how to adjust throttle on gas golf cart

by Mr. Rafael Zulauf Published 3 years ago Updated 2 years ago

Part of a video titled Simple Adjusting of an EZ Go Golf Cart Governor - YouTube

0:28

7:10

One Titan the governor spring located in the engine of most golf carts to adjust your carts topMoreOne Titan the governor spring located in the engine of most golf carts to adjust your carts top speed.

How do you adjust the throttle plate on a golf cart?

EZGO TXT throttle adjustment Ensure that the throttle plate is closed fully and the governor arm is rotated in the counter-clockwise direction... Loosen the nut that is near the throttle cable bracket and positioned towards the back of the cart. Tighten the other nut that is …

How do you adjust the gas pedal on a golf cart?

Jun 26, 2020 · Just adjust the throttle idle screw until the engine runs but the cart does not move. Turn it in to increase the idle speed, and turn it out to slow and eventually stop the engine. In respect to this, how do you adjust the throttle cable on a EZ Go golf cart? To adjust the throttle cable, check to ensure carburetor throttle plate is fully closed and governor arm is rotated fully …

What does a throttle cable do on a golf cart?

Mar 24, 2015 · Link to part on our website: http://www.diygolfcart.com/EZGO-Throttle-Cable-p/cbl-051(6429).htmLearn how to adjust your governor or throttle cable on an EZGO...

How do you adjust the idle on a golf cart?

1997 DS Club Car golf cart. Remove the two torx screws that keep the aluminum cover present over the cable area and the throttle shaft that is in place. Disconnect the fuel line. However, ensure that it’s fastened above the fuel level in the tank during reassembly. Columbia Golf Cart Carburetor Adjustment 1987 Columbia Golf Cart Carburetor Adjustment

How do you adjust the speed on a gas golf cart?

Tighten the governor spring located in the engine of most golf carts to adjust your cart's top speed. 90% of EZ Go Carts have simple springs which limit the speed of the engine. To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly.

How do you adjust the governor on a Club Car gas golf cart?

Part of a video titled How to remove governor on a Club Car golf cart - YouTube

0:04

0:46

You open up this box lap. Here. It looks up look inside. There's 12 cable down right here this leverMoreYou open up this box lap. Here. It looks up look inside. There's 12 cable down right here this lever you want to lift up and Bend and that pulls on the cable a little more.

Why is my gas golf cart running slow?

Low Battery

Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.Jul 14, 2021

How can I make my ezgo gas golf cart faster?

One way to increase the speed of EZ Go golf carts is to incorporate an octane booster when you fill the tank. The cart will have more pick-up, and it could gain as much as 5 mph. A different approach is to take out the throttle linkage governor on the carburetor.Jun 16, 2015

How fast can a gas golf cart go?

18 - 20 mph

Speed and performance:

A gas cart can run up to 18 - 20 mph and there are not many speed upgrades you can do to one. In addition, electric carts will get up to top speed faster as well.

Where is the governor on a Club Car golf cart?

Part of a video titled Where Is a Golf Cart Governor Located? - YouTube

0:06

1:28

Well a golf cart's governor located is actually down in the motor. Compartment. Some of them theseMoreWell a golf cart's governor located is actually down in the motor. Compartment. Some of them these electric ones nowadays. Actually the governor isn't a true governor. It is a control speed.

What controls the speed of a golf cart?

Essentially, your golf cart's speed controller sends its current and battery voltage to its motor. This process depends on your golf cart's input device, which includes its throttle. That's how your golf cart's speed controller lets you operate its acceleration rate, as well as its deceleration rate.Aug 29, 2019

Why does my golf cart slow down going uphill?

The Reason Your Electric Golf Cart Goes Slow Uphill? Your electric golf cart can struggle on inclines for a variety of reasons. Weak batteries, incorrect tires, and wear and tear to the motor and wiring are all potential causes of your cart's slow speed.

Why does my golf cart go slow up hills?

When your electric golf cart struggles on inclines, it means that you have to work harder to lift the front wheels. The cart's batteries interfere with its acceleration, and your speed decreases. Whether your coach is slowing down or not going up hills at all, you are losing valuable time and effort.

How do you adjust the governor on a EZ Go golf cart?

How to Adjust the Governor on a Gas E-Z-Go Golf Cart

Locate the governor arm mounted on top of the rear axle case underneath the cart. ...
Loosen the adjusting locknut on the end of the governor spring. ...
Retighten the adjusting locknut.

More items...

How fast can an ezgo golf cart go?

Looking at the specifications for EZ Go electric golf carts, you notice a cart with a 36-volt motor is capable of 12 to 14 mph top speed. In addition, you notice a cart that's powered by a 48-volt motor can reach speeds just below 20 mph.Dec 11, 2018

How fast can a golf cart go without a governor?

Consider Replacing Your Speed Control

A typical electric cart without an upgraded speed control tops out around 12 mph. If you go this route, anticipate an upgrade cost around $700.

How to remove cable from carburetor?

Remove the cable from the carburetor and cover its sheath opening using duct tape. To do this, make a small funnel with the tape and ensure that the wire sticks out from its middle. Loosen the nut that fixes the cable on to the mount housed on the motor just before its entry into the carburetor.

Where is the main jet on a 4-cycle engine?

The main jet in the carburetor diagram of a 4-cycle engine is located below the carburetor while the pilot jet is present on top of it. The needle valve and float pin are also housed under the carburetor.

Which is more powerful, carb or EFI?

The carb model is more powerful as well as starts and goes faster when compared to the EFI. The EFI experiences delay to start moving when the pedal is pressed.

How Does a Golf Cart Governor Work?

A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.

Top Speed of a Golf Cart Without Having a Governor

The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph.

How to Remove a Golf Cart Governor

It doesn’t take much time or skill to remove a golf cart governor. With some basic mechanical expertise and general-purpose tools, you can do this yourself. The process is more or less the same in all golf carts.

How to Adjust an EZGO Golf Cart Governor

Most EZGO golf carts have four-stroke engines. However, there are a few carts with other types of engines. The governor adjustment process is different for both types of engines.

How to Bypass a Golf Cart Governor

There are instances when golf cart owners want to bypass the governor in their carts. Here are some ways to do this using a few basic tools.

Yamaha G1 Governor Adjustment

The following methods show you how to adjust the governor on your Yamaha G1 golf cart.

Yamaha G2 Governor Adjustment

The following methods show you how to adjust the governor on your Yamaha G2 golf cart.

Golf-FAQ.com