Using the floor jack, raise the golf cart so that the tire is slightly above the ground Remove the lug nuts and the tire completely Place the replacement tire on the wheel hub so that the tread appears to go toward the front, thus allowing the grass, dirt, and mud to be diverted away from the tire when in use.
Full Answer
How to change a tire on a golf cart?
You need to lower the lift slowly. Once lowered, you can remove the jack stand from under it and then place your golf cart back on its wheels. The final step is to adjust and move the jack to the remaining tires if you are replacing the other tires.
How to install pre mounted wheels on a golf cart?
The first thing you should do before installing your new pre-mounted wheels is to slide a small jack or lift under the chassis of the golf cart. While keeping all the tires on the ground, loosen the lug nuts on the wheel you plan to replace. After everything is loosened you may need to remove the valve stem from the tire, using a special tool.
How do you remove the front wheel from a golf cart?
Later versions of the cart offered a steering wheel instead of a tiller. Removal of the front wheel for the first decade models is very straightforward. Raise the front wheel off the floor with a jack and place jack stands under the front floor pan frame.
How do you jack up a golf cart?
To jack up a golf cart you’ll need to locate the jack points, engage the parking brake and then use a jack to carefully lift the golf cart in the air. Locate the jack point on both sides of the back wheel.
How do you change a golf cart tire at home?
0:291:53Replacing Golf Cart Tire - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just make sure that you don't jack up your jack just yet you want the pressure on the tire soMoreAnd just make sure that you don't jack up your jack just yet you want the pressure on the tire so that you can remove the nuts without the tire moving we've removed the nuts.
How do you jack up a golf cart to change a tire?
STEP 1: Locate the Jack Points on the Golf cart. ... STEP 2: Engage the parking brake. ... Turn Off the Power to the Golf Cart. ... STEP 4: Chock the rear wheels. ... STEP 5: Find the frame rail underneath the golf cart. ... STEP 6: Put the Jack in and jack up the cart. ... STEP 7: Slowly lower the lift. ... STEP 8: Adjust the tire.
How do you take golf cart tires off?
0:311:47How To Take Off Remove A Golf Cart Wheel - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can just slide it right. Off. All right so once you have the wheel jacked up i i don't do itMoreYou can just slide it right. Off. All right so once you have the wheel jacked up i i don't do it much more than two inches at most it's just not necessary.
Is it easy to change a golf cart tire?
Difficulty: Moderately Easy Remove the lug nuts using the proper socket size. Pull the wheel off of the lug studs. Use the valve stem tool (as per package instructions) to remove the valve from the tire stem. Lay the wheel down on pavement and push the tire down as close to the rim as you can get.
Where do you put a jack on a golf cart?
0:321:54How To Lift Your Golf Cart Onto Jack Stands | RZ Carts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe front frame rail.MoreThe front frame rail.
Where do you jack up a golf cart?
Typically, the best jack points are usually under the frame rail of the golf cart, either in the front of the rear end of the vehicle. Take care to use the jack points under the frame rail because the rail is strong and can handle the weight and pressure applied. Using any other area can damage your golf cart.
How do you fix a flat tire on a golf cart?
1:054:12How we fix our flat golf cart tires using the TiteSeal fix in a can productYouTubeStart of suggested clipEnd of suggested clipSo put your valve cap somewhere near the top above the nine o'clock. And three o'clock positionMoreSo put your valve cap somewhere near the top above the nine o'clock. And three o'clock position preferably close to the six o'clock. And then turn this onto the wheel.
How much does it cost to change a golf cart tire?
Depending on your setup as far as tools and equipment are concerned, you may need a professional to complete this project. If you are purchasing a set of tires that are not mounted, you will spend around $50.00. For premounted tires, you can expect to pay $75-$200 per tire.
What size are the lug nuts on a golf cart?
6mm (4 holes x 101.6mm). Most golf carts (American and Foreign made) use this standard 4-bolt lug pattern.
Do golf cart tires need balancing?
All four wheels must be in balance for best performance. The balancer is simple, with a handle that allows you to spin the wheel and see whether it's appropriately balanced. It is unbalanced if the wheel wobbles in any direction or stops spinning. If you feel any vibration, balance your tires.
Do golf cart tires have inner tubes?
Yes, most modern golf cart tires are tubeless and come in a wide variety of sizes and tread patterns. Tubeless tires are a pneumatic tire that does not have a separate inner tubing that must be filled up with air.
Does slime work on golf cart tires?
1:565:03How to use Tire Slime to fix a Golf Cart Tire - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make sure it's nice and tight fairly tight just can't barely hand tight. Also I like when thatMoreAnd make sure it's nice and tight fairly tight just can't barely hand tight. Also I like when that slime added to the tire.
