Measure the new shaft and mark it at the desired length. Wrap masking tape around the area that will be cut and then place a marking on the tape. Use the hacksaw to cut down the shaft.
How do you shorten a golf club shaft?
With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How long does it take to cut a golf shaft?
It makes thin straight cuts in all types of shaft materials used in golf. Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
Should you shorten your driver shafts?
For some people, shortening the driver shaft can help them to hit the ball farther and keep it in play more. That last part is something that we all want to do. It’s hard to know this on your own without someone experienced studying your swing, like an experienced club fitter. They can evaluate your form and help you match with the right driver.
Can you cut graphite golf shafts?
Graphite shafts need special care to be cut properly. A tubing cutter, that you would use to manually cut a steel golf shaft, will crack or destroy a graphite shaft in no time at all. Don’t think about pulling the hacksaw from your tool chest either.
How do you shorten a golf shaft?
0:394:01How to Cut Golf Shaft DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for the first step you have to remove your old grip. I find the easiest way to do this is toMoreSo for the first step you have to remove your old grip. I find the easiest way to do this is to literally just cut a line all the way down your club.
Can you cut a golf shaft with a hacksaw?
Graphite shafts need special care to be cut properly. A tubing cutter, that you would use to manually cut a steel golf shaft, will crack or destroy a graphite shaft in no time at all. Don't think about pulling the hacksaw from your tool chest either.
Can you shorten a golf driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
How much does it cost to shorten a golf shaft?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
How do you cut a driver shaft at home?
Trimming Shafts to Improve Accuracy: Cut from Grip End Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft.
Where do you cut golf club shafts?
The butt end of the shaft is grip end. If you are shortening or extending the length of a golf club, this is where you will cut. If you want to change the play-ability of the club (feel, flex to a certain extent, spin rate, dispersion), you will be cutting the tip end of the shaft.
What happens if driver shaft is too long?
“If a driver shaft is too long for the player, they can struggle to find the middle consistently. Off-centre hits not only drastically reduce ball speed and distance, but have a big impact on accuracy.”
Will a shorter shaft help my slice?
When fitting a driver, it's important to get loft, lie, shaft, and grip sorted, but better driving may be hiding in a shorter shaft. In fact, a shorter shaft should help you find the sweet spot more often and may even add distance.
How long should my driver shaft be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
Is it bad to shorten golf clubs?
For most golfers, having clubs that are too short will be better than if they're too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You'll also have the tendency to push the ball a lot.
Is a 43 inch driver too short?
Tall golfers have found that they're able to play well with a 44 inch driver while shorter players are better off using a 43” driver. There are golfers who have had better control, lesser misses or slices and gained extra distance by about five yards when using a 44” driver when compared to a 43 inch driver.
Can you adjust golf club length?
You can buy extension pieces or cut one yourself from an old shaft, using the same cutting techniques that you did for trimming a shaft from the butt end. Use sandpaper to lightly abrade the edge of the extension piece that will attach to the new shaft, then apply epoxy glue to fasten the piece to the shaft.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
How to shorten a golf club shaft?
Remove the grip from the driver using a hook blade or a utility knife, as well as the grip tape on the shaft. Measure the length that you want to shorten on the shaft. Add an extra 1/8 inch to this and mark the position using a permanent marker. Fix the golf club in position in a vise.
How to narrow down a golf shaft?
The best way to narrow down on the right shaft is to do test shots on the range with drivers of varying lengths. The right shaft length will help you to hit the golf ball with the driver much the same way that you would do with a wedge.
How long is a golf driver shaft?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
Why is grip size important?
Grip size is just as important as the size of the shafts of your driver and other golf clubs for a perfect game. Big grip size can inhibit your wrist release through the impact area and cause a fade or a block.
How to make a golf club more upright?
By increasing or decreasing the shaft length by an extra half an inch will result in the club playing 1 degree more upright, or flat respectively. With a standard-length club, tall players tend to stoop quite a bit while short players will find themselves having to stand in a more upright position than required.
What is the difference between the length of the golf club and the length of the clubhead?
The length of the golf club’s shaft in relation to the overall length of the club defines the length of the driver shaft. Alternatively, this is the difference between the length of the overall golf club and the length of the clubhead. Generally, the longer your driver shaft is, the more difficult it becomes to have control over ...
