how to build a golf green in back yard

How to Build a Golf Green

1. Choose a location. Your green should be built on a spot that has sandy soil, plenty of sun and good drainage.
2. Excavate the area of your golf green to a depth of 20 inches (51 cm). ...
3. Design the green. It should have a variety of slopes to challenge you, but ultimately slope away from the center.
4. Install the drainage system in 8-inch (20 cm) trenches to ensure that water will drain away from the center.

How to build a golf green?

Your green should be built on a spot that has sandy soil, plenty of sun and good drainage. The location must also allow for breezes to come through in order to keep the grass healthy. 2. Excavate the area of your golf green to a depth of 20 inches (51 cm).

What makes a good backyard putting green?

Small narrow spaces can still effectively be used to create good backyard putting greens. The design is simple and straight-forward – a rectangular turfed area with two holes to practice on. A backyard putting green such as this one is perfect for the homeowner with a quaint backyard but a large passion for golf.

How do you put artificial grass on a golf green?

You may want to put more than one hole on your green, depending upon the size, so that a friend can practice at the same time. Then, lay down the sheet of synthetic grass. Get a friend to help you as you pull the turf taut, and then fix it in place by hammering in the weed-mat pins.

How do you separate a putting green from the rest of yard?

Clear cut boundaries can be used to separate putting greens from the rest of the yard. In this example, small wooden retaining walls were used to separate the backyard putting green and its artificial turf covering from the tree and grass parts of the yard.

How much does it cost to put a putting green in your backyard?

between $11 and $25 per square footPutting Green Installation Expect to pay between $11 and $25 per square foot to have a backyard putting green installed. This pricing could change based on size. The larger your golf green, the less you'll pay per square foot; most contractors lower their rates for bigger projects.

How do I build a cheap putting green in my backyard?

0:485:41Build Your Own DIY Putting Green | Gardening | Great Home IdeasYouTubeStart of suggested clipEnd of suggested clipBut before we put the turf down we need this build a strong footing and that starts with road bags.MoreBut before we put the turf down we need this build a strong footing and that starts with road bags. Get it level first and then you can add more road base to give it shape.

How do you prepare the ground for a putting green?

Remove all the plants, roots, weeds, and natural turf on the installation site. You should remove about 3-4 inches of soil and replace it with compacted class 2 permeable base rock to ensure a solid foundation. DON'T disregard the plumbing.

How do you make a real golf green grass?

0:5814:39DIY: Make Your Own Putting Green With Real Grass (Video 2) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then we came through and we put down a fertilizer with the new troe Pete Green's grade 1704MoreAnd then we came through and we put down a fertilizer with the new troe Pete Green's grade 1704 fertilizer I've been excited so far with the performance we're about 24. Days into this process.

What kind of grass is used on a putting green?

Grasses are specifically selected for use on putting greens. Bermudagrass, creeping bentgrass and Poa annua are the most commonly managed turfgrasses on putting greens in the United States.

What kind of mower is used for golf greens?

reel mowerThe best type of mower to produce golf course quality turf in your home lawn is a reel mower. A reel mower uses a reel and a bedknife to cut the blades of grass like a pair of scissors, unlike a rotary mower which typically has a single blade with a sharpened edge spinning at high velocity that doesn't cut as cleanly.

What goes under a putting green?

4:598:07How to Build the PERFECT Home Putting Green - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then in order to actually make this putting green roll. True what they do is they actually put aMoreAnd then in order to actually make this putting green roll. True what they do is they actually put a fine layer of sand on top then they get the compactor. And they compact it one more time.

How do you make a golf green sand?

5:1612:12Backyard Putting Green Maintenance - Aerate Sand Reel Mow - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt can go down in the nutrients will go a little bit deeper. So but i can hit a golf ball acrossMoreIt can go down in the nutrients will go a little bit deeper. So but i can hit a golf ball across this we just double spiked this whole green. And if i just give it a medium tap.

How do you lay green grass?

