Golf-FAQ.com

how to adjust brakes on a yamaha g16 golf cart

by Ms. Bridget Abbott Published 2 years ago Updated 1 year ago
image

G16 golf cart brake adjustment

  • Remove the back tire from the golf cart. ...
  • Take off the back tires and try spinning the drums. ...
  • Remove branches or sticks wedged on to the brake cable that might cause the brakes to engage. ...
  • Replace the return spring fitted to the brake pedal if it has lost its tension. ...
  • Pull the floor section in front of the brake pedal beneath the rubber mat upwards. ...

More items...

Part of a video titled Yamaha Golf Cart Brake Adjustment - YouTube
1:37
3:55
What I like to do with an adjustable wrench now to tighten it you can just gonna run it like aMoreWhat I like to do with an adjustable wrench now to tighten it you can just gonna run it like a tightening we're gonna go clockwise. So let's get it on there. Give it a couple turns.

Full Answer

How to adjust the brakes of an old style golf cart?

Adjusting the brakes of old style golf carts 1 Remove the wheel assemblies on both wheels 2 Release the parking brake of the brake pedal 3 Back off the adjusting rod of the brake cable so that there will be no tension along the arm of the shoe lever 4 Remove the brake drum

How do the brakes work on an E-Z-GO golf cart?

The brakes in an E-Z-GO golf cart are automatically adjusted by its mechanical rear drum braking system depending on the wear of the brake shoe. This is done while the golf cart is running.

How do you adjust the rear brake shoes?

If the brake shoes are adjusted manually, you need to return the drum to the axle. Then turn the star or adjuster screw until the drum is locked up. After which, you have to back the adjuster off about 3 to 5 clicks which should induce the drum to turn freely.

How do you adjust the travel of brake fluid?

You can adjust the brake fluid travel by loosening the nut and then rotating the spherical nut. The nuts need to be properly torqued at 10 to 11 ft.-lbs. or 14 – 15 Nm. The ideal setting for the brake fluid travel is from 7/8 inch to 1 and 1/8 inches or 2.2 to 2.9 cm.

image

How do you adjust the rear brakes on a Yamaha golf cart?

0:002:52Yamaha Drive2 Golf Cart Brake Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipCable you may need to loosen your brake cable up at the brake. Pedal. So that the shoes will releaseMoreCable you may need to loosen your brake cable up at the brake. Pedal. So that the shoes will release from the drum. More.

How do you adjust golf cart brakes?

0:444:18How to adjust golf cart brake pedal/brakes - YouTubeYouTubeStart of suggested clipEnd of suggested clipEasy. The adjustments right there that's the lock nut and the adjusting that releasing that back itMoreEasy. The adjustments right there that's the lock nut and the adjusting that releasing that back it off a bit. And then adjust the adjusting that to where you want it. And then tighten it up.

How do I know if my golf cart brakes are bad?

Much like a regular car, one of the ways you know that your brakes are starting to go bad is when they start making a squealing sound. The squealing will signify that the brake pads are actually wearing down. Another sign that your brakes have started to go bad is when the feel of your brake pedal changes when pressed.

How do you fix squeaky brakes on a golf cart?

To fix squeaky brakes on your golf cart, apply anti-squeal grease on the pads and replace the clips. With prolonged use, the brake pads of golf carts usually emit a squeaky noise while applying the brakes. This can be one way of alerting you to replace the brake pads.

Do golf cart brakes self adjust?

Many modern golf carts have self-adjustment brakes and do not require manual adjustment, but they do need a little bit of tweaking here and there. However, if you feel the brakes need adjustment, you can do so manually as well.

Why do golf cart brakes lock up?

Why Do Golf Cart Brakes Lock Up? Golf cart brakes can start locking up when the brake cable gets stuck, or when the bolts on the lift kit are loose. The brake cable gets stuck because of a binding, resulting in a mechanical linkage. One or more parts of the pivot assembly have rusted.

