how to add length to golf clubs

by Hailee Gutmann Published 2 years ago Updated 2 years ago

^{How to Adjust a Golf Club Length}

Lengthening Effects. Lengthening a club gives you a longer swing and, potentially, a faster swing speed. The increased speed will translate into more distance if you hit the ball squarely.
Trim the Shaft. After you've decided to trim the shaft, consider whether to trim the tip or the butt end. ...
Lengthen a Club. Extend your steel or composite shaft up to 2 inches by adding a piece onto the butt end of your club.
Install a New Shaft. To avoid cutting the shaft or adding an attachment, purchase a new shaft at your desired length. ...

Full Answer

Does long shaft length mean longer golf clubs?

Mar 01, 2022 · How tall should my golf clubs be for my height? Using the ratio of every 6″ of height there should be a 1″ change in length then there should be a 1 ½” difference between their 5-irons. For example, recommend 36.5″ for the lady and 38″ for the man (or 36.75″ / 38.25″). Does shortening your driver Help?

Can you extend a golf shaft?

How to Extend Golf Shafts | SportsRec. Offer www.sportsrec.com. Mark the extension for the added length desired. Secure the shaft extension in the vise. Cut the extension to the desired length with a hacksaw and clean the residual material and smooth the …

How long should my golf clubs be?

Measure the shaft length Cut to your desired length Materials Needed Extension (You could also use an old golf shaft) Make sure you purchase the right size extension. You need to know the “butt diameter” of the shaft that you are extending, and purchase the extension that matches. Here is a database of shafts. Brampton Pro-Fix 20/20 Epoxy

How to measure Golf Club size?

Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to...

Customize Golf Club Fitting Chart: Callaway Golf Pre-Owned

To determine the correct length for a woman, simply add one inch to the length suggested in the chart. For example, if the chart suggests shortening a man's club by one inch, a woman's club (already one inch shorter) might not need any length adjustment. More ›

8 Things to Know About Single-Length Irons in Golf

The idea for a set of irons in which all the clubs, from the 3-iron to the wedges, are the same length, is not new. But single-length irons are getting much more attention these days thanks to one iconoclastic PGA Tour pro who is playing—and winning with—such a set on tour..

Are Your Golf Clubs Too Long or Too Short: 4 Steps to Size ..

The length of the club is measured from the end of the grip cap to the ground. When measuring for the right length, the club must be placed in the position used when playing at address. The length of the club can improve or hinder the distance on your swing. Basically, a longer club can provide better distance. More ›

Golf equipment truths: How much distance can you expect ..

Single-length likely falls in that category. In fact, in the company's latest King Forged Tec One Length offering, each iron has been designed to match the length (37.5 inches) and weight of a...

Club length and lie angle - Club Fitting - Team Titleist

Club Length and Lie angle relationship summary: It your club's lie is correct and you add 1/2 inch to the club's length your club then plays 1 degree upright, thus, if you shorten the club's length 1/2 inch the club now plays 1 degree flat. Please sign in to comment. Please login to post a comment. Sign In. More ›

The top 10 ways to gain distance regardless of your ... - Golf

Lots of golfers have their shaft leaning back at impact. This adds loft and also affects contact on the golf ball. Lots of tour players have a 7 iron and turn it into a 6 or 5 iron. Amateur golfers... More ›

What Length Golf Clubs Do You Need - Hireko Golf

The most common method used to recommend the length of a golf club is a "height-based" chart. Golf clubs are usually available in two primary lengths (excluding juniors) and somewhat based on statistics, like the average height of an average male and female. More ›

How does a lengthened golf club work?

A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.

What happens if you play too long in a golf club?

If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.

Why are golf clubs made the way they are?

The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.

What happens if your woods aren't longer?

If your woods didn’t have the length that they do, and they were shorter, you’d be sending your ball almost straight up and they wouldn’t close much of a distance. It’s not always about the angling of the golf club head; sometimes it’s about the length and force to make it meet the ball.

Why do you have to swoop on your golf club?

Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.

When shortening a golf club, do you have to remove the crown?

When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.

Why did Lars start golfing?

Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.

Series Navigation

Extending a golf shaft is a useful technique to have if you are buying used clubs, or if you are experimenting with different club lengths. If you know how to cut a golf shaft or how to extend it, you don’t ever have to worry about purchasing the correct length of clubs on Ebay or other used club marketplaces.

