The governor on a golf cart can be adjusted easily by loosening the tension on its springs using a wrench or screwdriver to get the golf cart going at a relatively faster speed. In some cases, the adjustment can be done by turning the cable nut that connects the cable to the throttle lever in the counter-clockwise direction.
How do you adjust the governor on a Yamaha G2 golf cart?
The following methods show you how to adjust the governor on your Yamaha G2 golf cart. Locate the lever present above the transaxle. This lever houses a 10mm nut. Tighten the nut or move it inwards as much as you want based on the desired speed using a 1/4″ drive ratchet with a 10mm deep socket.
How do you turn the Governor arm on a golf cart?
This makes the cart go at a slow speed. Loosen the nut attached to the governor arm with a 7/16” wrench to turn the shaft. Push the governor arm to the back of the cart and grasp it with your hand.
What are the different types of Yamaha Governor adjustments?
The three types of governors in Yamaha models include spring adjustment, clutch cable, and spark regulation governors. Each of these models has different procedures for proper adjustment, and it is important to adhere to each procedure correctly to ensure you do not make changes that could cause problems.
How do you fix a hole in a governor on a golf cart?
You can also make use of an epoxy like Marine-Tex sealant to close the holes. In a John Deere Gator golf cart, the governor is equipped with two governor arms.
How can I make my golf cart governor faster?
Tighten the governor spring located in the engine of most golf carts to adjust your cart's top speed. 90% of EZ Go Carts have simple springs which limit the speed of the engine. To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly.
Where is the governor on a Yamaha gas golf cart?
1:003:57How to Adjust Governor on Yamaha G29 Drive Gas Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo on your car you take the rear inspection panel off right underneath it here. You will have aMoreSo on your car you take the rear inspection panel off right underneath it here. You will have a spring actuated governor this is actually what speeds you up and slows you down.
How do I speed up my Yamaha electric golf cart?
6 Ways You Can Make a Golf Cart FasterAdd More Torque to Your Golf Cart.Upgrade Your Golf Cart's Motor.Improve the High-Speed Controller of the Cart.Add Better Golf Cart Tires.Use a Higher Powered Golf Cart Battery.Watch the Weight in Your Golf Cart.
How do you adjust the governor on a Yamaha 2021 golf cart?
3:234:32Yamaha Drive 2 Quietech Governor Adjustment - GET MORE SPEEDYouTubeStart of suggested clipEnd of suggested clipSo if you guys got some good value out of this video please hit that thumbs up be sure to subscribe.MoreSo if you guys got some good value out of this video please hit that thumbs up be sure to subscribe. So you catch the other. Videos. We're going to be doing all the maintenance on these cards.
Does a Yamaha golf cart have a governor?
Different types of Yamaha golf cart models have different types of governors, which regulate the top speed of the golf cart over flat terrain. The three types of governors in Yamaha models include spring adjustment, clutch cable, and spark regulation governors.
How do you adjust the governor on a Yamaha electric golf cart?
1:042:57Yamaha G29/DRIVE Governor Speed Increase | ASK DAVE | Golf Cart ...YouTubeStart of suggested clipEnd of suggested clipAnd locating the governor under the service panel in the rear above the engine. For reference it'sMoreAnd locating the governor under the service panel in the rear above the engine. For reference it's just opposite the driven clutch at the rear of the engine. Compartment.
How do you remove the speed limiter on a electric golf cart?
Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.
Why is my electric golf cart so slow?
Low Battery Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.
Where is the governor on a golf cart?
0:101:28Where Is a Golf Cart Governor Located? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell a golf cart's governor located is actually down in the motor. Compartment. Some of them theseMoreWell a golf cart's governor located is actually down in the motor. Compartment. Some of them these electric ones nowadays. Actually the governor isn't a true governor. It is a control speed.
How fast can a Yamaha golf cart go?
Most electric golf carts are faster than gasoline golf carts. Although, new gasoline and electric golf cart versions of Yamaha all have the same top speed. The top speed of both versions of Yamaha golf carts is 19 mph (31 kph).