What happens when drum brakes go bad?

If the brake drums are worn excessively they can cause vibrations that may be felt in the pedal. Worn drums may also cause shuddering or pulsating that will become noticeable once you step on the pedal.

How do I know if I need new brake drums?

Here are a few of the things that you may notice when it is time to replace your brake drums.The back of car is shaking when trying to brake.The car pulls to one side when applying the brakes.A lot of noise from the rear of the car when trying to bring the car to a stop.

What does a bad brake drum sound like?

When the pads and shoes wear down, it can result in a metallic grinding noise, as the backing plate starts making contact with the rotor or drum. Brake pads also have a metal wear indicator that drags on the rotors when the pads are worn out. This will make a grinding or squealing noise.

What can I spray on my brakes to stop squeaking?

Permatex Disc Brake Quiet stops brake squealing by dampening vibration at the caliper/brake pad interface. While providing a tighter fit and allowing for easier disassembly it also protects against corrosion.

Why do my brakes squeak if my pads are still good?

If the brake pad friction surface wears down enough, you'll eventually hear a squealing noise because the pads (or what's left of them) and rotor are making metal-on-metal contact. Another cause of noise may be warped rotors, meaning the pads cannot evenly make contact with the rotor surface during braking.

Why do my brakes squeak but the pads are good?

As mentioned above, ceramic or metallic pads or moisture can cause pads to squeak. This type of squeaking is usually harmless, says Popular Mechanics. But new brake pads can also squeak because of a foreign object, explains Bockman's Auto Care. Twigs, pinecones or rocks may get stuck between the brake pad and rotor.

How do I tell what year my club car golf cart is?

The serial number of each vehicle is printed on a bar code decal. The two letters at the beginning of the serial number "A" indicate the vehicle model. The following four digits "B" indicate the model year and production week during which the vehicle was built.

How do you clean golf cart brakes?

Keep Them Clean First, lift the axle the brakes are on using a jack. Take off the wheels and brake drums from the studs. Use an aerosol brake parts cleaner to blow any accumulated dust and loose debris off the shoes. Once that's done, damped a clean rag with WD-40 and wipe away anything that didn't blow loose.

How to adjust brakes on a golf cart?

Here are the steps in adjusting the brakes: Turn off the power of the golf cart. Don’t set its parking brake. Put the brick or blocks in front and behind each of the front wheel of the golf cart to prevent it from rolling. Get the floor jack into position at the rear of the golf cart.

How to remove bricks from golf cart wheels?

Release the floor jack so that the golf cart wheels will again touch the floor. And then remove the bricks of blocks from the wheels in front.

What is optimal tire pressure for my golf cart?

Optimal tire pressure for your golf cart will vary by make and model. You can find the recommended tire pressure (known as PSI ) by looking on the tire’s sidewall.

Can you fix a flat on a golf cart?

Yes, absolutely ! It is a good idea to keep a can of tire repair sealant in your cart so that you’re prepared in case of emergency. The best thing to do once you get a flat is to use something like “Fix-a-flat” and then take the tire in to a local tire store or autobody to see if it can be repaired.

Why is it important to adjust the distance of travel on a golf cart?

It is important to adjust this distance of travel to make sure that the brakes are working properly. If there is too much travel distance, the braking capacity or power of the golf cart will be reduced. But if the distance is too short, the brakes may not release fully. So adjustments are necessary in both cases.

Do old golf carts have low switches?

Some of the old style golf carts may have run/low switches. These switches should be shifted to the tow position before disconnecting their battery packs. Lift the back of the golf cart and put the floor jack in a secure section of the cart which should provide it a stable support.

Do golf carts have brakes?

As in ordinary vehicles, golf carts have brakes. If you notice that the brakes are not functioning well, they need to be adjusted. Here are some of the ways by which you can adjust the brakes of different types of golf carts. This is also part of the golf cart maintenance checklist that we’ve created. Contents [ show]

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9