The DIY Disc Golf Basket: Building Instructions Step 1: Using a circular saw with a metal blade, cut the top and bottom off the steel barrels at about eight inches deep. Once you have cut them, you can smooth the edges using a metal file.
How much does it cost to build a disc golf basket?
After about a year of playing disc golf, a fellow thrower (we'll call him Boomer, because that's his name) called and said "I found some basket plans online for $10. Wanna split it and build a couple baskets?"
What are the parts of a disc golf basket?
There are three main parts to every disc golf basket. The first one is the pole and the main basket, while the second part is the chain. The last part is the frame and the lower basket.
How high should a disc golf basket be?
As per the PDGA, a disc golf basket should be 52 inches above the ground, and the distance from the floor towards the lower basket is 25.7 inches. Although, during competition, tournament rules may change depending on the preference of the organizers.
How to use a disc golf disc chain?
The primary purpose of the chain is to stop the disc golf discs when they hit the goal while dropping it into the lower basket. Make many holes on the halo ring of the upper ring, then attach the chains using the snap links. Meanwhile, the other end of the chain will be put together at the center of the post using a 5 inch hose clamp.
How do you make a cheap disc golf basket?
0:1613:57How to Make a Disc Golf Basket | I Like To Make Stuff - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is actually from the fencing. Section and this is a post for a chain-link fence. And then toMoreThis is actually from the fencing. Section and this is a post for a chain-link fence. And then to wrap the whole thing together we've got some other things out of that same section of the store.
How much does it cost to make a disc golf basket?
A friend and I built some baskets. The total cost was about $20. We built 6 and set up a course on his property.
How do you make a homemade golf cart disc?
1:4619:34DIY Disc Golf Cart - Build Special - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's just you fold it down it clicks into place it's got two smallish wheels on the outside. And youMoreIt's just you fold it down it clicks into place it's got two smallish wheels on the outside. And you can expand it up like that clicks into place you can pop your bag on there.
What are the dimensions for a disc golf basket?
For a basic disc golf basket, the rim must be around 21 ⅓ inches wide, and the chain must not be lower than the 22 inches below the rim. The lower basket should be 25.7 inches wide with a height of 6.7 inches. Also, a basic disc golf basket will have less the 18 chains installed.
How many feet of chain do I need for a disc golf basket?
Chains and Disc Golf Baskets The minimum chain length, dictated by the PDGA, is 9 inches. And the minimum number of chains around the basket is 12. This is not to say you will not see homemade versions with chains as long as 24 inches, but in PDGA sanctioned events, the measurements will meet their specifications.
How do you make a wooden disc golf basket?
1:3617:12$27 Disc Golf Basket - All Materials Purchased - YouTubeYouTubeStart of suggested clipEnd of suggested clipGot all the bottom pieces nailed on and now I'm going to cut some two by fours to make braces.MoreGot all the bottom pieces nailed on and now I'm going to cut some two by fours to make braces. Across the bottom these will make the bottom a little stronger.
What are disc golf baskets made of?
The disc golf goal is made up of two baskets attached to the center post. The two baskets will have the same, 1″ steel flat bar band welded to some bent 1/4″ steel rod. The rods are bent into an “S” shape and turned on their sides. I used a manual ring roller to add a curvature to the flat steel.
How do you make a ZUCA disc golf cart?
3:378:53ZUCA Compact Disc Golf Cart Unboxing and Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is to get these little two divots on this inside of the wheel facing inwards. So you make thisMoreThis is to get these little two divots on this inside of the wheel facing inwards. So you make this wheel the outermost item. And then you get this spacer and you bring this in here.
How do you build a push cart in golf?
2:354:42DIY - Baby Jogger conversion into a Golf Push Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's basically took off all the previous seat from the stroller jogger. And basically made justMoreSo it's basically took off all the previous seat from the stroller jogger. And basically made just into a naked Stoller. And I disconnected this basket and attached it back here.
How many baskets do you need for disc golf?
In order to play disc golf, you need at least 3 discs: a driver, a mid-range, and a putter. But you should carry at least 6 discs (2 of each type) with you whenever you go out to play a round.
How big is a disc golf hole?
The PDGA recommends that courses average 200–400 ft (61–122 m) per hole, with holes no shorter than 100 ft (30 m). The longest holes in the world measure more than 1,500 ft (460 m) long.
How much does it cost to make a disc golf?
A disc golf course can be created for as little as the cost of the targets (baskets). A nine hole course can cost less than $3,000. Installation labor is relatively easy and can often be accomplished with volunteer labor from Eagle Scout projects and local disc golf clubs.
How much does a disc golf hole cost?
We'll assume the land is available already, but that's an additional major expense if it's not. A barebones installation with light duty baskets, natural tees and simple wooden signs and do-it-yourself design (not recommended) can be installed for about $350 per hole.
How much does a disc golf basket weigh?
DGA Mach 2 Outdoor Practice BasketAssemblySome tools requiredStoragePermanent Outdoors OKConstruction & FinishHeavy-Gauge Hot-Dipped Galvanized SteelWeight50 lbs.4 more rows
How do you make a disc golf tee pad?
