The following are the steps involved in adjusting a Callaway driver: 1) Loosen the screw on the face of the golf club with an Allen Key until it is flush with its head. 2) Tighten or loosen 3-5 notches on the back of the grip until it feels comfortable in your hand and then tighten up screws at least one notch.
Can you adjust the Callaway Razr fit driver?
You can adjust the Callaway RAZR Fit driver using the Opti Fit Hosel. The adjustable hosels allows for the face angle and loft to be changed to suit your swing. Back in 2009, the world of golf and its drivers would change forever. TaylorMade’s R9 adjustable driver had just been introduced and took off.
How to replace a Callaway graphite golf shaft?
How to Replace a Callaway Graphite Golf Shaft. 1 Step 1. Remove your old shaft. If your club is an older model, it might contain a screw that helps the epoxy keep the shaft and the club head together. 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.
How do I make an appointment with Callaway Golf?
You may also make arrangements directly through Callaway Golf by calling our Customer Service Department at (800) 588-9836. Our business hours are Monday through Friday, 6:00am to 5:00pm Pacific Standard Time.
How do I get a replacement headcover for my Callaway Golf Club?
A: Callaway Golf will be happy to provide you with a replacement headcover for any of our current products. We ask that you please e-mail or call our Customer Service Department at (800) 588-9836 and provide your street address as well as which club model you have.
How does Callaway distance fitting work?
The Callaway Distance Fitting program enables golfers to sign up for a free 30-minute fitting conversation with one of its custom fitters. Other companies, most notably Ping and Bridgestone, are attempting to get golfers better dialed in without them having to be physically present.
How long does a club fitting take?
In terms of what to expect, Grabowy said that fitting a player for a full set of clubs will take about two and a half hours and include "educating" a player about his or her needs. The fitting process also remains pretty much the same for woods, irons and wedges.
How much does it cost to get fitted by Callaway?
The session cost is $150, a portion of which can be credited toward a club purchase (more on this later). Callaway recommended wearing comfortable golf attire and bringing my driver and 6-iron, which are the two clubs they use to fit a set.
Can you fit clubs you already bought?
And the answer is absolutely yes, it's worth getting fit for clubs you already have. Especially if you're 5-foot-5, since a stock set of clubs isn't likely to have the proper lie angle for you. Luckily, if that's the case, it's not a difficult fix.
Should I wear golf shoes to club fitting?
Q: What should I wear? A: During a custom fitting session, you'll be swinging golf clubs, so you'll definitely want to dress comfortably. Don't wear anything that it's difficult to move or swing a golf club in and feel free to bring your golf shoes if you have them. Otherwise just come as you are!
How much does a full golf fitting cost?
On average it costs between $250 and $600 to get a full bag of golf clubs fitted. Driver only fittings typically cost from $50 to $175 as do 'irons' fittings. Wood/Hybrid and wedge custom fittings can be cheaper at $40 to $150 but golf club fitters will often 'refund' fitting costs if you buy clubs afterwards.
What can I expect at a Callaway club fitting?
Custom Fitting is one of the most important aspects of improving your game. At our Fitting Locations, a club fitter will work with you to find everything from the right head models, lofts, flex, shafts and weights for you. You'll leave the fitting feeling confident with equipment that's customized to your game.
Does 1 degree lie angle make difference?
Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.
Does shortening a golf club change the lie angle?
If you lengthen or shorten your clubs, the lie angle will also change. It's important that your clubs lay flat on the ground (the toe or heel isn't off the ground). This is something you might need to get adjusted.
Should high handicappers get fitted clubs?
Custom fitted golf clubs can benefit every standard of golfer and particularly high handicappers. High handicappers are very inconsistent ball strikers and fitted clubs both increase the chances of hitting the ball out of the centre of the clubface and maximizing how far and straight mishits go.
Is a club fitting worth it?
Is it worth getting custom fit golf clubs? The simple answer is yes, it's definitely worth getting custom fit golf clubs. If you were to look at the back of a typical set of off the shelf clubs, they would usually have various markings on them as well as loft and lie angles.
How do you resize a golf club?
When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.Use a utility knife to cut the side of the existing grip.More items...
How long does a driver fitting take?
A thorough driver fitting session should last around an hour, and typically takes at least 60 balls to dial in the right head and shaft combo. That's a lot of physical and mental stress packed into an hour, and it's more stress for golfers who decide to get fit for other clubs on the same day.
How long does it take to get fitted?
Most alterations appointments take between 5 and 10 minutes. By "most" we mean "simple" alterations like pant hems and other simple changes. Other alterations, like tailoring a suit or dress, or more complex changes, require about 10 to 20 minutes in order to obtain the best fit possible.
What happens during club fitting?
In short, club fitting is the process of determining which golf club allows a player to: Consistently strike a ball closest to the center of the face, with. Clubface that squares to the target line with the sole of the club flush to the ground, that. Optimizes a player's performance, feel and consistency, while.
Is a club fitting worth it?