How do you fix a flat tire on a golf cart?
1:054:12How we fix our flat golf cart tires using the TiteSeal fix in a can productYouTubeStart of suggested clipEnd of suggested clipSo put your valve cap somewhere near the top above the nine o'clock. And three o'clock positionMoreSo put your valve cap somewhere near the top above the nine o'clock. And three o'clock position preferably close to the six o'clock. And then turn this onto the wheel.
How do you remove golf cart lug nuts?
How to remove lug nuts on golf cartOpen the lug nuts with the wrench and hammer while the wheel stays on the ground.After loosening the nuts, use your hand to open the nuts and replace them or tighten them for the performance.
How much do golf carts weigh?
between 500 and 1,100 poundsA golf cart typically weighs anywhere between 500 and 1,100 pounds. The wide discrepancy has to do with the make, model, and type of golf cart. Additional modifications can also increase the weight of a golf cart.
How to lower a golf cart tire?
Using the floor jack, gently lower the golf cart so that some pressure is put onto the new tire (in order to keep it from spinning) Tighten the lug nuts until they are completely secure. Using the floor jack, completely lower the golf cart until the weight rests on the tires – not the floor jack. Remove the floor jack from underneath the golf cart.
Where to put replacement tire on golf cart?
Place the replacement tire on the wheel hub so that the tread appears to go toward the front, thus allowing the grass, dirt, and mud to be diverted away from the tire when in use. NOTE: If you will not be replacing your tire right away, lower the golf cart using the floor jack so that the golf cart is level until you return.
How to remove lug nuts from golf cart?
Do not remove the lug nuts – simply loosen them. Place the floor jack underneath the golf cart frame, near the tire being changed. Using the floor jack, raise the golf cart so that the tire is slightly above the ground. Remove the lug nuts and the tire completely .
How to stop a golf cart from rolling?
Make sure that the golf cart is on level ground before changing the tire. Turn off the engine and put the parking brake on. Wedge material against the other tires (not the one that is being changed) to prevent the golf cart from rolling. Using the tire tool, loosen the lug nuts of the tire being changed in a counter-clockwise direction.
Why do you need a floor jack for a golf cart?
A small floor jack is needed because so it can fit underneath the golf cart. And since golf carts are lighter, smaller floor jacks are able to withstand the weight. Bricks, wood, or other material that can be used to wedge underneath other tires to prevent rolling.
What to use to wedge a golf cart?
Floor Jack – make sure that it is able to fit underneath the golf cart. Bricks, wood, or other material that can be used to wedge underneath other tires to prevent rolling. Socket wrench, racket, or other tire tool that will be used to remove the lug nuts. Replacement tire or fixed tire.
Can you put your arms under a golf cart?
Do not put your legs, arms, or other body parts underneath the golf cart, even when raised with the floor jack. Do not allow other people or children to be seated in the golf cart while you are changing the tire. Do not allow other people or children to play around the golf cart while you are changing the tire.
Place the Jack Near the Flat Tire
At first I couldn't get the jack up under the rear axle - but a group of golfers came to the rescue and lifted up the golf cart so I could get the jack in near the tire that went flat.
Remove the Golf Cart Wheel Cover
Next I removed the golf cart wheel cover so that I could get to the lug nuts and wheel.
Loosen the Lug Nuts
I loosen the lug nuts with a socket and ratchet wrench. But I didn't take them off the tire just yet.
The Jack
Next I went back and raised the golf cart with the jack so that the tire was now barely off the ground as you can see in this picture.
Lower the Jack & Tighten the Lug Nuts
I lowered the jack some - just enough so that there is a little pressure on the golf cart tire - but not too much. Then I tighten the lug nuts.
Continue to Lower the Jack
Next I lowered the jack until all the pressure was not residing on the new tire. Remove the jack. Replace the wheel cover.
Test the Flat Tire for Leaks
I brought the golf cart tire to the local auto mechanic shop to have it tested for a leak or a hole. First they inspected it and couldn't see any puncture or hole. Then they sprayed it with soap and immersed the tire in a tank of water where they check for bubbles.
When did Harley Davidson golf carts have steering?
In 1963 , Harley Davidson golf carts were only available with 3 wheels and the steering was controlled by a tiller turning the front wheel. Later versions of the cart offered a steering wheel instead of a tiller.
How to remove a cotter pin from a car?
Raise the front wheel off the floor with a jack and place jack stands under the front floor pan frame. Remove the cotter pin on the right side (facing the vehicle) and unscrew the castellated nut. Each fork has a clamping nut that holds the axle in place.
