What is the gear ratio of a Yamaha golf cart?
This section contains various performance gear sets for a variety of golf cart makes and models including EZGO, Club Car and Yamaha. For some models, they are available with a 15:1 gear ratio (provides low end torque), 8:1 (medium speed) and 6:1 (high speed).
What are the different types of performance gears for golf carts?
This section contains various performance gear sets for a variety of golf cart makes and models including EZGO, Club Car and Yamaha. For some models, they are available with a 15:1 gear ratio (provides low end torque), 8:1 (medium speed) and 6:1 (high speed). Performance gears have been around forever in many different applications, like racing.
How do you adjust a shift cable on a golf cart?
A golf cart shift cable adjustment is 1 3/8-inch from the washer and is to be made till the end of the threads. The adjuster has to be in the neutral position while making this change in the cable’s position.
How do I choose the right gears for my golf car?
Be sure to select the proper gears for your intended application, taking into consideration the terrain. Most golf cars have a factory installed gear set (gas and electric) of about 12.5:1 ratio (the motor turns 12.5 times for each rotation of the drive wheel).
Why wont my golf cart go forward or reverse?
The problem could be with either the Run/Tow switch or Forward/Reverse switch or both. Check the switches to ensure that they aren't stuck midway. If they are, getting them released should help. However, if they show signs of wear and tear, you must get them replaced.
How do you make a golf cart go forward?
0:5911:38Golf Cart Forward Reverse Switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipMost likely that your forward reverse switch. Which is located right there. This is what makes yourMoreMost likely that your forward reverse switch. Which is located right there. This is what makes your golf cart go forward or reverse.
Do golf carts have gears?
Most golf cars have a factory installed gear set (gas and electric) of about 12.5:1 ratio(the motor turns 12.5 times for each rotation of the drive wheel).
How do you change the speed on a EZGO golf cart?
Tighten the governor spring located in the engine of most golf carts to adjust your cart's top speed. 90% of EZ Go Carts have simple springs which limit the speed of the engine. To raise the top speed of your golf cart, all you need to do is locate this spring and tighten it slightly.
Where is the reverse switch on a golf cart?
If the golf cart starts beeping the minute you turn the key to the right, it's in reverse. To switch between forward and reverse, you need to locate the switch which is generally down the front side of the seat between the driver's and the passenger's lower legs.
How does a forward reverse switch work on golf cart?
0:379:43Golf Cart Forward and Reverse Switch Direction Selector Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat is brand new it simply cables connect to the bright copper colored contacts. And the switchMoreThat is brand new it simply cables connect to the bright copper colored contacts. And the switch rotates through a hand action and that changes the polarity.
How does a golf cart transmission work?
1:143:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.
How do I change the speed on my club car?
1:1811:46Club Car precedent speed code 5 - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay it says programming is very easy. And it should take about 45 seconds first decide which speedMoreOkay it says programming is very easy. And it should take about 45 seconds first decide which speed you want to use.
Why is my golf cart so slow?
Low Battery Usually, the most common reason golf carts slow down is when they don't get enough power output from the battery. If the battery pack charge is very low and your cart is out of power, your cart will run slow.
Where is the speed controller on an ezgo golf cart?
These speed controllers are located under the EZGO cart seat. Check the speed controller's attachment near the carburetor.
Can you adjust the speed on an electric golf cart?
Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.
Why is my ezgo golf cart so slow?
A EZGO RXV and TXT golf cart can run slow because of a faulty speed sensor, low battery charge and insufficient levels of water in the battery. A problem with the speed sensor. A faulty speed magnet. One or more batteries could are weak and don't have sufficient charge or the water level could be low.
How does a golf cart transmission work?
1:143:28How a golf cart CVT slip drive clutch works - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutchMoreAnd the rear drive clutch actually separates it widens causing the belt to drop down into the clutch.
How do you remove the speed limiter on a electric golf cart?
Basically, an electric speed governor can be controlled by a tiny metal rod that's located by the clutch of your golf cart. First things first: The electric speed governor is connected to a cable. You can adjust your speed by rotating the nut in a counterclockwise rotation.
Does a gas golf cart have a transmission?
All golf carts (much like cars) have a clutch, which is the part of the drivetrain that helps the put the power of the motor down through to the wheels/ground. Golf cart clutches are a part of the Continuously Variable Transmission (or CVT).
How do you test a EZ GO switch?
Check all the connections and make sure each part is getting power by using the multimeter. Have your foot firmly on the brake, put in the key, and the F/R switch in the forward position. When you push the go pedal if the solenoid charges up then your EZGO F/R switch is good to go.
What is the gear ratio of a golf cart?
For some models, they are available with a 15:1 gear ratio (provides low end torque), 8:1 (medium speed) and 6:1 (high speed ).#N#Performance gears have been around forever in many different applications, like racing. However, they only made it into the golf car market in recent years. Performance gears not only include those designed for low torque, high speed applications, but also encompass those gear sets designed for high torque and low speed.
How many times does a golf car turn?
Most golf cars have a factory installed gear set (gas and electric) of about 12.5:1 ratio (the motor turns 12.5 times for each rotation of the drive wheel).
Do golf cars have gears?
However, they only made it into the golf car market in recent years. Performance gears not only include those designed for low torque, high speed applications, but also encompass those gear sets designed for high torque and low speed. Since golf cars have a fixed gear set in a non-shiftable configuration (the differential), ...
How to adjust a golf cart?
If you are only making an adjustment to the shift cable, follow these steps: 1 Examine the shift cable closely for any damage. 2 If it is damaged you must go for a full replacement. 3 Do this inspection when the golf cart’s engine is off. 4 Allow the engine to cool before you do this exercise. 5 The adjustment has to be done at both ends. 6 One is the transaxle end and the other end is where you use the handle to shift R and F. 7 You should thoroughly clean the cable using a spray like WD40. 8 You can do the shift cable adjustment, with the shift lever in the forward position and then again changing it to the reverse position. This has been seen to be the better method in the Yamaha G2
How to adjust shift cable on golf cart?
If you are only making an adjustment to the shift cable, follow these steps: Examine the shift cable closely for any damage. If it is damaged you must go for a full replacement. Do this inspection when the golf cart’s engine is off. Allow the engine to cool before you do this exercise.
Why is my Yamaha G9 not moving?
If you are facing the issue of the shift not working forward or reverse, it could be because a detent ball bearing may have fallen off during some other work on the transmission.
Can you replace the shift cable on a Yamaha G2?
You have to access the transaxle on the rear of the cart and pull out the bracket where the cables are attached. You can now replace the cable. Remember to mark the location of the bracket on the vehicle before pulling it out.
