How to care for your golf club?
- Inspecting throughout the whole year. As we have mentioned earlier that one should inspect his/her golf club throughout the whole year. ...
- Keeping it moisture-free. After every game, if you are playing outside, there is a high chance that the shaft of the golf club will gather moisture on it.
- Storing in a proper way. ...
- Final words. ...
How to choose the right shaft for your golf club?
For instance, ball impact that is 0.5 inches off-centre equates to a 7% loss of carry distance, and an impact that is 1 inch off-centre equates to a 14% loss of carry distance. So, the key to choosing the right shaft is finding the correct length that provides a repeating, solid hit each time. – How to measure the length of a golf club shaft?
How to repair&replace a golf club shaft?
How to Repair & Replace a Golf Club Shaft. 1 Step 1. Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
Do I need a graphite or steel shaft for my golf swing speed?
Since they don’t get as much distance as graphite shafts, steel shafts require faster swing speed to make up for the loss of distance compared to graphite. We’d recommend a steel shaft for golfers who have normal swing speed (90 to 110 mph) but want some extra control on their shots.
How does shaft stiffness affect your golf clubs?
When the length of your golf club is adjusted to better suit your arm length and height, its shaft stiffness is bound to get affected as well. More specifically, when the current shaft length is shortened, the level of ‘stiffness’ of this shaft increases.
How do I protect my golf club shafts?
Never put your golf clubs away when wet Be wary of storing your golf clubs when wet. Wet golf clubs tend to promote the growth of rust on the shaft of your clubs. To prevent this from happening, always remember to dry them off before storing them away for safekeeping.
How often should golf club shafts be replaced?
Again, you'll want to invest in irons with steel shafts rather than graphite shafts. A good rule of thumb to follow is if you're a golfer with a low handicap or just a casual golfer is to replace your golf irons somewhere around every four to five years or after around three hundred rounds.
Do golf shafts wear out over time?
So yes, golf clubs do eventually start to wear out and will need replaced. For the average golfer this will take some time but you need to just be aware of what can go wrong if you don't replace your clubs often enough.
How do I stop my golf shaft from rusting?
To prevent rust from happening again, you should make sure your golf club shafts always stay dry. People think about cleaning club heads and grips, but they don't pay much attention to the shafts. If water sits on the shaft, it will eventually start to rust it.
Are 20 year old golf irons still good?
There is no evidence that golf clubs deteriorate over time. Well maintained clubs will last a lifetime. 10+ year old clubs should be checked for better options but clubs less than 5 years old do not need replacing except for wear and tear issues to which wedges and forged irons are most vulnerable.
How much does it cost to Reshaft a golf club?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.
Do golf clubs lose their pop?
A golf driver can go dead and lose its pop when there is a crack, or defect, in the club face. This can be caused by faulty manufacturing or weakness in the driver head, and affects distance and performance.
How often should you sharpen the grooves on your golf clubs?
A decent rule of thumb though would be to re-groove every 15 - 20 rounds of golf. You'll need to experiment to determine what frequency is best for you. How many passes with the groove sharpener across each groove should I make? Again, a decent rule of thumb is that you should make 5 - 10 passes on each groove.
How much distance do you lose with old golf balls?
When a golf ball is on its way out, you can lose 5-25 yards depending on the damage.
Can you use wd40 on golf clubs?
You can use WD-40 on golf clubs. It can be an effective way to remove rust and dirt from the head and shaft. It can also be used to remove the grip, acting as a solvent when you are applying a new one. Learning how to keep your golf clubs clean is vital.
Should you polish golf clubs?
Keeping your clubs clean will keep them playable for years. Polishing your golf clubs should be a standard part of your golf club maintenance routine. Polishing golf clubs not only improves the cosmetic appearance of golf clubs, but it also protects the clubs against environmental factors such as dirt and water.
Does WD-40 Remove rust?
Rust Removal Solution for Tools & Rust Remover Soak | WD-40. WD-40 Specialist® Rust Remover Soak quickly dissolves rust and restores tools, equipment, and surfaces to bare metal without chipping, scraping or scrubbing.
