Full Answer
How to bypass the governor on a Yamaha golf cart?
This is an easy way to bypass the golf cart governor and is supported by new model Yamaha golf carts that have a different setup from the G1 cart. This process involves removing the threaded rod and 10mm nut from the governor. Disconnect the throttle cable that is present in front of the governor arm.
How do you adjust the governor on a Yamaha G29?
Yamaha G29 Governor Adjustment 1 Remove the rear inspection panel from the golf cart. The spring accelerated governor is right below this panel. 2 Use a 10mm wrench and tighten the nut a little by moving it in to expose the threaded rod a little more. ... 3 Take the cart for a test drive to check for the desired speed.
How do you adjust the governor on a 2 cycle golf cart?
In some cases, the adjustment can be done by turning the cable nut that connects the cable to the throttle lever in the counter-clockwise direction. This type of governor is often found in 2-cycle golf carts.
How do you bypass the throttle cable on a golf cart?
The throttle cable coming from the gas pedal generates a response to the spring-loaded linkage. This linkage is counteracted by the governor in the golf cart. If you want to bypass the governor, disconnect and reconnect the throttle cable once again without the intervening linkage.
How to adjust a Yamaha golf cart?
How to increase carburetor speed?
How to increase the speed of a cart?
About this website
How do you bypass the governor on a Yamaha golf cart?
General InstructionsDetach the cable from the carburetor. The cable is about the width of a straw. ... Follow the disconnected cable up to the governor. ... Disconnect the gas pedal cable from the governor and reroute it to the carburetor. ... Using your wrench, remove the bolt on the gas pedal shaft.
How do you adjust the governor on a Yamaha g16 golf cart?
0:441:20Speed adjustment for Yamaha gas Golf Carts - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt just slow it down screw it in to speed it up.MoreIt just slow it down screw it in to speed it up.
How can I make my g16 faster?
0:261:37How to make your Yamaha Gas Golf Cart go faster. 2007-2018 - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo your governors is right in the back. You markedly get a little faster you can tighten this justMoreSo your governors is right in the back. You markedly get a little faster you can tighten this just not if the closer you go this way it'll make it go faster. And anything loosen to not.
How can I make my Yamaha gas golf cart go faster?
0:005:15Yamaha G29 Drive Golf Cart Governor Adjustment - MORE SPEED!!YouTubeStart of suggested clipEnd of suggested clipItself by tightening this nut down you're putting more pressure on the spring. So that the governorMoreItself by tightening this nut down you're putting more pressure on the spring. So that the governor has to work harder to pull back on the throttle.
How fast does a Yamaha g16 golf cart go?
Most electric golf carts are faster than gasoline golf carts. Although, new gasoline and electric golf cart versions of Yamaha all have the same top speed. The top speed of both versions of Yamaha golf carts is 19 mph (31 kph).
How does a Yamaha golf cart governor work?
How Does a Golf Cart Governor Work? A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.
How can I make my golf cart Governor faster?
Steps to Adjust EZ-GO Golf Cart GovernorStep 1 - First, lift the seat of your engine to reveal seat cousins. ... Step 2 - Remove the seat cushions over your motor. ... Step 3 - Remove the black plastic cover to expose the motor. ... Step 4 - Loosen the smaller one and tighten the larger one to increase your cart's speed.More items...•
How do you bypass a speed sensor on a golf cart?
The speed sensor on the EZGO golf cart can be bypassed by unplugging it from the speed controller. By disconnecting the J5 pin on the speed controller, this will cause the golf cart to creep along as the controller will go into limp mode.
Why is my Yamaha golf cart Slow?
Why does My Yamaha Golf Cart Run Slow? The main reason why a Yamaha golf cart runs slow is because of low battery charge, dirty battery terminals, or a loose spark plug. A Yamaha golf carts slow speed can be traced to other reasons as well: A battery with a low charge.
How fast can a golf cart go without a governor?
What is the Average Golf Cart Speed? The average top speed of a typical golf cart without any upgrades is between 12 and 14 miles per hour. Without any sort of modification or upgrade on a golf cart, the top speed that you will be getting on a golf cart is about 14mph.
Why is my gas golf cart running slow?
Low Battery Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.
How do you adjust the throttle on a gas golf cart?
Pull the spring that is present around the plastic piece located behind the shifter. Spin it until it falls back. Loosen the throttle cable present in the cable box to adjust the extent to which you can take it out of the housing. Press the accelerator so that the golf cart starts up and begins to idle.
Where is the governor on a Yamaha golf cart?
1:012:57Yamaha G29/DRIVE Governor Speed Increase | ASK DAVE | Golf Cart ...YouTubeStart of suggested clipEnd of suggested clipAnd locating the governor under the service panel in the rear above the engine. For reference it'sMoreAnd locating the governor under the service panel in the rear above the engine. For reference it's just opposite the driven clutch at the rear of the engine.
How do you adjust the governor on a golf cart?
Adjusting an EZ-GO Golf Cart GovernorStep 1 - First, lift the seat of your engine to reveal seat cousins. ... Step 2 - Remove the seat cushions over your motor. ... Step 3 - Remove the black plastic cover to expose the motor. ... Step 4 - Loosen the smaller one and tighten the larger one to increase your cart's speed.More items...•
Can you make a Yamaha electric golf cart faster?