2:5910:32Disc Golf Tee Pads Made Easy - YouTubeYouTubeStart of suggested clipEnd of suggested clipHours now to build one of these double frame disc golf tee boxes you're gonna need some simple toolsMoreHours now to build one of these double frame disc golf tee boxes you're gonna need some simple tools nothing complicated. You got a couple shovels. We have a tamper. Here. An electric drill.
Step 2: Cut Notches Into Fence Post Top
Using a right angle grinder cut 4 notches on the top of the fence post.
Step 3: Drill and Tap Pan Mounting Holes
26 inches down from the top of the fence post (the end with the notches), drill 3 holes 13/64inch diameter equally spaced around the fence post.
Step 6: Drill Drip Pan
In the center of the 26 inch water heater drip pan, drill a hole 2-3/8 inches
Step 7: Draw Pattern and Bend Ring to Match
Draw pattern above onto scrap of paper. Circle should be 22 inches in diameter.
Step 8: Cut and Bend Cross Pieces
Cut second tension bar into three pieces. 1 at 26 inches long and 2 at 16 inches long
Step 9: Drill and Bolt the Cross Pieces to the Ring
When drilling the pieces for middle cross, make sure the holes are 2-1/2 inches from the center / intersection
Step 12: Attach Chain to Ring
Unbolt ring from cross pieces two sections at a time and slide chain lengths onto the ring
How to make a disc golf basket?
Step 1: Using a circular saw with a metal blade, cut the top and bottom off the steel barrels at about eight inches deep. Once you have cut them, you can smooth the edges using a metal file. Step 2: The top of your disc golf basket (either a trash can lid or a portion of the steel barrel) can be reinforced with plywood.
How many holes can you make disc golf baskets?
But if you do have a big piece of property and a successful first attempt at a DIY basket, you can keep building even more disc golf baskets for a 9 or even 18-hole course right in your own yard. Try to space out the holes as evenly as possible in your yard.
Where do disc golfers practice?
Disc golfers love to play and practice anywhere and everywhere. Sometimes your local course is simply too far away to make it practical for everyday play, but that does not have to stop those who love the game.
Can you build disc golf baskets in your yard?
Not everyone has a large enough yard for a full course; you may be building a DIY disc golf basket just for practice throws at home. But if you do have a big piece of property and a successful first attempt at a DIY basket, you can keep building even more disc golf baskets for a 9 or even 18-hole course right in your own yard.
Why make your own basket?
Making your own basket will not only help you save a couple of bucks but also give you an excuse to invite your friends over for a fun, intimate picnic with the kids over the weekend.
How to secure PVC to the ground?
You can use an umbrella base or cement to secure the PVC to the ground. Use a pothole digger to dig deeper if required. Warning: Drill plenty of holes into the bottom of the basket to flush out any rainwater from flooding on the inside. Set up Your Own Affordable Disc Golf Sets in Your Own Backyard!
How deep should a disc golf basket be?
Your fence post should be 66-inches tall and a disc golf basket is about 55-inches tall. That means you need to dig a hole 11-inches deep. A post hole digger works best for this. Dig the hole a few inches deeper to add some gravel for drainage.
How to tighten a whiskey barrel?
Loosen the hose clamp on another of the 1-1/4-inch to 1-1/4-inch rubber coupler halves and slide over the pole. Push it down tight over the whiskey barrel assembly and tighten the hose clamp.
How to make a PVC sleeve?
It should be real close to 12 inches. Make a mark every inch or so, about 3/4-inch down from the open end. Drill a 7/32-inch hole at each of these marks. Insert a 3/16-inch x 1-1/2-inch eyehook in each hole and secure with a nut on the inside of the PVC coupler. Tighten each one down pretty well, but be careful not to crack the PVC. Once all the eyehooks are secured, use the bolt cutters to cut off some of the extra threaded part of the eyehook inside the PVC coupler.
How to make a whiskey barrel liner?
Hang chains on each of the S-hooks on the grill grate. Crimp the S-hook closed around the chain. Open one of the 3-1/4-inch hinged locking rings, place it around the fence post inside the whiskey barrel liner and begin threading the chains on the ring. When all the chains are in place, close the ring. Now attach S-hooks to each of the eye-hooks on the PVC piece; crimp the S-hooks closed. Hang chain on each of the S-hooks and crimp the S-hooks closed. Thread the inside chains on the remaining hinged locking ring, alternating the inside chains between the outside chains. Close the ring and throw a putt.
How high should a fence post be for a basket?
Figure out how your finished basket will be mounted (see last step). If it will be in a patio umbrella stand, then cut the fence post to a height of 57-inches using your hack saw. If you will be mounting your basket in the ground, then leave the pole alone.
How to secure S hooks on grill?
With pliers, crimp the S-hook closed around the grill grate. For the two S-hooks that rest near the handles of the grill grate, secure them in the center position with three zip ties as shown in the picture.
