What are some interesting facts about one iron golf clubs?
An interesting fact about One Iron Golf is that they have been making single length golf clubs for over 20 years. Similar to Cobra, they offer three different product lines that are available in one length.
Are all single length golf clubs the same length?
As the name suggests, a set of single-length iron and hybrid clubs will all be the same length. It's most common for them to all be the length of a 7-iron (around 36.75"-37.5" depending on the set).
What are the best single length irons for beginners?
1 Cobra Golf Cobra Golf leads the way in variety on single-length irons and offers a range of 6 models to cater to the new demand. ... 2 Sterling Irons-Wishon EQ1-NX Single Length As far back as 2013, club designer Tom Wishon used his experience to improve what was then available on the market for single-length irons. ... 3 Pinhawk SL
Which Cobra golf irons are single length?
Cobra Golf offers three different iron sets as single length. They are all based off of a traditional 7i in shaft length. Cobra offers the following iron sets as one length:
Can you make any iron set single length?
For all intents and purposes, it is just not feasible to build a single length set from an existing incremental length set of irons. In a Single Length set, all the clubheads must be designed and manufactured to be the same exact headweight AND with the same lie angle.
Can you make any golf clubs one length?
Single-length irons—which can also be called one-length irons or same-length irons—are, their advocates believe, designed for easier and more effective play. The reason? Since all the clubs are the same length, golfers can use the exact same set-up and swing with every shot.
Can I cut my irons to one length?
1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the sameMoreSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard.
Should I make all my irons one length?
Single-length iron sets could be a good option for beginners and high handicappers. This group would only have to use one iron setup, which could accelerate learning. And they'd likely struggle less with longer-than-standard scoring clubs than with standard-length long irons.
Does Bryson DeChambeau use one length irons?
Pro Tips spoke with DeChambeau about his decision to use one-length irons. He shared the benefits he has seen and why he thinks they can assist golfers of any skill level. “These clubs can benefit literally everybody in the world,” DeChambeau says.
How long should single length irons be?
around 37-38 inchesIn general, all brands that offer single-length irons are around 37-38 inches (which is a normal 7-8 iron length). Most manufacturers allow you to add or remove up to 1-2 inches as well. In essence, you're basically playing with a bag of 7 irons with different lofts on each club.
Do any pro golfers use single-length irons?
DeChambeau is currently the only Tour player who uses single-length irons, but Norman said he thinks that could change in the future.
How do you hit single-length irons?
Bryson DeChambeau's 3 tips to hitting single-length ironsAdjust your ball position. If you've looked into one-length irons, you've probably heard that the higher-lofted clubs go higher than their variable-length equivalents, and the lower-lofted clubs go lower. ... Embrace the versatility. ... Accept the learning curve.
Should you shorten your irons?
Additionally, shorter length golf clubs can provide more control to the golfer, essentially making the golf club more forgiving. While longer clubs can help increase speed and launch angle, shorter clubs can be easier to hit solid due to the reduction in swing arc.
Did Bobby Jones use single length irons?
Although the concept of making each iron in a set the same length is not new (Bobby Jones used single length irons in 1930 to win the Grand Slam), never before has there been so much attention given to single length.
What happens if irons are too short?
What Happens When Golf Clubs Are Too Short? For most golfers, having clubs that are too short will be better than if they're too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You'll also have the tendency to push the ball a lot.
What length are DeChambeau's irons?
37.5-inchThat's right. DeChambeau plays all of his irons -- all of which have unique names -- with the same 37.5-inch shaft and has been doing it since 2011, when he made the switch -- from 3-iron to 60-degree wedge -- with coach Mike Schy.
Why use single length irons?
Because the ball position and club length are the same, you can use the same swing for every single-length iron, improving consistency and repeatability . Another positive of single-length irons and hybrids is ...
What are the drawbacks of single length golf clubs?
The biggest drawback of single-length golf clubs is you'll probably lose some distance with your lowest lofted clubs. Manufacturers and club fitters can work wonders to make appropriately gapped single-length club sets, but you'll always have more distance with a longer club (assuming all else is equal).
What is the difference between a 5 iron and a 6 iron?
A 5-iron, which has less loft than a 6-iron, will be slightly longer than the 6-iron. A 6 iron is longer than a 7-iron, and so forth. As the name suggests, a set of single-length iron and hybrid clubs will all be ...
Who makes the Cobra golf clubs?
If you're in the market for single-length golf clubs, you'll find that only a small number of manufacturers are producing them. Cobra, Bryson DeChambeau's sponsor and club maker, are by far the most noteworthy manufacturer in the space. Beyond Cobra, you'll have to look at more boutique brands like Sterling Irons.