Simply put, most types of golf carts are designed to work with a range of different batteries. A new battery will increase a golf cart's motor output. The result of the motor output increase is higher speed. Purchasing new batteries with a higher voltage maximum will increase your golf cart's speed dramatically.
How do you adjust the governor on a Yamaha 2021 golf cart?
1:294:32Yamaha Drive 2 Quietech Governor Adjustment - GET MORE SPEEDYouTubeStart of suggested clipEnd of suggested clipLeft from where the bottom of the nut is at so to do that i like to use a ratcheting wrench that youMoreLeft from where the bottom of the nut is at so to do that i like to use a ratcheting wrench that you can just put right on the end of that nut. And then just start tightening. It.
How to Adjust the Governor on a Yamaha Golf Cart - SportsRec
Different types of Yamaha golf cart models have different types of governors, which regulate the top speed of the golf cart over flat terrain. The three types of governors in Yamaha models include spring adjustment, clutch cable, and spark regulation governors. Each of these models has different procedures for proper ...
How to Adjust Governor on Yamaha G29 Drive Gas Golf Cart - YouTube
Barry, at DIY Golf Cart, shows you how to properly adjust the governor on a Yamaha G29 Drive gas golf cart. Most golf carts are limited in their speed from t...
How Do I Adjust The Governor On My Club Car - Cartaholics Golf Cart Forum
How do I adjust the governor on my 1994 club car golf cart? Or what can i do to make run faster? It's really slow now. thanks
Yamaha G1 Golf Cart Diagram for Governor
I'm working on a 82 Yamaha G1 golf cart. I want to reconnect the governor but I'm not sure if it's even all here. Does anybody have a picture or diagram of...
How to remove governor from golf cart?
How to Remove the Governor From a Golf Cart. You hit the links. The course is open in front of you as far as the eye can see. The only thing holding you back is the put-put-puttering of your golf cart. Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you've got a few minutes, some simple mechanical know-how and a wrench, ...
Where is the governor on a car?
The governor generally sits on top of the engine . This is the easiest way to find the carburetor. Once you've followed the cable up to the governor, disconnect it there as well. You can save this cable for later use or throw it away.
How fast can a golf cart go?
Golf carts are governed to go anywhere from 12 to 14 miles per hour. But if you've got a few minutes, some simple mechanical know-how and a wrench, you can double the speed of your cart and zip through your round.
How to adjust a gas pedal on a cart?
Using your wrench, remove the bolt on the gas pedal shaft. Slide the shaft up so there is more play in the gas pedal. Tighten the bolt and then start the cart. You may need to adjust the gas pedal shaft a couple of times before you have it to your liking.
What are the governors on a Yamaha golf cart?
The three types of governors in Yamaha models include spring adjustment, clutch cable, and spark regulation governors.
How to make a golf cart go faster?
To make a golf cart go faster, you can also consider installing a new engine. Always consult the owner's manual for the Yamaha golf cart model you have. Every model has limits to how fast it can physically go without engine damage or failure resulting. To make a golf cart go faster, you can also consider installing a new engine.
How to adjust a Yamaha golf cart?
How Do You Adjust the Governor on a Yamaha Golf Cart? Adjusting the governor on a Yamaha golf cart begins with detaching a spring adjustment cable from the carburetor. Use a screwdriver to turn the bolts holding the governor clockwise to increase the speed. Run the cable on the gas pedal to the carburetor and reattach it at the original position ...
How to increase carburetor speed?
Use a screwdriver to turn the bolts holding the governor c lockwise to increase the speed. Run the cable on the gas pedal to the carburetor and reattach it at the original position of the governor cable. Adjust the gas pedal according to your needs. Start by locating and detaching the carburetor from the governor.
How to increase the speed of a cart?
Turn the nut anti-clockwise to elongate the cable, thus increasing the speed of the cart. You can reduce your vehicle's speed by turning the nut clockwise. Adjust the length of the gas pedal by removing the bolt on its shaft. After the adjustment, refasten the bolt and press the pedal. Make adjustments according to your speed needs.
How to adjust a Yamaha golf cart?
How Do You Adjust the Governor on a Yamaha Golf Cart? Adjusting the governor on a Yamaha golf cart begins with detaching a spring adjustment cable from the carburetor. Use a screwdriver to turn the bolts holding the governor clockwise to increase the speed. Run the cable on the gas pedal to the carburetor and reattach it at the original position ...
How to increase carburetor speed?
Use a screwdriver to turn the bolts holding the governor c lockwise to increase the speed. Run the cable on the gas pedal to the carburetor and reattach it at the original position of the governor cable. Adjust the gas pedal according to your needs. Start by locating and detaching the carburetor from the governor.
How to increase the speed of a cart?
Turn the nut anti-clockwise to elongate the cable, thus increasing the speed of the cart. You can reduce your vehicle's speed by turning the nut clockwise. Adjust the length of the gas pedal by removing the bolt on its shaft. After the adjustment, refasten the bolt and press the pedal. Make adjustments according to your speed needs.