What is a VW combi valve?
The combination valve, or combi valve as it's called at times, is a pneumatically actuated shut-off valve that is integrated into the valve housing and allows the SAI pump to add air to the exhaust gasses during start up and open loop to help with emission control.
How do you test a combi valve?
1:228:42How To Test EGR Valves | Old vs New - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing. It's a little tough to see the the EGR valve it's underneath the airbox.MoreUsing. It's a little tough to see the the EGR valve it's underneath the airbox.
What does combi valve do?
A combination valve is exactly what it sounds like – a valve that combines the function of multiple other valves. It's a way to simplify and streamline unvented cylinder operation and to make maintenance and repairs easier. A combination valve usually includes four different types of valves.
What is a secondary air injection check valve?
An ACDelco GM Original Equipment Secondary Air Injection Check Valve prevents exhaust gases from flowing back through the air injection system, and is a GM-recommended replacement for your vehicle's original component.
How do I know if my EGR valve is stuck open?
Open Position: Rough idling and problems with acceleration are the two most common indicators that the EGR valve is stuck open. The truck might also stall excessively. When the EGR valve is stuck open, all of the exhaust gas cycle back into the chamber, meaning there's not enough oxygen for a combustion to take place.
How do I know if my EGR valve is working?
EGR valve symptoms can vary, however, the most common symptoms of a faulty EGR valve are explored below:Your engine has a rough idle. ... Your car has poor performance. ... You have increased fuel consumption. ... Your car frequently stalls when idling. ... You can smell fuel. ... Your engine management light stays on.More items...•
How do you change a combination valve?
1:202:28How to Replace the Brake Proportioning Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut a piece of clear plastic tubing. Over the brake bleeder screw. And place the other end in aMorePut a piece of clear plastic tubing. Over the brake bleeder screw. And place the other end in a container with two to three inches of brake fluid. Get your assistant to pump and hold the brake pedal.
How do you install a combination valve?
0:241:49How to Install a Proportioning Valve to a Master Cylinder - YouTubeYouTubeStart of suggested clipEnd of suggested clipLine up so you can mount the proportioning valve right on the master cylinder assembly when you goMoreLine up so you can mount the proportioning valve right on the master cylinder assembly when you go to install it you don't have to run separate set of lines.
What causes EGR valve failure?
The failures are usually caused by a build-up of deposits in the EGR valve over a period of time that causes them to stick. This build-up is part of the ordinary operation of the vehicle and should be regarded as a serviceable item requiring repair or replacement.
How do you know if your air pump valve is bad?
What are the Symptoms of a Bad Air Pump Check Valve?Illuminated Check Engine Light.Increased Tailpipe Emissions.Damage to Other Parts of the AIR System.
What happens when check valve fails?
Symptoms of a Failing Check Valve For example, failing check valves will start to vibrate and even lose some internal parts when problems begin to arise. Other symptoms of check valve failure include reverse flow and excessive component wear and damage. Check valves will also emit noises as they start to break down.
Can you drive without secondary air pump?
Technically speaking, you can drive without a secondary injection pump. However, doing so is not advised. What is this? This stems from the fact that a faulty secondary injection pump can cause a host of drivability-related issues, most of which can vary significantly in severity, on a case-by-case basis.
How do you fix a brake proportioning valve?
1:202:28How to Replace the Brake Proportioning Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut a piece of clear plastic tubing. Over the brake bleeder screw. And place the other end in aMorePut a piece of clear plastic tubing. Over the brake bleeder screw. And place the other end in a container with two to three inches of brake fluid. Get your assistant to pump and hold the brake pedal.
Where is the combination valve located?
0:011:08Combination Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipA combination valve is a multi-purpose hydraulic control found in most vehicles equipped with frontMoreA combination valve is a multi-purpose hydraulic control found in most vehicles equipped with front disc and rear drum brakes. The valve is typically located on the left side of the vehicle.
What are metering valves?
Metering valves are multi-turn valves designed to regulate the flow of fluid. These valves generally have low flow rates and high pressure differentials. Metering valve distributors are hydraulic resistors.
Keep in mind
In modern cars that employ combination valves, replacing the entire valve body is necessary if the proportioning valve fails.
Our recommendation
Follow your automaker’s recommendations on brake system service to ensure that the fluid remains in good condition and free of debris. Have your braking system maintained by our expert mechanics to ensure that any potential problems are caught as soon as possible. Driving with a failing proportioning valve puts you at increased risk.
How important is this service?
While it is still possible to drive with a failed or failing proportioning valve, it’s not recommended because it decreases your safety while increasing the risk of being involved in an accident because your rear brakes lock up under even light loads. Have the entire combination valve assembly replaced immediately.
How can we help?
Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.