Can you use one length irons in golf?
If your time is limited, one length irons may be perfect for you. No matter what iron you're practicing with in your little time to golf, you'll be grooving your swing with all the irons in your bag.
Do single length irons work?
One "con" that should be obvious is that single-length irons will take some getting used to if you've previously played with traditional-length golf clubs. For this same reason, we'd take reviews of one length clubs with a grain of salt from people who only used them for a day after using variable-length clubs their entire lives.
Is a 6 iron the same as a 7 iron?
A 6 iron is longer than a 7-iron, and so forth. As the name suggests, a set of single-length iron and hybrid clubs will all be the same length. It's most common for them to all be the length of a 7-iron (around 36.75"-37.5" depending on the set). Since the length of all single-length irons and hybrids are the same, ...
What is club head lie angle?
The club-head lie angles are known for the irons and fairway woods as well as the length of one side of the right triangle based upon your mathematically factored wrist-to-ground distance at impact. This gives us the measurement of two angles and the length of one side.
How to measure wrist to floor?
The wrist-to-floor measurement should be taken while standing on a hard surface. Wear jogging/gym shoes (not golf shoes). Stand with your back against the wall at strict military attention. Place your shoulders and head against the wall, your feet together, and your arms rigid and straight down at your sides.
What are 1 irons made of?
Because the 1 Irons are made with a harder-type cast steel (17-4 stainless), you won’t have to worry as much about the loft and lie angles drifting over time. Left Handed Clubs. If you are a left-handed golfer, fortunately they are available for you. Customer Service. It is excellent.
How many different swings can you learn with a club?
With a conventional set of clubs, you must learn and master 12 different swings using 12 different postures, swing planes, and ball positions. This means a lot of practice and it’s likely you’re going to have trouble making this work for you consistently.
Why is one plane swing better?
The one plane swing produces a dramatic increase in ball striking consistency because there are fewer moving parts. Add a set of clubs that have the same length, weight, flex, etc., and you’ve got a powerful match.
What is the purpose of every club in a set?
Every club in the set fits property which allow you to make a fluid, power swing. It just makes sense that in order for you to maximize your golfing potential, all of the irons within your set should have the same fitting and dynamic attributes as your favorite iron (same length, weight, flex, etc.).
Do new golf clubs come on the market every year?
Every year new golf clubs come on the market and each manufacturer raves about all the new specs and improvements that lead you to believe that new club is the one that will finally improve your rounds. Problem with that theory is that every year supposedly brings a better club.
What is single length iron?
You’ve probably heard about them by now: single-length irons. Rather than variable-length irons, where distance gaps are created in part because the shaft is longer in the longer irons and shorter in the shorter irons (hence the names), single length irons are all the same length.
Do one length irons go higher?
If you’ve looked into one-length irons, you’ve probably heard that the higher-lofted clubs go higher than their variable-length equivalents, and the lower-lofted clubs go lower. It’s a product of having variable lofts in shafts that are all the same length. Because of that uniformity in the length, though, many people tend to play ...
Can you swing variable length irons?
Finally, there’s no getting around it: When you’ve grown up your entire life swinging variable-length irons, as most golfers have, single-length irons will be an adjustment. The shorter longer irons may look unusual on the eye; you may not be used to choking-down so much on your wedges around the green; the gapping between irons may be tighter than you’re used to. That’s all normal, and it’s something you’ll get used to in time.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
What Is A One Length Iron?
A set of one length irons will have all of the irons in the set manufactured to be the same length as a seven iron. This simple change will impact the way the club performs from a ball flight, workability, and even a distance perspective. The single length irons make it easy for golfers to keep their setup and stance the same on almost any swing.
Best One Length Irons – Reviews
It should come as no surprise that the newest release from Cobra takes over the top spot as the best single length irons on the market. On almost every iron set Cobra releases, they will include a one length option to appeal to players. The new Radspped is 37.5 inches long and comes with matching hybrids and wedges as well.
Buyers Guide: Choosing The Best Single Length Irons
As you can see from our list of the best one length irons in the game of golf, Cobra is quite well known for its presence in this industry. Cobra worked with Bryson Dechambeau to develop the original one length golf clubs that Bryson had already been playing.
Frequently Asked Questions
Now that you have a better idea as to what one length irons you should purchase, it’s a good idea to ask a few questions about these clubs and ensure they are the proper fit for your game.