How to determine golf shaft flex?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
What is a multi-material shaft?
A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.
How long should a 5-iron shaft be?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How much does graphite shaft weigh?
Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.
What is the difference between steel shafts and graphite shafts?
Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.
What is the first thing to decide on golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...
What is the kick point of a golf shot?
The shaft kick-point – also known as flex-point – is the point where the shaft bends and affects the trajectory of the shot. Although the effect is only small, it is still measurable.
What is flex in golf clubs?
Put simply, the flex determines a golf club shaft’s ability to bend during a swing, affecting the distance and direction. Therefore, getting the right flex in your golf clubs is important.
Cleaning your golf clubs
Having clean clubs doesn’t just make them look shiny and brand new; it also helps them continue to perform at their full potential.
Storing your clubs
Whether it’s between rounds or the end of your golf season, storing your clubs is extremely important.
General upkeep
Outside of cleaning and general storage procedures, your clubs are going to naturally age. There’s going to be one bad swing after a couple dozen rounds and something may come loose.
Why is shaft length important in golf?
An increased shaft length creates a greater swing-arc, which relates to more distance. Shorter stature golfers often increase the length of the shafts and stand further away from the ball. The longer the shaft the less control and this is where fitment assists.
What is carbon fiber shaft?
Modern composite graphite shafts have 3 layers of fiber winding, adding substantial rigidity and performance. Carbon fiber offers increased flex, greater clubhead speed, but reduced accuracy, due to more torque. It also dissipates the stinging shock from a poorly struck shot and will protect the hands and wrist.
What is flex in golf?
Flex. Put very simply, flex is the amount of bend in the shaft. It affects launch angle, spin, ball flight, control, carries, and distance. Shafts are qualified in different ways but reference to flex is the most important. Powerful swings require stiffer shafts which put less load on the shaft.
What weight shafts are available for clubfitters?
Clubfitters now have the option to fit these shafts with weights from 95 to 110gm. This is a reduction from the 115 to 125gm range previously on offer. Steel generally has less flex, more stability, low torque, and provides more accuracy. Standard steel shafts are shorter.
What happens if you don't have a stiff shaft?
The result is a loss of distance. Added to this the direction control will be lost.
When did steel shafts become legal?
Finally in 1924 steel shafts were legalized and Billy Burke was the 1st to win the US Open with steel. From 1960 to 1970 the aluminum shaft was introduced but besides expensive, it broke very easily. Then followed graphite shafts, displayed at the 1970 PGA merchandise show for the first time.
What woods were used in the mid 1800s?
Ironheart, bloomahoo, bullet wood, and ash and lancewood were some of the choices. Then in the mid-1800s hickory shafts became the rage, and they were whippy, light, and resilient. The downside of hickory was that each club had to be swung differently which ultimately led to inconsistency.
How to remove a broken shaft from a vise?
Step 1. Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets ...
Can you replace a golf club shaft?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced. Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
Why do golf clubs have alignment marks?
Additionally, grips may contain small markings, known as alignment marks, to help clubfitters place the grips correctly, so the ridges or flat spots will be in the correct positions when golfers grasp the clubs.
How to make a golf club a grip?
Step 1. Place a rubber shaft clamp around club’s shaft, a few inches below the grip. Set the clamp into a vise, then tighten the vise. The clubhead must be square relative to the vise, basically perpendicular to the ground.
What is a golf grip?
For example, the grip is a curved surface, but it’s not uniformly curved. With rare exceptions, a golf grip will contain some ridges or flatter spaces that help golfers hold the club correctly.
Where is the alignment mark on a grip?
Different grips contain different alignment marks, but almost all grips have a small notch at the top of the grip and another at the bottom of the grip. Sometimes the logo or company name that runs vertically down the grip also serves as the alignment mark.
Where should the rib be on a golf shaft?
But if you're placing a ribbed grip on the shaft, the rib should be on the bottom. “The rib sits at 6 o’clock," according to DeWulf. "If it’s at 5 or 7 when you grab it, it can adjust the face angle if you’re not careful.”.