1:072:27How to Install Artificial Grass | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipRoll out the turf and line one edge up with the edge of your yard tap landscape spikes into theMoreRoll out the turf and line one edge up with the edge of your yard tap landscape spikes into the ground about every foot along the edge to hold the turf in place. If you're using two pieces of turf.

Why do they put sand on golf greens?

Sand helps cushion leaf tips and crowns and reduces algae. Increased Firmness – Turf produces organic matter in the upper rootzone that creates soft, spongy playing conditions. Regular sand topdressing, along with core aeration, improves surface firmness and resiliency.

How to mark the edges of a golf green?

Mark the edges of your green by sodding the perimeter with rougher grass. You may want to add a vapor barrier around your green before sodding to keep the surrounding area from sucking water away or adding water to your green. Buy your cups, pins and flags from a supplier of golf course equipment.

How to make green grass uneven?

Seed or sod your green. Sodding often results in an uneven green, so seed instead if you have the time and patience to care for the grass until it matures. The variety of grass you will use for your green will largely depend on your climate.

How to keep grass from drowning in rain?

Cover the area with a 4-inch (10 cm) layer of pea gravel. The gravel will hold water near the roots when you irrigate the green, but will allow water to pass through quickly during heavy rain so the grass doesn't drown. Compact the gravel layer. Add 2 inches (5 cm) of sand on top of the gravel and compact it.

What is wikihow in golf?

wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time. This article has been viewed 175,356 times. Learn more... Many golf enthusiasts build golf greens in their back yards so they can practice putting ...

What type of grass is best for putting?

Bentgrass. This will withstand winter damage and give you an even putting surface.

How long can a golf club be?

It can be as long as you want it to be . The bigger thing to keep in mind is width -- the wider the approach the less concentrated the wear as golfers walk onto the green.

How to make a depression in a green?

If you want to have a depression in your green, you must install a drain pipe beneath it to carry away the water. However, this won't work if you build a green in a climate where the puddle will freeze during winter.

Artificial vs. Natural

There are purists who'll insist upon having a natural grass practice green in their backyard. And it seems like a good cheap solution, since you can buy a 5-pound (2.2-kilogram) sack of grass seed specially developed for golf courses for under $60 [source: Amazon ].

How to Build Your Practice Green

U.S. President Barack Obama and Vice President Joe Biden practice on the White House putting green.

What is a putting green in a backyard?

A golf backyard putting green is a great way to practice the sport from the comfort of your own home. A putting green can be constructed in your backyard that will provide hours of enjoyment as well as increase your house’s resale value. On this page you’ll find pictures of backyard putting green designs to give you inspiration for creating your ...

How to stabilize a gravel driveway?

The first step is to lay the base materials. This is an important part of the build since it helps stabilize the earth which is important especially for less than stellar ground conditions (e.g. flood prone backyards). The finer the grain size of the gravel, the better it will be for stabilization. Using a plate compactor, compact the laid out gravel; this shouldn’t more than an hour or so.

How much does synthetic grass cost?

The convenience factor is one of the main selling points of choosing synthetic turf. The cost for synthetic grass can run from around $5 a ft on up to $25 depending on the quality you select and whether you will be installing the turf yourself.

What is the second step in a gravel bed?

The second step is to add the geo-textile fabric covering. This is rolled over the entire gravel bed to stabilize the green as well as to prevent any unwanted weeds from sprouting into the panels.

Can Mediterranean houses be used for putting greens?

Mediterranean houses can also effortlessly sport backyard putting greens. Here we see the turf working its edges around the geometric patterns of the backyard’s landscaping, creating interesting putting pockets and a more challenging way to practice your short game in golf.

Is putting green in desert?

This larger backyard putting green is set in an arid and relatively dry environment which becomes somewhat apparent after noticing the many cacti and palm tree species in the backyard. But desert weather does little to hamper the passions of a true golfer.

Can you have more than one putting green in a luxury home?

Luxury homes can afford to large sprawling putting greens and, in the case of this one, even more than one turfed areas. The double putting greens in this backyard can cater to more than one user at a time and with its numerous practice holes, can function effectively as a practice area for golfers.

