How do you put new cam gears on?
Take the cam gear off carefully and put new cam gear (s) on, making sure the teeth or the belt don’t move, the cam gear is keyed and can only go on one way, your marks should line up, if not make sure they do! (If your not VVTi do the other side too, but make sure you do one side at a time)
How do you adjust camber on a Yamaha G9 golf cart?
You can have a positive camber (which is actually not harmful for a golf cart) by getting a lift along with bigger tires. New king pins and bushings also help to get a bit of positive camber. Yamaha G9 camber adjustment Worn out or incorrect struts are a key cause of camber problems in a Yamaha G9 golf cart.
Why do golf carts need camber adjustments?
The golf cart’s wheels get wearied away over time due to regular rides over rough terrain, potholes and other uneven ground, to fix which, camber needs to be adjusted.
How do you fix high camber on a golf cart?
Highly displaced camber: This normally happens if your cart is too old and the control arm bushings of your spindle lift kit are heavily worn out. The best bet is to replace the bushings with new ones or simply switch to 6” double A arm lift kit. You can also adjust the toe to fix camber problems that might arise.
How to change the speed of a golf cart?
Locate the spring on the differential or carburetor that helps in changing the cart speed by adjusting its tension. Increase the length of the cable that is fitted on to the body of the throttle and clutch of the two-stroke engine.
Where is the governor arm on a golf cart?
Locate the governor arm of the golf cart. This is mounted above the rear axle housing and under the cart. Depending on the cart model, there may be a protection plate above the governor.
How to start a golf cart with a gas pedal?
Locate the gas pedal that is fitted to the governor and remove the connection. Re-route the gas pedal to the carburetor. Remove the bolt present on the shaft of the gas pedal. Slide the shaft upwards so that the gas pedal has more play. Tighten the bolt and start the golf cart.
How fast is an EZGO golf cart?
The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph.
What is a golf cart governor?
A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.
How to ride a golf cart at full speed?
Ride the cart at full speed over a course of known length. This will ensure that the governor controls the speed of the cart within factory specifications. Fasten the black plastic cover and put the seat back in place. Take care when tightening the nut. The more you tighten, the faster your cart will go.
Can you remove a golf cart governor?
It doesn’t take much time or skill to remove a golf cart governor. With some basic mechanical expertise and general-purpose tools, you can do this yourself. The process is more or less the same in all golf carts.
