By mechanically pulling the throttle lever back, you decrease the gas flow to the engine and control the golf cart’s speed. This governor can be adjusted by adjusting the cable nut which holds the cable to the throttle lever.
Full Answer
How do you adjust the governor on a golf cart?
Simply adjust the cable coming from this metal protrusion, turning the nut counterclockwise to make the cable longer, effectively adjusting the cart’s governance to increase the overall speed. If you cannot find external controls, you’ll need to adjust the governor internally.
How to bypass the governor on a Yamaha golf cart?
This is an easy way to bypass the golf cart governor and is supported by new model Yamaha golf carts that have a different setup from the G1 cart. This process involves removing the threaded rod and 10mm nut from the governor. Disconnect the throttle cable that is present in front of the governor arm.
Where is the governor spring on a golf cart?
Locate the governor arm of the golf cart. This is mounted above the rear axle housing and under the cart. Depending on the cart model, there may be a protection plate above the governor. Locate the governor spring in the engine of the cart next to the governor arm.
How fast can a golf cart go without a governor?
Top Speed of a Golf Cart Without Having a Governor The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph. In other words, the 15mph speed can be raised to 22mph with the adjustment.
How do you change the governor speed on a golf cart?
If you find this rod, then your governor can be easily adjusted by accessing the cart's inner workings. Simply adjust the cable coming from this metal protrusion, turning the nut counterclockwise to make the cable longer, effectively adjusting the cart's governance to increase the overall speed.
How do you adjust the speed governor on a gas golf cart?
1:065:06How to Adjust an E Z Go Golf Cart Governor - WikiVideo - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you are curious this is your carts carburetor loosen the small nut and tighten the larger nut.MoreIf you are curious this is your carts carburetor loosen the small nut and tighten the larger nut. The more you tighten the larger nut the faster your cart will.
How do you remove the speed limiter on a electric golf cart?
Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.
How do you take the limiter off a golf cart?
0:000:46How to remove governor on a Club Car golf cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this leverMoreYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this lever you want to lift up and Bend and that pulls on the cable a little more.
How do you make a golf cart go faster?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
Where is the governor on a golf cart?
0:061:28Where Is a Golf Cart Governor Located? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell a golf cart's governor located is actually down in the motor. Compartment. Some of them theseMoreWell a golf cart's governor located is actually down in the motor. Compartment. Some of them these electric ones nowadays. Actually the governor isn't a true governor. It is a control speed.
Does an electric golf cart have a governor?
Considering electric golf carts don't have governors like gas powered carts, the old-school method of simply removing the governor is not an option.
Why is my electric golf cart so slow?
Low Battery Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.
How does a golf cart governor work?
How Does a Golf Cart Governor Work? A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.
How do I turn off speed governor?
1:072:00How to remove your car's speed limiter como sacar limitacion de ...YouTubeStart of suggested clipEnd of suggested clipSelect on that and then. When you press cancel it means you're done and the tune will start toMoreSelect on that and then. When you press cancel it means you're done and the tune will start to upload you'll hear the fan kick on and then when you're all done it'll say the press select to enter.
How can I make my electric golf cart go faster without upgrading?
How to Make an Electric Golf Cart Faster Without UpgradesWash Your Cart Properly. ... Inspect the Batteries. ... Refill the Battery Water. ... Check the Gas Pedal and Linkage. ... Measure the Tire Pressure. ... Charge Up Your Battery Unit. ... Lighten Up Your Cart's Weight.
What does removing the governor do?
Removing the governor will increase the maximum rpm of the engine, but the internal parts of the Predator 212 are designed for 3600 rpm. Generally, this isn't an issue with just the governor removal, the internal parts can usually withstand 5000 rpm without breaking apart (unless you go full throttle for too long).
How to adjust governor on a golf cart?
If you find this rod, then your governor can be easily adjusted by accessing the cart’s inner workings. Simply adjust the cable coming from this metal protrusion, turning the nut counterclockwise to make the cable longer, effectively adjusting the cart’s governance to increase the overall speed. If you cannot find external controls, you’ll need to adjust the governor internally.
How to get to the engine on a golf cart?
Open up your golf cart’s access panel to get to the engine. In many cases, the panel pops open like a car hood, but in some instances you’ll need to unscrew the panel first.
Why are golf carts so popular?
In theory, golf carts make it easier for players to get across the course, saving their much-needed energy for the game. In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds. Luckily, you don’t have to stick with these standard speeds. Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.
How to loosen tension on a governor?
Use a screwdriver— or in some cases a wrench—to loosen the tension on the governor’s springs. You have now adjusted the governor for faster speed.
Who is the writer of GolfCarCatalog.com?
GolfCarCatalog.com – “Adjusting Your Golf Cart’s Governor”. Writer Bio. Richard Kalinowski began writing professionally in 2006. He also works as a website programmer and graphic designer for several clients.
Can you adjust the speed of a golf cart?
Luckily, you don’t have to stick with these standard speeds. Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.
Where is the governor located on a golf cart?
Check for a small rod near the golf cart's c lutch. If this rod is found, the governor can be adjusted by simply tightening or loosening the nut attached to the small wire connected to the rod. If a rod is not found, the governor is likely located inside the golf cart's engine bay on the largest wire running from the gas pedal.
Can you adjust a golf cart's governor?
Yes, it is possible to adjust the governor on a golf cart. Some golf carts use electronic governors, which are considered more difficult to adjust. It is best to consult a professional when dealing with these. The first step in adjusting the governor is locating it. Check for a small rod near the golf cart's clutch.