Is it worth getting custom fit golf clubs? The simple answer is yes, it's definitely worth getting custom fit golf clubs. If you were to look at the back of a typical set of off the shelf clubs, they would usually have various markings on them as well as loft and lie angles.
When to change clubface to closed position?
You may change the clubface state to a closed position when approaching the ball if it doesn’t seem right. Then, set the dial in the closed option (C).
What are the three positions that golfers can change their clubface to?
Golfers may directly change the clubface to three different approach positions: closed, open, and square.
What Are The Technologies Used In A Callaway RAZR?
The easy adjustment feature of this RAZR Fit will only work if the remaining parts of the club’s design are of superb quality and accuracy. Here are some other outstanding technologies included in the driver.
What is Callaway Razr?
Callaway RAZR allows golfers to modify their clubface and weight. Let’s see how it works.
What is MOI in golf?
The MOI is a unit of measure that shows how resistant a clubhead is to bending. The larger the MOI is, the more forgiving the golf club can be when golfers strike the ball.
Why does the grip reminder stay the same?
Because the cog doesn’t displace the shaft, the grip reminder and graphics remain the same, especially when you adjust the club’s face angle.
What does cutting edge technology do to golf clubs?
This cutting-edge technology also improves stress absorption and, as a result, ball velocity from across the clubface.
How to return irons to Callaway Golf?
You can return your irons to Callaway to be adjusted through any of our authorized retailers. You may also make arrangements directly through Callaway Golf by calling our Customer Service Department at (800) 588-9836 . Our business hours are Monday through Friday, 6:00am to 5:00pm Pacific Standard Time.
What is Callaway Golf?
A: As an industry leader , Callaway Golf is committed to offering the most technologically advanced and innovative new products available to consumers. To meet this commitment, Callaway Golf employs a talented team of engineers, designers and scientists who are responsible for designing and developing new golf products for Callaway Golf. To ensure our commitment to consumers and to avoid conflicts in designing and developing these innovative new products, Callaway Golf has adopted a policy of refusing idea submissions from individuals not employed by Callaway Golf.
Can Callaway accept ideas?
Therefore, while we thank you for thinking of Callaway Golf Company concerning submission of your idea, we are unable to accept your idea submission. We wish you the best of luck in your endeavors.
Does Callaway Golf pay for ideas?
In addition, Callaway Golf does not pay for ideas or intellectual property rights from non-employees or non-consultants unless a separate written agreement is entered into and signed by the Chief Executive Officer of the Company. Unsolicited ideas disclosed to the Company are not treated as confidential nor do we assume any responsibility for guarding your idea against any loss of right, or claim of title.
How to get distance fitting?
Step 1: Choose an open appointment time that is convenient for you. Step 2: Fill out an online form to tell us about your current game. Step 3: Complete your appointment and receive a confirmation. Step 4: The Distance Fitting representative will call you at your appointment time.
Can you get distance fittings from home?
With Distance Fitting, you can experience a FREE, personalized custom fitting from home. Schedule your phone call, and our Certified Master Fitters will find the perfect equipment for your game. Only available in the United States and Canada.
How To Adjust A Callaway RAZR Fit Driver?
When the Callaway RAZR Fit Driver was introduced in 2012, it took the golfing world by storm. Amateurs and professionals alike used it to increase their driving results.
What is Callaway's composite crown?
Callaway used a forged composite in the crown that is lighter and stronger than titanium. The composite contains over 7 million turbostratic carbon fibers. It allowed the engineers to precisely control the thickness of the crown and resulted in an optimal center of gravity and a very high MOI (moment of inertia).
How To Adjust The RAZR Fit’s Club Face?
The RAZR Fit is made with Callaway’s acclaimed OptiFit adjustability system that allows for changing the ball’s trajectory with each different setting, and is easy to use. The system allows golfers to manually adjust the club’s face angle to three address positions:
How are setting adjustments controlled?
The setting adjustments are controlled via a cog – this is a rotating section of the hosel that alters the angle of the shaft axis in relation to the head.
What is Callaway's slogan?
Callaway’s slogan “Change your driver, not your swing “was the perfect way to promote the RAZR Fit driver.
Why do you rotate the cog?
Rotating the cog will give you the chance to see what your preferred address is when hitting the ball.
What does "s" mean in golf?
Setting the club on the square position (S) will keep it in the neutral squared-faced position.
How to save money on Callaway golf club?
Save money by replacing a graphite shaft on a Callaway club at home. From time to time, and for whatever reason, you might need to replace a graphite shaft on a Callaway club. You always can spend the money by having it done at your local pro shop or sporting goods store, or you can save money by doing it yourself.
How long does it take for a golf grip to dry?
Slide the grip onto the shaft until it is as far as it will go. Then make your final tweaks to your grip while it dries, usually in about 10 to 15 minutes.
How to separate shaft from club head?
The first is to heat the hosel, or connector, of the club head with a blow torch until the epoxy liquefies. Always wear protective glasses when using a blow torch. Then ream out residue from the hosel with a wire-drill bit. The second way is to saw off the shaft at the hosel.
