how to build ladder golf with pvc

1. Cut your PVC pipe to size. For a ladder, you need five pieces two feet in length and eight pieces one foot in length. ...
2. Drill a 3/8” hole through each golf ball. Be very careful on this step to make sure your golf balls are properly secured to a clamp when drilling ...
3. Paint your PVC pipe rungs and golf balls your desired colors. ...
4. Cut your nylon rope into 20” pieces. Tie one end of the rope into a knot, and melt the end with the lighter. ...
5. Once all of your paint has dried on your PVC pipes, assemble your ladder. Connect the two 90 degree brackets to either side of your top rung. ...
6. All of your pieces should be assembled, and now you can invite all your friends over to play! ...

How do you make a ladder golf game?

Build a Ladder Golf Game. 1 Step 1: Step 1: Cut the Pipe and Join Together. The dimensions for the game are 24" wide and 13" between the ladder rungs. I made the base 13" forward ... 2 Step 2: Step 2: Make the Bolas. 3 Step 3: Step 3: Play Ladder Golf. 4 Be the First to Share. 5 Recommendations.

How do you make a ladder out of PVC pipe?

Step 1: Cut your PVC pipe to size. For a ladder, you need five pieces two feet in length and eight pieces one foot in length. If you would like to play with two ladders (which makes the game a lot faster because you don’t have to walk back and forth to retrieve your bolas) just double your PVC pipe pieces.

Can you make a golf game set out of PVC pipe?

Ladder golf game sets can be purchased online, but below are instructions on how to make your own out of PVC pipe for just a few dollars. Be sure to check out the slideshow above for 21 more fun games for the backyard or lawn. Step 1: Cut your PVC pipe to size.

How many steps are in a ladder game?

The ladder consists of 3 steps, a top, middle and a bottom step. The top step scores 3 points, middle 2 and bottom 1 point. Players throw their Bolas until all 6 are thrown. The winner is the first person to reach exactly 21 points. The dimensions for the game are 24" wide and 13" between the ladder rungs.

How do you assemble ladder golf?

0:263:01How To Play Ladder Ball - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe game has two ladders. And six bolas. Three bolas for each. Team. The ladders are set up acrossMoreThe game has two ladders. And six bolas. Three bolas for each. Team. The ladders are set up across from each other 15 feet apart. This distance can be changed based on player.

How do you make a ladder ball frame?

0:207:59DIY Ladder Ball Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipLong seven pieces of 3/4 inch PVC. 2 foot long 12 golf balls some rope for the golf balls that's 3/MoreLong seven pieces of 3/4 inch PVC. 2 foot long 12 golf balls some rope for the golf balls that's 3/16 inch nylon rope. I got some glue to put the PVC together. And it comes with the primer.

How do you build a lawn golf?

How do you make ladder golf?Cut six of your 24″ pipes in half to make twelve 12″ pipes.Wrap six of the 24″ pipes in vinyl.Lay out the horizontal bars, then the t's and elbows.Add the vertical bars and attach all pieces together.Build base with six 24″ pipes. ... Attach the base to the top of the goal.

How do you do a hillbilly golf game?

You take a rope with two golf balls attached to each end (called Bolas) and throw them at the opposing ladder. If your bola wraps around the bottom rung you get one point, if it wraps around the middle rung you get two points and if the bola wraps around the top rung you get three points.

How far apart are ladder balls?

13” apartGolf Balls are spaced 13” apart. Ladder: The ladder is the structure that consists of 3 steps each spaced 13 inches apart. Steps or Rungs: Each ladder has 3 steps. The top step is worth 3 points, the middle 2 and the bottom 1 point.

How do you make a 2x4 ladder?

0:231:49How to Make a 2x4 Blanket Ladder - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart by cutting your wood you'll need to six foot lengths of 2x4. And for 18 inch pieces to make upMoreStart by cutting your wood you'll need to six foot lengths of 2x4. And for 18 inch pieces to make up the rungs lay. Them on a large flat surface.

How do you build a ladder?

2:3421:14How to Make a Ladder | Easy Ladder Build - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo i started with some six quarter pieces that would make up my two. Outside things i really shouldMoreSo i started with some six quarter pieces that would make up my two. Outside things i really should have looked up ladder terminology before i did this voiceover.

How do you make a wooden ladder in golf?

0:264:02How To Make The ULTIMATE Outdoor Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically this is a really simple build we're going to build two legs connect them with dowel toMoreBasically this is a really simple build we're going to build two legs connect them with dowel to form a free-standing structure.

How do you set up a hillbilly golf club?

0:003:10How to play Ladder Golf - YouTubeYouTubeStart of suggested clipEnd of suggested clipPoints exactly place the ladders uprights 15 feet apart or about five large paces. Give each playerMorePoints exactly place the ladders uprights 15 feet apart or about five large paces. Give each player on the same side three bolas of the same.

