How Do I Change a Golf Shaft?
- Scrape off the ferrule at the bottom of the club head's hosel with a utility knife. ...
- Push on the base of the hosel with a pry bar to release the head from the shaft. ...
- Use a utility knife or sandpaper to remove the paint from the tip of the replacement shaft. ...
- Apply epoxy glue to the shaft's tip and insert it into the hole at the base of the hosel. ...
How do you replace a golf club shaft?
How To Re-Shaft Your Steel Golf Clubs
- Carefully clamp the shaft into a vise using a Shaft Vise Clamp. ...
- When removing steel shafts from clubheads, use a torch to heat the hosel. ...
- After 30 seconds of heating, with your gloved hands grasp the head and twist/pull the head. ...
- Using a wire brush remove excess epoxy from the inside of the hosel.
When to reshaft your golf clubs?
What is a golf club shaft?
- Steel – There are two types of steel shafts: stepped steel and rifle steel. ...
- Graphite – These types of shafts are less durable and typically more expensive.
- Multi-material – This type of shaft is a combination of steel and graphite shafts.
How much does it cost to reshaft a golf club?
So, how much does it cost to reshaft a golf club? To reshaft a golf club, you’re likely to spend between $20 to $200 per club. The cost of reshafting your golf clubs will vary greatly depending on where you go to have it done. The cost will depend on the cost of the labor, the number of clubs, and the cost of the new shafts.
How much does a golf club shaft replacement cost?
With a vast array of shafts to choose from, there are options to fit every budget. For the budget-conscious golfer, replacement shafts can start at $30 for no-frills, entry-level quality. For players who are willing to pay a bit more, there are plenty of options lying between $50 to $200, for shafts in all five flex categories.
Can you change shafts on golf clubs?
Shafts can be replaced at golf pro shops and most golf stores, but it is also a fairly easy project to do yourself. Replacing your own shaft can save time and money, and allow you to try a new shaft without purchasing new clubs.
Can you switch shafts on irons?
If you're thinking about changing the shafts on your golf clubs, you can either do them yourself or take them to your local golf shop.
How much does it cost to change shafts on golf clubs?
Reshafting a golf club will cost you $50 to $250. This price depends on the type of shaft you choose, the labor charges, and the other fees charged by the repair company. The cost of reshafting includes the cost of the shaft, the labor charges, and some additional costs pile up.
How do you Reshaft your own club?
12:0322:36GOLF CLUB BUILD - How to reshaft your irons Step by Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd some q-tips. And I run the acetone. Around on the inside of the hosel. Basically just gettingMoreAnd some q-tips. And I run the acetone. Around on the inside of the hosel. Basically just getting any last little bits of residue. Oil anything like that that might hurt the epoxy bond.
How much does it cost to get a driver Reshafted?
The cost of reshafting a golf driver is between $15 and $45 USD. The labor cost of reshafting is usually around $20 USD. However, the actual overall cost can also depend on the materials used as well as the type of grip and shaft you are looking at.
How long does it take to Reshaft a golf club?
If in stock, our Certified club repair technicians can have your new shaft installed and ready for play within 48 hours.
Is it worth it to Reshaft irons?
Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.
Can you put any shaft in a driver?
Yes, most golf Driver shafts are interchangeable. Golf driver shafts can be replaced as long as the new shaft is the same length and made by the same brand of golf club.
Are steel or graphite shafts better?
Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.
How do you install a golf shaft?
4:297:38How to Install Graphite Golf Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel.MoreThe butt of the shaft on a hard surface to ensure the shaft is installed to the bottom of the hosel. Remove the head and place some epoxy inside the hosel dip the tip of the shaft into the epoxy mix.
How do you pull a golf shaft?
6:2514:27pulling a golf shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I like to do is I like to pinch. Down. And then pull back pinch down and then pull back. AndMoreAnd I like to do is I like to pinch. Down. And then pull back pinch down and then pull back. And this way you don't scrape a shaft.
How to remove paint from a golf club shaft?
Use a utility knife or sandpaper to remove the paint from the tip of the replacement shaft. You may also have to scrape off a coating from the tip if you are using a graphite club shaft.
How to remove ferrule from golf club head?
Scrape off the ferrule at the bottom of the club head's hosel with a utility knife.
How to remove epoxy from golf club?
Remove the club from the shaft clamp and tap the butt end of the grip on the floor to push the shaft all the way into the head. Wipe down the hosel with a soft cloth to remove any epoxy residue. Let the epoxy dry for several hours before using the golf club.
How to release hosel head?
Push on the base of the hosel with a pry bar to release the head from the shaft.
What is the hosel on a golf club?
The hosel is the junction point between the head and the tip of the shaft. Check the size with a shaft identification gauge if you cannot find it on the label.
Can you replace a golf club shaft yourself?
It's usually best to consider having shaft replacement done by someone who knows what they are doing. Instead of paying the pro shop the next time you need to change a golf club shaft, save money by doing it yourself at home. Make sure your replacement shaft is the same size as the original or it might not fit inside the club head's hosel.
How to remove a broken shaft from a golf club?
Insert the broken shaft into the vise and remove the shaft by using the heat gun to warm up the hosel and loosen the adhesive that holds the shaft in place. Use medium heat for graphite shafts and higher heat for steel shafts. Once the adhesive has started to melt, pull the broken shaft from the hosel, which is where the shaft meets the club head.
How to put a club shaft in a hosel?
Make sure the inside of the hosel is completely coated, then coat the tip of the shaft with epoxy. Slide the shaft into the hosel and turn the shaft so that the club head is properly aligned to the shaft. If there is a ferrule (small plastic piece), it should be inserted into the hosel first, then coat the interior with epoxy and slide the shaft in.
How to sand graphite shafts?
With the shaft still in the vise, use sandpaper to rough up the tip of the shaft, which will be inserted into the hosel. Graphite shafts may have coating on the end that should be removed with a sharp blade before sanding.
Can a golf club shaft be repaired?
Once a golf club shaft has been broken, it cannot be repaired, but it can easily be replaced.
Why do people change shafts in golf clubs?
People often like to change the shaft in their golf club, whether it's because the current one broke or because they want to try out the newest one on the market without purchasing a new club. To help save money, this is a task anyone can do with the right tools.
How to prevent a golf club from scratching?
Secure the shaft in the vise. Tape the head of the golf club to prevent it from being scratched.
How to get epoxy off of golf club?
Once the head comes off, clean out the hosel area with the small drill bit, then pour a little acetone in the area to thoroughly clean it.
How to epoxy a hosel?
If so, follow the instructions for this. Apply epoxy all around the inside of the hosel. Then , apply epoxy all around the bottom of the shaft, as well. Gently, push the shaft into the hosel and twist it a bit to make sure the shaft is all the way down in the hosel.
How long to wait to clean epoxy off a hosel?
Use acetone to clean off any excess epoxy on the shaft or hosel. Wait roughly 12 hours.
How to twist a golf club head?
Remove heat from the hosel and twist the club head counterclockwise. It should twist off fairly easily. If it does not, apply more heat.
How to remove graphite from hosel?
Apply heat evenly to the hosel for about a minute, using a heat gun or heat torch. This will break down the epoxy that bonds the shaft to the hosel and make removal easier. If you are working with graphite shafts, use a heat gun, not a torch. Wear goggles and protective gloves.
Do you need a new shaft for golf?
Almost every golfer will need a new shaft at some point during his golfing career. Clubs can be reshafted at most golf stores and country clubs, but if you are a do-it-yourself type, removing and/or installing a new shaft is a straightforward project that will save you money.