Materials Needed

Extension (You could also use an old golf shaft) Make sure you purchase the right size extension. You need to know the “butt diameter” of the shaft that you are extending, and purchase the extension that matches. Here is a database of shafts.

About the Author: Zach Gollwitzer

Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.

How does lengthening a shaft affect swing?

Timing and Feel. In many ways, the biggest effect of lengthening a club shaft is how it affects your ability to swing the club. The combined changes in length and swing weight make the club feel different. In turn, these changes will affect your timing and even your mechanics, perhaps without you even realizing it.

What does swing weight mean?

Swing Weight. Swing weight isn't an actual weight so much as a comparison of the difference in weight between the club head and the butt end of the shaft. It's expressed as a letter-number combination, such as C9 or D2. Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy ...

Can you add extenders to your golf shaft?

You may add extenders to your existing shafts or you may replace your existing shafts with longer ones. The effects can be very different. Tom Wishon has written extensively about the effects of changing shafts in "The Golfsmith Practical Clubfitting Program" guide.

Does lengthening the shaft make the club head heavier?

Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy for you, which will slow down your swing speed and actually reduce your distance.

Does lengthening a golf club shaft affect accuracy?

Accuracy. As a general rule, lengthening any club's shaft will reduce your accuracy with that club. The longer the club, the more difficult it becomes to hit the ball solidly. This is especially true when the ball is on the ground rather than on a tee, since hitting the ball fat is more likely.

Is shaft length a factor?

Shaft length is certainly a factor in how far you hit a given club. However, some clubs benefit more than others. Installing longer shafts in wedges and short irons will almost always result in more distance, as most players have little trouble swinging the shorter clubs.

Do golf clubs have longer shafts?

Effects of Lengthening a Golf Club Shaft. Tall players like Bubba Watson have to use longer shafts in all of their clubs. Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts.

How important is shaft length in golf clubs?

The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.

What happens if a golfer has a short club?

If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.

What does a professional club fitter do?

Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:

Why is playing with clubs too short bad?

Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.

What is the most important factor in creating distance with the driver?

However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.

Why are golf clubs not fitting?

Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.

Does a longer shaft mean faster club head speed?

A simple analysis of the physics of the golf swing makes it clear that, all things being equal, the longer the shaft, the faster the club head speed. Put another way, a longer shaft will generate more distance than a shorter shaft.

How to measure golf club length?

Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.

What is the minimum length of a golf club?

The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.

How long should a golf shaft be?

The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.

What does a longer shaft mean?

The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.

How to measure club size with LDA?

The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.

Where is the shaft of a putter located?

It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.

What is the LDA size limit?

It is the reason that the allowable LDA size limit is 50 inches for long driver competitions.

fenderu2

I've played Ping G5 irons for 8 years now at 1" over standard and stiff shaft. My new coach thinks I should go to 1.5" over standard, and a midsized grip. The cost to reshaft 8 clubs with new shaft, grip and service fee, will be like $300. Or I can just buy a new set 5-pw for $400 to $500.

sandman

I would just get an 1/2" extension installed on a club you hit a lot and see what happens. You can easily remove the extension if it doesn't work for you and if it does work, having your current clubs extended will be much cheaper. No need to completely reshaft your set to just add 1/2" to them.

jdhallissey

Well that is up to you.. Do you want a new set of irons? If you are in the market for new clubs then what I would do is order the clubs at 1 1/2in long like the fitter said and if you start playing them and they are to long then you can pull the grips cut 1/2in out and be on your marry way. Playing irons that far over standard is really weird.

scomac2002

It is obvious to me that if you do indeed need longer shafts in your irons, based on the quotes you have provided, the best option is to go new built to spec. Retrofitting the old clubs is just too expensive. I'm not a fan of extending existing clubs. I did that once and it played h*ll with the swing weight.

matchavez

First, don't worry about the 1.5" over. I'm "normal" and play +1. Will it "help"? Maybe. I have short arms, so for me, it's great. Second, I think there's a possibility you're not considering. When your clubs were made, they may have been +1'd with an extension already. If that's the case, you may not have a 1 1/2 cap...

kmac49

Assuming those quotes are accurate ($300 to reshaft/regrip vs approximately $450 for a new set built to spec), I would absolutely go new. You can sell your current set to offset some of the cost. If you could get $100 for your current set, then you are looking at $300 to reshaft/regrip vs $350 to get new...