With the golf cart sitting on the ground roll it forward a couple feet then set the toe to 0 and take it for a short ride and see how the camber is. The toe setting will change the camber on a Yamaha so you might need to keep adjusting it until you fine the sweet spot. guitarman
Full Answer
How do you adjust camber on a Yamaha G9 golf cart?
You can have a positive camber (which is actually not harmful for a golf cart) by getting a lift along with bigger tires. New king pins and bushings also help to get a bit of positive camber. Yamaha G9 camber adjustment Worn out or incorrect struts are a key cause of camber problems in a Yamaha G9 golf cart.
What causes camber problems on a Yamaha G22 golf cart?
Usually, camber problems related to the Yamaha G22 golf cart can be attributed to weak springs. That’s why it is better to install OEM shocks for heavy-duty machines like this.
How do you fix high camber on a Yamaha G-16?
Highly displaced camber: This normally happens if your cart is too old and the control arm bushings of your spindle lift kit are heavily worn out. The best bet is to replace the bushings with new ones or simply switch to 6” double A arm lift kit. You can also adjust the toe to fix camber problems that might arise. This happens with the Yamaha G-16.
How do you fix high camber on a golf cart?
Highly displaced camber: This normally happens if your cart is too old and the control arm bushings of your spindle lift kit are heavily worn out. The best bet is to replace the bushings with new ones or simply switch to 6” double A arm lift kit. You can also adjust the toe to fix camber problems that might arise.
How do you adjust the camber on a Yamaha golf cart?
0:434:39Crash Course #11 How to Adjust Toe and Camber - YouTubeYouTubeStart of suggested clipEnd of suggested clipEvery part is different and some parts in particular like Yamaha has come with a lot of positiveMoreEvery part is different and some parts in particular like Yamaha has come with a lot of positive camber from the factory. So that's just something to keep in mind when you're making your alignment.
Can camber and caster be adjusted?
Placing shims between the upper control arm shaft and the frame (arrows) will increase negative camber. Adding positive camber involves removing shims. Once you've established the camber, caster is the next angle to check. With the bubble gauge installed on the hub, turn the tire inboard 20 degrees and level the gauge.
How do you align the front end of a Yamaha golf cart?
0:001:05Yamaha G-29 Golf Cart alignment steps - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is how you adjust the alignment on a Yamaha g29 golf cart very simple. You don't need to removeMoreThis is how you adjust the alignment on a Yamaha g29 golf cart very simple. You don't need to remove the front wheel or lift it but for the sake of the video and ease. We took the wheel off.
How do you adjust camber caster bolts?
0:3912:34How to adjust caster and camber using eccentrics on control arms ...YouTubeStart of suggested clipEnd of suggested clipRight so what we want to do to make it more negative is pull the top in or aka push the bottom outMoreRight so what we want to do to make it more negative is pull the top in or aka push the bottom out either way right to stand that wheel up that one's pretty easy to see caster is a little different.
How do you adjust the angle of caster?
1:492:45How to Check Your Caster - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo if you have adjustable upper control arms that's the best way to adjust the caster adjust theMoreSo if you have adjustable upper control arms that's the best way to adjust the caster adjust the link for those upper control arms change the caster angle.
Do you adjust caster or camber first?
With front-end alignments, correct caster and camber adjustments first. Certain FWD vehicles do not offer caster adjustments, but correcting the camber may bring the caster within specs.
How do you adjust the steering on a Yamaha golf cart?
0:091:39Removing and adjusting steering wheel on a Yamaha G-29 golf cartYouTubeStart of suggested clipEnd of suggested clipYou can use a screw driver or sometimes you use your hands and pop. It. These are the four pointsMoreYou can use a screw driver or sometimes you use your hands and pop. It. These are the four points where they'll connect into the steering wheel next thing you need is a 17 millimeter socket.
How do you adjust the toe on a golf cart?
Loosen the tie rod on the driver's side wheel and adjust the toe in by twisting the rod left or right depending on the direction you need to adjust the tire. If you need to adjust the tire inwards (towards the front of the cart) then turn the rod towards the rear of the cart, which will turn the tire in.