How much does it cost to build a putting green?

Especially because most golf putting green estimates list the materials at 3-4k alone!

How much infill does a lawn need?

The turf we purchased called for 1-2 lbs / sq ft of premium infill.

How much adhesive do you use to adhere stone caps to pavers?

We used outdoor construction adhesive (3 bottles worth @ $6 each~ $18) to adhere the stone caps to the paver blocks. Make sure the area is clean and dry, and then use an “S” or zigzag pattern when you lay the adhesive to cover the most surface area.

How deep do you dig for pavers?

The pavers needed a min base of 4″ gravel or stone (we used the same stone from before). So, the dig had to dive 4″ further than the level point with the putting green.

How much does it cost to rent a sod cutter?

PLEASE DON’T SKIP THIS STEP! If you’ve got a full bed of grass you’re planning on replacing with the green, renting a sod cutter makes this process go a lot faster (~$60 for 4 hours at the Home Depot) than digging it out by hand. Because we were on a budget, we opted to dig by hand. Blisters were abundant.

Do you have to factor in the fringe area for putting green?

When we excavated the area for the putting green, we didn’t factor in the fringe area. (When we began the dig, we never planned on having a fringe/stone surround.) But we learned quickly that the slope in the yard made it unavoidable, and it certainly gives the green quite a professional look (for not much extra money. ~$300 total) So, we had to measure and string out each side, mark, and dig out the perimeter in order to allow room for the pavers (and fringe).

When cutting turf, do you use a razor blade?

When cutting, make sure to use a very sharp razor blade. And switch this razor blade after every section. *Insider Tip: ALWAYS cut from the back side of the turf!

How to lay out a turf lawn?

First, unpack all your materials and lay them out near your green site. Unroll the turf, ideally in the sun, so it can flatten. Next, place the geo-textile fabric over the compact aggregate and then lay the base panels over that. Lay out the base panels starting at the outside and work toward the center panels, then click them together.

How to make fringe look more finished?

Using a seam roller will make the fringe look more finished and natural. The very last step will be cutting the putting turf for the holes. Poke a hole in the middle of the cup, make an X toward the edges, then cut the edge of the circle using the cup as your guide.

Can you get a putting green in your backyard?

With your new backyard putting green, your house is sure to become the favorite hangout of all your golf friends. And with your superior knowledge of every break on the green – you created them – you can start recouping the cost of the green by racking up wins in backyard putting matches.

Choose a Location and Design

There are many options for designing and making a DIY backyard putting green with synthetic turf. Do some research to choose the best installation process and putting green design for your yard. Once it’s installed, follow the manufacturer’s instructions on how to use and maintain the synthetic turf.

Outline the Green and Remove Sod

Once you’ve finalized your design, use spray paint to outline it in your yard.

Dig and Prevent Weeds

Excavate the area inside the outline. As a rule of thumb, go four to five inches deep for a crushed rock base. Spray a ground-clearing, long-term weed killer and put down a layer of landscape fabric over the bare dirt to ensure weeds and grass won’t grow back.

Put the Cups in Place

Another crucial step in installing a backyard putting green is deciding where the cups will go. The cups have holes in them, but if desired, dig small trenches leading from the cups, past the green, so rainwater can drain out. Put gravel in the trenches. Mark the locations for the cups so you can find them later.

Make the Base for Your DIY Putting Green

To make the base for the putting green, put crushed stone, such as 1/4-inch to 3/8-inch unwashed, crushed limestone, into the excavated area. Spread the crushed rocks out evenly with a rake or shovel.

Pre-Shrink if Needed and Join Sections

Most synthetic turf is already sized, but if your manufacturer recommends it, unroll the turf and pre-shrink it by spraying it with a garden hose until it’s saturated. Let it dry for at least 24 hours.

Install and Cut the Synthetic Turf

Next, put the synthetic turf, or artificial grass, over the crushed stones and carefully cut out the shape and size of your design with a sharp utility knife.