How to Install a Shaft in a Golf Club
- Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club.
- Cut the shaft to the proper length, depending on what club you are modifying. There are websites that can help you determine the length.
- Roughen the tip of your new shaft before inserting it into the hosel of the club head. ...
- Apply epoxy to the tip of the shaft and the inside of the hosel of the club head, and insert the shaft into it.
- Prepare the shaft for its new grip. Place double-sided tape on the shaft where the grip will be placed and soak it with grip solvent.
How to install a golf club head?
Step 1. Tape the club head with masking tape to prevent it from being scratched during installation. Place shaft firmly in the vise. Step 2. Making sure the hosel in the club head is clean, apply epoxy all around the inside of the hosel. Also, apply epoxy around the end of the shaft where the club head goes.
How do you epoxy a golf club head?
Making sure the hosel in the club head is clean, apply epoxy all around the inside of the hosel. Also, apply epoxy around the end of the shaft where the club head goes. Gently, push the shaft into the hosel of the club head, turning the shaft at the same time.
What glue do you use to stick club heads to shaft?
Golf club heads are attached to the golf shaft with epoxy glue. Epoxy is a thermosetting polymer that is a high strength adhesive. Two parts, the resin and the hardener, are mixed together to create a chemical reaction that cures the epoxy to hardness.
How do you remove a shaft from a golf club?
The old shaft - or whatever is left of it, must be removed from the club head. To do this, you must apply enough heat to the hosel to break down the epoxy adhesive between the shaft and the head. A heat gun or torch can be used. If you are replacing a shaft on a wood or hybrid that
How do you attach a driver shaft to a head?
4:297:38How to Install Graphite Golf Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipRemove the head and place some epoxy inside the hosel dip the tip of the shaft into the epoxy mix.MoreRemove the head and place some epoxy inside the hosel dip the tip of the shaft into the epoxy mix. And then install into the head rotate.
How do you glue a golf head to the shaft?
3:396:41HOW to FIX your GOLF CLUB if the HEAD comes off | Easy TutorialYouTubeStart of suggested clipEnd of suggested clipAnd just mix that around into the glue. And onto the shaft. Then i'm just going to take the headMoreAnd just mix that around into the glue. And onto the shaft. Then i'm just going to take the head that i'm gluing back on and i'm just going to pour a load of glue. Into the bottom of that.
How do you install a golf club shaft?
5:117:44SHAFT INSTALL Steel - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce the ferrule is in position take the head and push the ferrule into its final position tap theMoreOnce the ferrule is in position take the head and push the ferrule into its final position tap the butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel.
What glue is used for golf club heads?
Golf club heads are attached to the golf shaft with epoxy glue. Epoxy is a thermosetting polymer that is a high strength adhesive. Two parts, the resin and the hardener, are mixed together to create a chemical reaction that cures the epoxy to hardness.
How do you fix a golf club head coming off?
2:0514:23LOOSE GOLF CLUB HEAD / How To Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipAhead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them backMoreAhead put a little bit of epoxy. In that space between the ferrule. And the hosel squeeze them back together wipe it clean let it dry.
Can I use JB Weld on golf clubs?
Jb Weld can be used on both metal and plastic golf clubs. It is non-toxic and safe to use on most surfaces.
How do you Reshaft a golf club at home?
2:2522:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heatMoreUp the house'll. Pull the shafts you don't need a shaft puller. Anything like that you can just heat them up and twist them off because it's a steel shaft.
Can I Reshaft my own golf clubs?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
How do you put a shaft on an iron?
HOW TO RESHAFT GOLF CLUBSSteel Shafts: To remove a steel shaft from a metal wood or iron, place the shaft in a super lock tight shaft holder. ... Measure the shaft tip. ... After the tip has been trimmed, abrade or roughen the shaft tip. ... Align the shaft graphics the way you want them by rotating the shaft.More items...
Can you use regular epoxy for golf clubs?
Unless you have to, do not use non-golf specific epoxies. Use epoxy designed for golf as they usually have higher peel sheer strengths and elastic properties that hold well during impacts specific to a golf club hitting a golf ball.
Can you use Loctite on golf clubs?
1:302:53LOCTITE Success Story: PING Golf - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo they have a steel color with a lock type product that we use in our irons. It actually has a greyMoreSo they have a steel color with a lock type product that we use in our irons. It actually has a grey color to it. So they're using that grey Loctite adhesive.
Do you need a ferrule on a golf club?
Does Every Club Need Them? Almost all modern clubs are designed to require a ferrule. Any club that has a clubhead with a neck that ends abruptly, almost all clubs have this, require a ferrule. Some older clubs have a tapered neck which means they fit the shaft in a really flush way.
How to remove a golf club shaft?
Step 1. Remove the old shaft. It can be done by melting the glue, or epoxy, that holds the shaft to the head of the club. Use a blowtorch or a heating gun for this purpose. Aim it at the hosel--the connecting part of the head--until the epoxy softens and you can easily remove the shaft.
How to put on a golf grip?
Place double-sided tape on the shaft where the grip will be placed and soak it with grip solvent. Pour a small amount inside the grip, then swirl it around until it is completely covered. Pour out the remaining solvent onto the double-sided tape, then put on the grip, making sure it is firmly set on the butt of the club.
What to use to insert graphite shaft?
If you are inserting a graphite shaft, it would be best to use a belt sander because you can easily damage it by using sandpaper. Also, rid the residue of the old epoxy for the hosel by using a wire drill bit.
Introduction
Steps to replace an old golf club shaft with a new steel shaft and replace an old grip with a new one.
Step 1 Golf Club Steel Shaft and Grip
Using propane or a torch, heat the hosel of the club to remove the steel shaft from the club head. The heat will break the epoxy bond that holds the head to the shaft.
Step 2
Use a wire brush to clean out the remains of the old epoxy from the club head.
Step 3
Use a piece of sand paper or a grinder to roughen the tip of the shaft where it connects to the hosel of the club head.
Step 4
Pour epoxy into a container and stir to mix it together. Once epoxy is mixed together, spin the shaft tip into the epoxy to prepare for insertion into the head.
Step 5
Insert the shaft into the club head. Hold the head and shaft together for approximately 30 seconds to secure.
Step 6
To replace the grip of the club, place the club on a level surface where you can cut a straight line through the grip using a razor blade or a utility knife.
Series Navigation
Using epoxy to install a shaft is not a difficult task, but I think some people get a bit confused when dealing with different types of golf clubs. Putters are fairly easy to do, but when re-shafting irons and woods, we have to install the ferrule as well, which is a bit confusing to the novice.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
Instructions
Tape the club head with masking tape to prevent it from being scratched during installation. Place shaft firmly in the vise.
About The Author
Tami Fisher received her undergraduate degree in mathematics, while also receiving a full-ride golf scholarship. She has extensive experience in the golf industry, as well as the employee benefits area. She is a die-hard Kansas basketball fan, and loves all sports.