Conclusion
We hope that you now have a better understanding of the best one length irons on the market. The Cobra Radspeed one length irons stand out as the best overall choice as they are the newest and most advanced technology. The weighting on these clubs is impressive and allows for some of the fastest ball speeds we have seen from the Cobra brand.
What is the best iron for golf?
Most golfers have a preferred iron in the bag and generally, it is the 7-iron. A shaft length of 37-inches throughout the set will inspire confidence when it comes to hitting long irons. Many a teaching pro in the early days would instruct his pupil to swing all clubs like a 7-iron. Characteristics are long irons with consistent distance ...
What is the Cobra golf iron?
Cobra Golf claims this one-length iron set to be the longest, fastest, and most forgiving.
What is a Cobra Forged Set?
The Cobra Forged One Length was the first-ever forged set from Cobra Golf and was inspired by Bryson DeChambeau who was starting to make a name for himself on the PGA Tour. The one setup concept is used as a marketing tool throughout the Cobra Golf range but has its merits and adds simplicity to a difficult game.
How long are Tommy Armour irons?
Tommy Armour, who was one of the leading manufacturers in those days, came out with a set of Tommy Armour EQL irons. All the irons were 37-inches and the length of today’s traditional 7-iron. The woods were all 41,5-inch long which is equivalent to a traditional 5-wood.
How long is John Deere's iron?
His irons are all at a traditional 6-iron length of 37,5-inches. He stands and swings much more upright using a single swing plane.
Who made the Cobra Forged One Length?
The Cobra Forged One Length was the first-ever forged set from Cobra Golf and was inspired by Bryson DeChambeau who was starting to make a name for himself on the PGA Tour.
Is a 7 iron better than a 4 iron?
Whilst it is true to say that hitting a 7-iron more consistently and accurately builds confidence, it also comes with a few drawbacks. Distance always plays a part in improving the golfer’s game, but ingraining the thought process to swing a 4-iron like a 7-iron is difficult even for the better golfer.
How long have one iron golf clubs been around?
An interesting fact about One Iron Golf is that they have been making single length golf clubs for over 20 years. Similar to Cobra, they offer three different product lines that are available in one length. Each are made specifically for different skill levels as seen below.
Who is the only golfer to use single length irons?
However, this isn’t exactly a new idea. The story goes all the way back to Bobby Jones, who apparently used single length irons in 1930 to win the Grand Slam.
How long is a Speedzone iron?
The ONE Length counterpart of the SPEEDZONE irons are designed to 7-iron length (37.50″) through the set to promote one repeatable setup and swing between clubs for more consistency and accuracy.
What is a Cobra golf iron?
Cobra Golf. Cobra Golf offers three different iron sets as single length. They are all based off of a traditional 7i in shaft length. Cobra offers the following iron sets as one length:
What is a pro line golf ball?
The Pro-line series is designed for intermediate skill level golfers and looks to maximize distance and accuracy. The design incorporates features that professional golfers prefer such as lighter weight and stronger loft angles. This creates a more penetrating ball flight.
Why use single length clubs?
The purpose of single length clubs is to make the golf swing easier by keeping your swing on the same plane. When you use same length shaft for all irons, the concerns while addressing the ball are gone. It becomes easier to make consistent swings at the ball.
Why is it important to have consistent swings in golf?
It becomes easier to make consistent swings at the ball. The main purpose of this is to increase repeatability – which we all know is hugely important when it comes to golf. Golf is a game of misses, so if you can manage your misses a bit better by using single length shafts, you’re more likely to score well.
Single-Length vs Traditional Variable-Length Irons: Basic Differences of Clubs
- In a traditional set of irons (now sometimes called "variable-length irons"), shaft lengths increase as golf clubs' loftdecreases. A 5-iron, which has less loft than a 6-iron, will be slightly longer thanthe 6-iron. A 6 iron is longer than a 7-iron, and so forth. As the name suggests, a set of single-length iron and hybrid clubs will all be the sam...
Cons of Single-Length Irons
- While single-length golf clubs can make it easier to improve your consistency, they can also have some drawbacks. Before diving into the cons, we want to warn you: Though we've listed a higher number of potential cons for single-length irons than pros, we think the significance of the pros will outweigh the cons for many golfers.
Who Should Play Single-Length Irons?
- Everyone is different, so it's impossible for us to say with 100% certainty if single-length golf clubs will be right for you. With that in mind, here are some categories of golfers who could benefit from single length irons and hybrids over variable-length clubs: 1. New Golfers - Beginners to the game of golf are perhaps the most ideal candidates for single-length iron sets. Focusing only on one s…