How do you make bolo balls?

To make ball/rope projectiles, called bolas, drill a 3/8” hole in the golf balls. A clamp can firmly hold your ball while being drilled. Cut the nylon rope into six 20” sections. Tie a knot on one end of the rope sections and melt the end with a lighter to keep the rope from fraying.

How do you make a pipe ball?

0:522:54How to Build a Ladder Golf Game out of PVC Pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter cutting all the lengths of pipe I assembled them into a structure as you can see here thenMoreAfter cutting all the lengths of pipe I assembled them into a structure as you can see here then repeated for the other. Side. Now on to the bolas. The bolas are what we throw at the ladder structure.

How long are the ladder golf balls?

Bolas made from real golf balls for, Ladderball, or ladder toss games. Woven nylon bands. Approx 16 inch rope length.

What are the dimensions of ladder ball?

Enhance your purchaseSport TypeGolfColor6 PackMaterialNylonItem Diameter16 InchesBrandHONESTY

How do you make a ladder ball out of wood?

0:264:02How To Make The ULTIMATE Outdoor Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipBasically this is a really simple build we're going to build two legs connect them with dowel toMoreBasically this is a really simple build we're going to build two legs connect them with dowel to form a free-standing structure.

What are the dimensions of the ladder toss game?

65.02 x 14.22 x 26.16 cmTechnical DetailsProduct Dimensions‎65.02 x 14.22 x 26.16 cm; 4.17 KilogramsColor‎Premium Version (2.5mm PVC Frame)Style‎Premium Pre-Weighted Base Thicker PVC (2.5mm) w/ Premium Weighted BolosMaterial‎PlasticNumber of Items‎15 more rows

How do you make a ball toss game?

4:147:22Duct Tape Crafts - DIY Ball Toss Carnival Game Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipBack just cut little triangles that you can fold it back it doesn't really matter how messy it looksMoreBack just cut little triangles that you can fold it back it doesn't really matter how messy it looks because it's going to be at the back and no one's going to be able to see. It.

How many pieces of PVC pipe do you need for a ladder?

For a ladder, you need five pieces two feet in length and eight pieces one foot in length. If you would like to play with two ladders (which makes the game a lot faster because you don’t have to walk back and forth to retrieve your bolas) just double your PVC pipe pieces.

How to tie a rope for golf balls?

Tie one end of the rope into a knot, and melt the end with the lighter. String two of your golf balls onto the rope, and then tie a knot on the other end. It can help to wrap a bit of masking tape around the end of your rope to help feed it through the golf balls.

Step 1: Get a Plan Together

As with any project you need to know a little bit of what you want to do before you start.

Step 2: Parts Needed

If you look at the image, you will see that the assembly is really quite straight forward. Here is what you need for Each Upright Fitings Click this link for a list of fitting on our site 2 - 3/4" Elbows - PVC 15-5 - top support 4 - 3/4" Tees - PVC25-5 - holds middle rungs 2 - 3/4" Slip Tees - PVC10-5 - the bottom pipe slips through these 4 - 3/4" Internal Caps - PVC77-5 - for the end of the bottom pipes to give it a finished look. PVC Pipe All pipe is 3/4" Schedule 40 PVC 4 - 1' foot cuts - inbetween top and middle bars. 2 - 20" inch cuts - inbetween base and lower bar. 5 - 2' foot cuts - rungs and base rails. Basically you need two 10' foot pieces per upright. Here is what you need for Each Bolo ~24" inches of nylon 2 golf balls.

Step 3: Putting It Together

Upright As far as the upright goes.. just look at the picture.

Step 4: Packing and Playing

Packing One of the nice things about building this way is that unit completely brakes down. The fittings seemed snug enough not to have to warrant gluing.

How To Make Your Own Ladder Golf Game

Learn how easy it is to entertain at home by learning how to make your own ladder golf game out of inexpensive PVC pipes and a few golf balls!

Instructions

1. Measure all of your pipe. *Note: we spray painted our game after it was initially built. All connector pieces were spray painted black the middle main bar was spray painted silver, and the top main bar was spray painted red. We did not chose these colors for any particular reason–that’s just the spray paint we had on hand.

How to make a ladder game?

Step 1: Step 1: Cut the Pipe and Join Together. The dimensions for the game are 24" wide and 13" between the ladder rungs. I made the base 13" forward and 24" backwards. Push the pieces into the joints to join, you can add adhesive if you wish, I didn't.

How many paces to throw from a ladder?

First a line must be set 5 paces from the ladder to throw from. I used a length of paracord and 2 pegs to mark this.