When you shorten your golf shaft, do you keep in mind the after effects?
When you have decided to shorten your golf shaft, you must keep in mind the after-effects of doing so. How much and where you cut off the shaft has different effects on the golf club.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to get better adhesion on a grip?
It will also emulsify the adhesive and help it to get better surface adhesion with the inside of the grip. Plug the small hole in the top of the grip with a finger and turn the grip upside down. Spray some adhesive into the inside of the grip.
How long does it take for a grip to dry?
Once you have the new grip in place, you will need to let the adhesive dry and cure. It will take approximately 6-8 hours for a full cure.
How to cut yourself with a razor blade?
Put a fresh blade in your razor knife. A sharp blade cuts easier and that protects you from having to push or pull too hard, which could expose you to a higher risk of cutting yourself. A hook blade makes this step easier and safer. Slice through the grip until you have cut it from top to bottom.
What tool to use to cut graphite shaft?
For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible. Cut the desired amount from the shaft. Be careful to avoid cutting yourself with the saw or the tool.
Does trimming an inch off a golf club affect the weight?
But since you’re only trimming a little bit—it will only have a small impact on the overall performance of the club. Like we said earlier, big changes have big side effects.
Why use masking tape on graphite shafts?
Secondly, by wrapping tape around the shaft, reduces the likelihood that the shaft would splinter during the last moment of the cutting process.
Can a rod saw blade cut steel?
It makes thin straight cuts in all types of shaft materials used in golf. Yes, it is even strong enough to cut steel.
Can you cut graphite shafts?
Graphite shafts need special care to be cut properly. A tubing cutter, that you would use to manually cut a steel golf shaft, will crack or destroy a graphite shaft in no time at all. Don’t think about pulling the hacksaw from your tool chest either.
Why shorten the shaft on a golf driver?
For some people, shortening the driver shaft can help them to hit the ball farther and keep it in play more. That last part is something that we all want to do.
Why is the shaft shorter on a golf club?
Making the shaft shorter makes the club shorter, the shaft stiffer, and it will adjust the swing weight. Your club will have less flex when you remove weight. A regular flex can become stiff, and a stiff can become extra stiff when you shorter it, but that all depends on how much you shorten it. You need to be sure this is what you want ...
Why is a shorter driver shaft better?
Pros: A shorter driver shaft will shorten the arc of your swing. This will help you to hit the center of the clubface more often. Hitting the center of the clubface more often means you are more likely to keep the ball in play than you were before.
What does a longer shaft mean?
A longer shaft means a wider arc to your swing and that creates more speed. But hitting the center of the clubface is much more important. A shorter driver shaft means a shorter arc in your swing and that makes hitting the center of the clubface easier. Many players don’t lose any clubhead speed when they shorten their driver shaft by about an inch.
How long is the average driver on the PGA Tour?
On the PGA Tour, the average driver length is 44.5 inches. That’s shorter than the standard 45-46 inches.
Does shortening your driver shaft help?
More practice equals more consistency. Yes, better equipment helps. And equipment that is attuned to your needs helps even more. Shortening your driver shaft could be beneficial for you and combining that with the want to improve is a step in the right direction.
Does shortening a driver shaft make your handicap fall?
Most professional golfers are aware of the benefits that shortening their driver shaft, at least a little, can give them. This doesn’t mean that shorten ing your driver shaft will immediately make your handicap fall. The biggest factor is still your technique and how you play.
Matt J
Wrap the area of the shaft where you're going to cut in masking tip and you'll have less fray.
ptjn1201
If you're near a Harbor Freight, get one of their cheap, Chicago Electric brand rotary tools. The little Dremel-like blades work well, though they break easily. With coupons, you're talking less than $10.
nitram
If you're near a Harbor Freight, get one of their cheap, Chicago Electric brand rotary tools. The little Dremel-like blades work well, though they break easily. With coupons, you're talking less than $10.
Hot Rod 71
A rod saw is the cheapest and most effective route for keeping cost low, as mentioned above.
halliedog
Get a Dremel and the reinforced cuttoff discs. You should ALWAYS wear eye protection when using them.
skraly
I'm struggling with cutting graphite shafts with my hacksaw, finding it to be uneven. Is there a better tool out there I could be using that's not too expensive since I don't really use it that often?
