Golf-FAQ.com

how to change governor on ez go golf cart

by Melyna Blick Published 2 years ago Updated 1 year ago
image

Steps to Adjust EZ-GO Golf Cart Governor

  • Step 1 . You may need to remove screws in some carts, and they often have Philips heads, so make sure your toolset has...
  • Step 2 . You may need to use either a screwdriver or hand, and there you'll find a black plastic cover underneath.
  • Step 3 . Use an appropriate screwdriver and remove five screws. Make sure you keep all of these...

Part of a video titled How to Adjust an EZ Go Golf Cart Governor - WikiVideo
3:41
5:06
You can adjust the clutch to send more gas to your engine moving you faster. Find the small metalMoreYou can adjust the clutch to send more gas to your engine moving you faster. Find the small metal rod right next the clutch in the attached cable.

Full Answer

How do I adjust an EZ Go Cart Governor engine?

To adjust an EZ Go Cart Governor engine, start by removing the seat so that you can access the engine. Once the seat is off, remove the screws from the black plastic cover at the rear of the seat and then set the cover aside.

How do you adjust the throttle on an EZGO golf cart?

In some cases, the adjustment can be done by turning the cable nut that connects the cable to the throttle lever in the counter-clockwise direction. This type of governor is often found in 2-cycle golf carts. The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph.

What happens if you adjust the governor on a golf cart?

Your golf cart's warranty is instantly voided if you make any adjustment in the governor. No golf cart shop will help fix an engine-related problem once they find out you have tampered with the governor. Engine damage may occur if the cart is run at excessively high speeds.

How do you adjust the governor on a club car G16?

Wrap a zip-tie around the governor arm bolt and pull it as tight as possible. This stimulates the same effect of tightening the locknut. The following methods show you how to adjust the governor on your Club Car G16 golf cart. Turn the 10mm nut inward until you get the desired speed.

image

How can I make my EZ Go golf cart faster?

One way to increase the speed of EZ Go golf carts is to incorporate an octane booster when you fill the tank. The cart will have more pick-up, and it could gain as much as 5 mph. A different approach is to take out the throttle linkage governor on the carburetor.

Where is the governor on a ezgo golf cart?

The engine is in the front of golf carts, underneath this panel. Take off the plastic cover and set it aside with the seats. Follow the thickest cable coming from the gas pedal until your find a small spring wrapped around a metal rod. This is the governor.

How do you remove a speed limiter from a golf cart?

0:040:46How to remove governor on a Club Car golf cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo the farther you bend that normally the faster it goes and then that's it basically when you wantMoreSo the farther you bend that normally the faster it goes and then that's it basically when you want to return your heart you just bend that back down and go back to normal speed.

Is there a governor on an electric ezgo golf cart?

Considering electric golf carts don't have governors like gas powered carts, the old-school method of simply removing the governor is not an option.

What does removing the governor do?

Removing the governor will increase the maximum rpm of the engine, but the internal parts of the Predator 212 are designed for 3600 rpm. Generally, this isn't an issue with just the governor removal, the internal parts can usually withstand 5000 rpm without breaking apart (unless you go full throttle for too long).

How can I make my electric golf cart go faster without upgrading?

How to Make an Electric Golf Cart Faster Without UpgradesWash Your Cart Properly. ... Inspect the Batteries. ... Refill the Battery Water. ... Check the Gas Pedal and Linkage. ... Measure the Tire Pressure. ... Charge Up Your Battery Unit. ... Lighten Up Your Cart's Weight.

How do I turn off speed governor?

1:072:00How to remove your car's speed limiter como sacar limitacion de ...YouTubeStart of suggested clipEnd of suggested clipSelect on that and then. When you press cancel it means you're done and the tune will start toMoreSelect on that and then. When you press cancel it means you're done and the tune will start to upload you'll hear the fan kick on and then when you're all done it'll say the press select to enter.

Do golf carts have governors?

Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.

How do you change the speed controller on a EZ Go golf cart?

0:428:41EZGO Controller | How to Install Curtis Golf Cart Controller in TXT - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust get this cable. Off. Okay now that we've got that all the controllers underneath this coverMoreJust get this cable. Off. Okay now that we've got that all the controllers underneath this cover which happens to be on the passenger side of the golf car and it's being held on by four bolts.

How do I turn off the governor on my electric club car?

Look behind the governor to find a small metal rod that's permanently attached to the club car and stretch your rubber band enough to connect it to that metal rod. Screw the plastic plate back in place. Once the plate is back in place, the governor is disabled.

What is a golf cart governor?

A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.

How fast is an EZGO golf cart?

The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph.

How to start a golf cart with a gas pedal?

Locate the gas pedal that is fitted to the governor and remove the connection. Re-route the gas pedal to the carburetor. Remove the bolt present on the shaft of the gas pedal. Slide the shaft upwards so that the gas pedal has more play. Tighten the bolt and start the golf cart.

How to change the speed of a golf cart?

Locate the spring on the differential or carburetor that helps in changing the cart speed by adjusting its tension. Increase the length of the cable that is fitted on to the body of the throttle and clutch of the two-stroke engine.

How to ride a golf cart at full speed?

Ride the cart at full speed over a course of known length. This will ensure that the governor controls the speed of the cart within factory specifications. Fasten the black plastic cover and put the seat back in place. Take care when tightening the nut. The more you tighten, the faster your cart will go.

Where is the governor arm on a golf cart?

Locate the governor arm of the golf cart. This is mounted above the rear axle housing and under the cart. Depending on the cart model, there may be a protection plate above the governor.

Can you remove a golf cart governor?

It doesn’t take much time or skill to remove a golf cart governor. With some basic mechanical expertise and general-purpose tools, you can do this yourself. The process is more or less the same in all golf carts.

How to find the governor on a golf cart?

Locate the golf cart’s governor; you can find the governor by tracing the thickest cable running from the gas pedal. This cable runs through the governor on its way to the carburetor. Use a screwdriver—or in some cases a wrench—to loosen the tension on the governor’s springs. You have now adjusted the governor for faster speed.

Who is the writer of GolfCarCatalog.com?

GolfCarCatalog.com – “Adjusting Your Golf Cart’s Governor”. Writer Bio. Richard Kalinowski began writing professionally in 2006. He also works as a website programmer and graphic designer for several clients.

Can a golf cart be a nuisance?

In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds. Luckily, you don’t have to stick with these standard speeds. Golf cart speed is often controlled by a device called a governor, and you can adjust the governor on a golf cart relatively easily to make the cart faster.

Can golf carts be adjusted manually?

By Richard Kalinowski. Governors limit the speed of golf carts but can be adjusted manually. In theory, golf carts make it easier for players to get across the course, saving their much-needed energy for the game. In practice, golf carts can be more of a nuisance than a help, as many standard carts creep along at unbearably slow speeds.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9