and invested massively in research and development in an effort to win over consumers. Compared with the persimmon drivers and blade irons of old, there is now a real opportunity to get clubs that are completely dialed in for your particular golf swing.
Who started designing Ping golf clubs?
Engineering talent had not flooded the industry yet, and Woody believes that the major change came when Karsten Solheim started designing PING golf clubs.
Why do golfers use drivers?
Modern drivers offer much larger faces , which allows golfers to increase their ball speed (and distance) on off-center strikes . Additionally, the lighter weight of the head and shaft makes it easier to generate more swing speed .
How fast is a Titleist golf ball?
Additionally, the ball speeds were very different – 139mph versus 151 mph.
When did Woody start building clubs?
He first started building clubs in the 1980s and since then has seen massive changes in technology and club design. Back in the early 80s when Woody first started in the industry, there were no means of measuring club performance – it was mostly about how the equipment looked.
Is golf harder than playing the wrong club?
As you know golf is a very challenging game, and playing the wrong equipment will make it that much harder for you. On the whole, the clubs being produced now are very impressive. It would be difficult to argue that any golfer could pick up a club from 40 years ago and have better performance than one produced today. How much of a difference exists will always be up for debate.
Who owns Pete's Golf?
I have spoken at length about the advancements in equipment with Woody Lashen, the co-owner of Pete’s Golf. His custom fitting business is considered one of the best in the entire industry by Golf Digest and almost every major OEM. He first started building clubs in the 1980s and since then has seen massive changes in technology and club design.
Who made Lynx golf clubs?
Eventually, the brand was sold to Golfsmith, which created new designs and offered Lynx as their premium component line to club builders. In a weird coincidence, the lead designer at Golfsmith at the time was Jeff Sheets and in the mid-2000s they cranked out some exceptional designs.
What wood did Fred Couples use?
They were most well known for a couple of clubs first being the Forged Tour Grind Irons, and secondly, the ladies 3-wood used by Fred Couples, which coincidentally came from Tom Watson’s wife’s set.
Why was Walter Hagen sold off?
Eventually, the brand lost its luster, and the Walter Hagen name was sold off to be used to sell entry-level products through big-box retail chains. But the history still lingers, and if you can find a set of Haig Ultras in good shape, you’ll know you’re are holding what was at the time a very premium product.
