You’ll tilt your spine angle forward with a nice straight back. Your back, from hip to top of head should be in nice straight alignment. Your arms hang straight down to fit to the handle while not changing the lie of the club on the ground surface.
What is spine alignment in golf clubs?
The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o’clock or 9 o’clock position – also called the neutral position.)
How do you align your shafts with the clubhead?
That shafts spine while flexing is directly on the top of the shaft - like a clock in the 12:00 o'clock position. I then mark that 12:00 o'clock position and will align that shaft in the clubhead with that marked like in a neutral, parallel, or squared position with the clubhead.
What is a spine in golf shafts?
A Spine should be visualized as a backbone or ridge in the golf shaft, running down its length, more resistant to bending than any other part of the shaft.
What is the best position for the shafts spine?
On a graphite shaft the normal position for the shafts spine is face up, this gives the shaft optimum resistance to shaft drop. (For info on shaft droop read up on the effect of shaft flex and club length on lie angles on the loft and lie page)
Where do you align the spine on a golf shaft?
Golf Shaft Spine Orientation There are two main positions that you can align the spine in, the swing plane and the droop plane.
Is spine alignment necessary?
Having proper alignment goes beyond maintaining a good posture — it can also help prevent long-term pain. Misalignment may impair your range of motion, and severe issues can affect your quality of life. There may be signs that your spine is misaligned, along with pain around several joints in the body.
How do you build a shaft spine Finder?
1:0812:22How to Make a Golf Shaft Spine Finder - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is the one I'm using to put where you put the shaft through it right you bend it down itMoreThis is the one I'm using to put where you put the shaft through it right you bend it down it rotates around and finds the spine.
Do you need to spine a golf shaft?
Aligning all the shafts within a set so their spines point in the same direction (either forward or back) is called 'spining. ' Golf shaft makers today typically pre-spine their shafts, so spining is not as common as it once was after-market. Recreational golfers don't need to worry about spining their golf shafts.
How do you correct a spinal alignment?
Keep your posture in mind, even if you're taking it easy.Moving regularly is key! Don't sit for too long, even in an ergonomic office chair. ... Keep both of your feet flat on the floor. Consider a footrest if necessary.Keep your back aligned against the back of your chair. Avoid leaning forward or slouching.
How do you know if your spine is straight?
Sit on the edge of your bed or lie down in your bed and see if one of your legs extends further than the other. This is a sign that your spine is out of alignment.
How do you align the spine of an arrow?
0:518:21Tech Tuesday | Spine Alignment | Victory Archery - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe the paradox of arrow is going to be vertical. So you want that spine alignment mark to be at theMoreThe the paradox of arrow is going to be vertical. So you want that spine alignment mark to be at the 12 o'clock. Or six o'clock. Position i prefer the 12 o'clock because the graphic sits up.
How do you pure iron shafts?
0:314:52Golf Shaft PUREing - Does It Actually Help? PURE vs Non PUREYouTubeStart of suggested clipEnd of suggested clipLike they don't do any special procedure to the shaft they just spin the shaft.MoreLike they don't do any special procedure to the shaft they just spin the shaft.
How do you pure a golf shaft at home?
How to Pure a Golf ShaftClamp the grip end of the club in a vise. ... Test the alignment of the spine. ... Tape a strip of masking tape around the shaft just above the club head. ... Remove the club head and grip from the shaft.Find the dominant spine of the shaft with a spine finder. ... Fit the club head and grip to the shaft.More items...
What is spine alignment?
When your spine is in alignment, it means that the vertebrae are stacked vertically, This keeps the body, from the head to the feet, in a reasonably straight position. An aligned spine not only gives you good posture, but also helps prevent pain, stiffness, and related issues.
How do you Flo a shaft?
8:1715:58How to FLO a Golf Shaft (correct position of shaft alignment) - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo when I was referring to twing or ping or whatever you want to call it. That's how you do simplyMoreSo when I was referring to twing or ping or whatever you want to call it. That's how you do simply put a little pressure on the shaft.
What is shaft Pureing?
You may have heard golfers say something like, “my shafts are pured.” To have a shaft that's “pured” is just another way of saying that the shaft has gone through an SST Pure analysis to ensure it's in the most beneficial orientation for consistent performance when attached to a club head.
What position is the spine in golf?
The theory of spine aligning is that the golf shaft will perform better if the shaft is aligned in the clubhead so that the spine is “downline” with the direction of the golf shaft (so the spine would be in the 3 o’clock or 9 o’clock position – also called the neutral position.) Indeed it does seem to make sense that if the stiffer spine is in ...
How many different directions does a golf club head bounce?
Then try it with a club that is NOT properly spine aligned. The difference is amazing…. the shaft/clubhead bounces all over the place, in about 50 different directions.
Is the spine stiffer on a golf shaft?
First, every golf shaft has a “spine”, and that spine is stiffer than the rest of the circumference of the shaft. (Nobody should argue that the spine is not the stiffest part of the shaft, but proof can be seen when rotating a shaft on a frequency machine. You get a stiffer reading when the spine is oriented the direction the shaft is deflected.)
What is a spine?
The spine is the part of the shaft that is more resistant to bending than any other part.
What can be done?
I start by finding the shafts spine, once found, I align and install the shaft into the club head so the spine works with your swing and not against it.
An added benefit
On a graphite shaft the normal position for the shafts spine is face up, this gives the shaft optimum resistance to shaft drop. (For info on shaft droop read up on the effect of shaft flex and club length on lie angles on the loft and lie page)
Some history
In February 1999 the golf’s governing bodies modified the rule on golf shafts that required all shafts to “bend symmetrically in all directions”, they decided it was no longer against the rules to orientate the shaft in the club head, as long as the shaft imitated the effect of bending symmetrically (you are not allowed to orientate the shaft to make a club that produces a draw or fade)..
Shaft orientation also know as spining, puring, or optimizing USGA Ruling
Because of a change in the interpretation of a USGA rule. Rule 4-1b states: b. SHAFT The shaft shall be generally straight, with the same bending and twisting properties in any direction Appendix II 4-1b states, BENDING AND TWISTING PROPERTIES.
Some science
An independent study on spine alignment was undertaken by Golf Science Consultants Inc, performed by J.
What Others Say
Tom Stine, PGA Tour Partners Magazine. September/October 2002: “The bottom line is that if the spines are not set in the club heads at the proper angle in relation to the clubface, we are not getting the most out of our golf clubs and we will continue to have golf clubs that will perform differently than others.
How to practice golf tee?
It’s a good practice exercise to place a golf tee beside your golf ball. After impact notice where the divots started in relation to where the ball was. Slight press forward with shaft. In your set a position, take a look at your hands in relation to the club head and golf ball.
Why is it important to lie golf clubs?
The lie of the club is very important because when addressing a golf ball you start with positioning the clubhead first. How to position the clubhead when addressing the golf ball.
What happens if you can't get paper under the toe of the golf club?
If your friend is unable to get the paper under the toe of the club at all, the club is too upright. The grip end should be lowered slightly which will result in a more toe up club head position. Then the paper should slide in just short of the middle of the clubhead.
How wide should your shoulders be?
The width of your stance should be approximately shoulders width apart. This can range slightly. A good range is your shoulders width fitting between your feet for a slightly wider stance. Your shoulders width to the very outside of your feet for a slightly narrower stance, is also an option.
Can you change the position of the golf club head on the ground?
You’ll have to make slight adjustments to fit where the handle of the golf club is, remember not to change the lie of the club head on the ground in the process. If you’re on the shorter side you’ll have very little knee bend, perhaps none at all, and only a slight tilt forward with your spine angle.