What year was the front wheel on a Harley Davidson?
Harley Davidson Front Wheel – 1970 and Later. 1970 and later Front Wheel Assembly. The 1970 and later Harley Davidson models have a different axle and mount from the previous years. The axle is similar in appearance, but the threads at the end actually screw into the threaded hole on the fork (shown in the photo below).
What is reinstallation on a wheel?
Reinstallation is the reverse of this procedure, but attention needs to be paid to the drag on the axle. The axle nut is also an adjustment for the wheel bearings. Once the axle is back in the fork install the washer and the castellated nut back in place, then tighten the nut until there is a slight drag turning the wheel.
How to jack up a golf cart?
The steps to jack up a golf cart safely are: Locate the jack points. Engage the parking brake. Turn the power off on your golf car. Choke the rear wheels. Locate the frame rail underneath the golf cart. Place the jack in the jackpoints. Carefully lift up the golf cart. Slowly lower the jack.
What do you need to jack up an EZGO golf cart?
In order to safely jack up your EZGO or Club Car golf cart, you’ll need a jack, jack stand and a floor mat. Jack. Jack stand to raise the vehicle off of the ground. a floor mat (optional) If you don’t have a jack, a cinderblock will work, but this is not recommended due to safety concerns. A jack stand should be used to support ...
Why do you need a chock on your golf cart?
A chock will help to keep everything stable when lifting your golf cart.
Why do you need to engage the parking brake when jacking up a golf cart?
It should be engaged before jacking up a golf cart because it will help prevent the rolling of the vehicle during the lifting process and keep wheels from spinning while being lifted off the ground.
What is the difference between a golf cart and a jack?
The difference between jacking up a vehicle and lifting a golf cart is that when you jack up a vehicle, the tires are off the ground. When lifting, it is usually lifting just one tire.
When do golf carts need to be jacked up?
A golf cart needs to be jacked up at times when the tires need replacing or if there is a flat tire.
Where is the jack point on a car?
Locate the jack point on both sides of the back wheel. The jack point is usually located by the side frame, just behind the front wheel or inboard of where they meet.
What is a golf cart tire?
The golf cart Tire is pretty much what you’d expect. It’s a big piece of black rubber that is shaped around the silver metal that supports the tire. That silver metal part is called the wheel. A rim is just another name for a wheel. So if you’re confused about the difference between rim and wheel, there is none.
What does it mean when a golf cart tire is DOT approved?
DOT Approved. If your tires are DOT approved, this means that they are certified through the Department of Transportation. The treads are designed for road use, and will come in sizes such as 8”, 10”, 12” and 14” for your golf cart wheels.
How long do golf cart tires last?
Depending on the amount of use they get, and how hard you ride, tires will last anywhere between 2 and 4 years.
Why are golf cart wheels so popular?
Golf cart wheels are becoming more popular in the custom golf cart industry, and for good reason. They make the golf cart stand out, and add a level of awesomeness that turns heads when it rolls down the road.
What size tires do you need for a club car?
You can find High Profile tires in sizes such as 8, 10, 12, and 14 inches. If you own a Club Car, EZGO, or Yamaha, you’ll be able to get away with an 8” all terrain tire without a lift kit. As you can see, the type of tire you purchase can directly affect whether you’re going to need a lift kit.
Can you put low profile tires on a golf cart?
Low Profile tires are going to be thinner, and more versatile when it comes to fitting your golf cart. Chances are, you’ll be able to fit most low profile tires on your golf cart without a lift kit.
Can you ride a golf cart on the fairways?
If you have meaty tires on your cart, chances are the golf course won’t approve.
How to: replace the Cam Lever on your Speed Cart
How-to video demonstrating replacement of the cam lever on a Sun Mountain Speed Cart.
How to: Replace the pivot fitting on your Speed Cart
How-to video demonstrating the replacement of the pivot fitting on the Sun Mountain Speed Cart.
How to: Replace the lower pivot fittings
How-to video demonstrating how to replace the lower pivot fittings on your Sun Mountain Speed Cart.
How to: Add the seat to your Speed Cart
How-to video demonstrating adding the seat kit to the Sun Mountain Speed Cart.
How to: replace rear tires on Speed Cart
How-To video demonstrating replacement of rear tires on Sun Mountain Speed Cart golf push cart.
How to: Adjust the wheel tracking
How-to video demonstrating how to adjust the tracking of the front wheel of your Speed Cart.
How to: Replace the handle latch on your MC3 Micro-Cart
How-to video demonstrating how to replace the handle latch on your MC3.