What does removing the governor do?
Removing the governor will increase the maximum rpm of the engine, but the internal parts of the Predator 212 are designed for 3600 rpm. Generally, this isn't an issue with just the governor removal, the internal parts can usually withstand 5000 rpm without breaking apart (unless you go full throttle for too long).
How can I make my gas golf cart go faster?
How to Make Your Gas-Powdered Golf Cart Faster [Updated, 2022]1 Use A Better Golf Cart Battery.2 Increase Torque.3 Upgrade the Golf Cart Motor.4 Install a Torque Converter.5 Install a Higher-Performance Clutch.6 Tweak The Governor.7 Install A Cold Air Intake.8 Get Bigger Golf Cart Tires.More items...
How to adjust a Yamaha golf cart?
How Do You Adjust the Governor on a Yamaha Golf Cart? Adjusting the governor on a Yamaha golf cart begins with detaching a spring adjustment cable from the carburetor. Use a screwdriver to turn the bolts holding the governor clockwise to increase the speed. Run the cable on the gas pedal to the carburetor and reattach it at the original position ...
How to increase carburetor speed?
Use a screwdriver to turn the bolts holding the governor c lockwise to increase the speed. Run the cable on the gas pedal to the carburetor and reattach it at the original position of the governor cable. Adjust the gas pedal according to your needs. Start by locating and detaching the carburetor from the governor.
How to increase the speed of a cart?
Turn the nut anti-clockwise to elongate the cable, thus increasing the speed of the cart. You can reduce your vehicle's speed by turning the nut clockwise. Adjust the length of the gas pedal by removing the bolt on its shaft. After the adjustment, refasten the bolt and press the pedal. Make adjustments according to your speed needs.
Where is the governor arm on a golf cart?
Locate the governor arm of the golf cart. This is mounted above the rear axle housing and under the cart. Depending on the cart model, there may be a protection plate above the governor.
What is a golf cart governor?
A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.
How to start a golf cart with a gas pedal?
Locate the gas pedal that is fitted to the governor and remove the connection. Re-route the gas pedal to the carburetor. Remove the bolt present on the shaft of the gas pedal. Slide the shaft upwards so that the gas pedal has more play. Tighten the bolt and start the golf cart.
How fast is an EZGO golf cart?
The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph.
How to change the speed of a golf cart?
Locate the spring on the differential or carburetor that helps in changing the cart speed by adjusting its tension. Increase the length of the cable that is fitted on to the body of the throttle and clutch of the two-stroke engine.
How to ride a golf cart at full speed?
Ride the cart at full speed over a course of known length. This will ensure that the governor controls the speed of the cart within factory specifications. Fasten the black plastic cover and put the seat back in place. Take care when tightening the nut. The more you tighten, the faster your cart will go.
Can you remove a golf cart governor?
It doesn’t take much time or skill to remove a golf cart governor. With some basic mechanical expertise and general-purpose tools, you can do this yourself. The process is more or less the same in all golf carts.
How to find the governor on a golf cart?
Locate the golf cart’s governor; you can find the governor by tracing the thickest cable running from the gas pedal. This cable runs through the governor on its way to the carburetor. Use a screwdriver—or in some cases a wrench—to loosen the tension on the governor’s springs. You have now adjusted the governor for faster speed.
Who is the writer of GolfCarCatalog.com?
GolfCarCatalog.com – “Adjusting Your Golf Cart’s Governor”. Writer Bio. Richard Kalinowski began writing professionally in 2006. He also works as a website programmer and graphic designer for several clients.
Can a golf cart be a nuisance?
In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds. Luckily, you don’t have to stick with these standard speeds. Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.
Can golf carts be adjusted manually?
By Richard Kalinowski. Governors limit the speed of golf carts but can be adjusted manually. In theory, golf carts make it easier for players to get across the course, saving their much-needed energy for the game. In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds.