How do you straighten a golf cart frame?
3:1512:51Club Car DS / Carry All Frame Straightening (How To) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo far over we don't have room to grab it. With this particular tool so we just put a scissor jackMoreSo far over we don't have room to grab it. With this particular tool so we just put a scissor jack in there and just push this frame member over just to get us closer.
How do I adjust my camber?
3:356:09How to Adjust Your Camber - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs you screw this rod. And in and out it changes the length of this upper a-arm which then in turnMoreAs you screw this rod. And in and out it changes the length of this upper a-arm which then in turn changes. The camber angle of the tire.
How do you adjust a caster arm control?
0:555:37Factory Control Arm Caster Adjustment - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd basically you loosen the nut which loosens the bolt. And we can dial this and it's going toMoreAnd basically you loosen the nut which loosens the bolt. And we can dial this and it's going to allow this control arm to move this way in that.
How do you move the caster forward?
0:3315:40How To Adjust Your Caster and SPC Upper Control Arms To ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what you want to do first is set your lower cams to maximum positive caster and to do that allMoreAnd what you want to do first is set your lower cams to maximum positive caster and to do that all you need to do is just rotate this well first you need to loosen this bolt it's a 22 millimeter.
What to do if your golf cart is bent?
I would measure the toe and set it a 0 to start with. The toe adjustments will change the camber once the golf cart is rolling.
Does Yamaha golf cart have camber adjustment?
Yamaha golf carts have no camber adjustment. If the toe setting is incorrect it will change the camber. If it's darting it has to much toe in. If it feels like it's floating it has to much toe out.
What are the governors on a Yamaha golf cart?
The three types of governors in Yamaha models include spring adjustment, clutch cable, and spark regulation governors.
How to make a golf cart go faster?
To make a golf cart go faster, you can also consider installing a new engine. Always consult the owner's manual for the Yamaha golf cart model you have. Every model has limits to how fast it can physically go without engine damage or failure resulting. To make a golf cart go faster, you can also consider installing a new engine.
How to fix a loose steering wheel on a Yamaha golf cart?
You can fix a loose steering wheel on a Yamaha golf cart by opening up the steering box, filling it with grease, and closing the cover. Jack up the front of your Yamaha golf cart. Remove the cover of the steering box; it’s a plate secured by 4x 10mm bolts. Now fill the box with grease till the top. Fix the cover back.
How to turn locknut on golf cart?
The locknut should now be turned using the wrench in the clockwise direction; this must be done holding the center adjustment bolt in position. Move the steering wheel a few times to check if it is freely moving without any binding. Now lower the golf cart and remove the wheel blocks.
Why is my Yamaha golf cart steering wheel loose?
The most common reason for a loose steering wheel on your Yamaha golf cart is a loose tie rod. This can make your cart’s steering wheel feel loose while driving. Reasons for a loose steering wheel on a Yamaha golf cart: Cracks in the steering box. There could be cracks in it or the grease could be leaking. Faulty wheel bearings.
How to get steering wheel out of place?
You can now jerk the steering wheel out from its place. One way is to use all the force in your two hands to shake the wheel up and down and pull it towards you. The other option is to use a nylon hammer and tap the wheel from below lightly.
How to stop a cart from rolling off?
Place blocks on one of the rear wheels to prevent the cart from rolling off. Lift the front part of the cart with a jack; the wheels should be free. Now check if there is any play in the steering wheel by rotating the wheels right to left and back until they lock.
How to check if golf cart tie rods are locked?
The tie rod runs between the two front wheels and is connected to the steering shaft. You must turn the wheels manually to one side and then the other to check if the tie rods are locked in place and not loose.
How to fit steering wheel back after you removed it?
The wheel will come off. Now, you can fit the wheel back the way you removed it, putting the washer and nut back and tightening with a wrench or a rachet. Take the cart out and see if you feel comfortable and the steering wheel is not loose anymore.