How to Adjust a Golf Club Length
- Lengthening Effects. Lengthening a club gives you a longer swing and, potentially, a faster swing speed. ...
- Trim the Shaft. After you've decided to trim the shaft, consider whether to trim the tip or the butt end. ...
- Lengthen a Club. Extend your steel or composite shaft up to 2 inches by adding a piece onto the butt end of your club.
- Install a New Shaft. ...
How long can you extend a golf club?
The maximum length you can add is up to an inch and a half and not over cause there is a risk of compromising the integrity of the shaft, which can make it break easily. An extension can be used in lengthening the golf club where it is fitted in the butt end of the shaft, and once dried, the golf club can be cut to the preferred length.
What is the proper club length adjustment for a golfer?
For instance, for a golfer with a height of 6’3″ and a wrist to toe measurement of 39″, the proper club length adjustment would be ½”. It means that ½” should be added to the standard golf club to make it perfect, considering his height and wrist-to-toe measurements. The fitter can do more to make the measurements even better.
Can you cut a golf club to length?
An extension can be used in lengthening the golf club where it is fitted in the butt end of the shaft, and once dried, the golf club can be cut to the preferred length. Flat Lie Angle. There is a risk of slicing the ball when your angle is too flat.
Does long shaft length mean longer golf clubs?
The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How do I shorten my golf club length?
How to Shorten a Golf ClubSecurely fasten the golf club in place using a vise on a workbench or similar setup, such as a golf club regripping station used at golf courses or pro shops.Cutting off the rubber golf grip using a sharp blade, such as a utility knife with a hooked blade.More items...•
Can I convert my irons to one length?
Golfers who are interested in a Single Length set are going to have to test hit clubs properly engineered and manufactured for assembly as a Single Length set to be able to try the concept. It is completely impractical to alter an existing iron set to the Single Length concept.
How can I shorten my golf clubs at home?
Cut down one side of the old grip with a utility knife. Roll back the edges to peel the grip away from the tape on the club shaft. If the tape is still sticky, use a solvent to break down the adhesive as you pull up on the grip. Use your utility knife to scrape off the layer of tape.
How much does it cost to cut down a golf club?
How much does it cost to shorten golf clubs? On average, it will cost $3-5 per club plus the cost of a new grip to shorten your clubs. If you're looking to save your old grips, you won't have to pay for new grips, but you'll have to pay a save grip fee of around $10 per club.
Can I cut my irons down?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
Do you lose distance with one length irons?
Luckily swinging with a one-length iron set should not make you lose distance. You may see a few yards difference with your long irons, but your short irons will likely end up going a few yards further. Sometimes the longer length on the short irons gives them a bit more distance, but it won't be significant.
Do any pro golfers use single-length irons?
DeChambeau is currently the only Tour player who uses single-length irons, but Norman said he thinks that could change in the future.
What is the advantage of one length irons?
One-length irons allow you to stand to the ball in the same way regardless of the iron you're using, in theory helping with consistency of strike and club speed. Essentially you can swing the same way regardless of what club you have in your hand.
Can you cut your own golf shafts?
To do that, the DIY golfer will have to: Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft.
What happens if I cut an inch off my driver?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
What happens when you shorten a golf club?
The most important thing to remember about the distance when you shorten your irons is that it does not always mean a decrease in distance. If your irons were too long for you to be confident or to have the right swing speed or posture, chances are you would gain distance if you shortened them.
Can you shorten golf shafts?
Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How long should your golf clubs be if you are 5 7?
2. Get Your Wrist-to-Floor Measurement (once more, “static” fitting)OVERALL HEIGHTWRIST-TO-FLOOR MEASUREMENTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″32 to 34 inchesminus 1/4″5'7″ to 6'1″34 to 37 inchesstandard length in inches6'1″ to 6'2″37 to 38.5 inchesplus 1/4″6'2″ to 6'4″38.5 to 40 inchesplus 1/2″7 more rows
What happens if I cut an inch off my driver?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
How long should golf clubs be for 6 2?
For example, for a golfer that stands 6'2” and has a wrist-to-floor of 39”, the recommendation for proper club length would be 1/2” longer than standard length.
How to extend the length of a golf club?
How to extend the length of your golf club. Extending the golf club length involves adding more length to the shaft. It is possible to replace the shaft with a longer one, but that will be a little bit more expensive. The cheaper option is to use a shaft extension. On that note, you will only need to replace the grip.
How to make a golf club longer?
To make your golf clubs longer, you can choose to purchase a more elongated shaft or use a shaft extension. Follow the steps outlined above to make your golf club longer or consult a professional.
How to cut a golf club into a point?
Using a hacksaw, carefully cut through the marked point. Ensure that the golf club is secured on a vice or clamp. It would be best if you cut it through in a one-way direction to achieve an even cut. Smoothen the edges using a sandpaper or kitchen knife and proceed to install the grip.
How to shorten a golf club?
In this case, cut the shaft to a size that fits your type of play. It is important to note that once you cut the shaft, the golf club will become lighter and will tend to stiffen.
How long does it take for a golf club to dry?
You now have the length of your golf club extended. Allow it to dry for about 15 hours before trying it on the course.
How to access a shaft?
To access the shaft, you need to remove the grip. Using a knife, cut through the grip from top to bottom. Remove the double-sided tape from the shaft using the same knife. Be extra careful, so you don’t injure yourself or damage the shaft.
How much can a golf shaft extension lengthen?
The shaft extension can lengthen the club by up to two inches. If you need more distance from your club, then the following steps will help you adjust the golf club to fit your play type. If your shaft is made of steel, then use a steel extension and if it is made of graphite, then use a graphite extension.
Why do golf clubs change length?
Changing your golf club's length also changes the club's playing characteristics -- which is the reason golfers decide to shorten or lengthen a club. On the other hand, maybe you received a driver as a gift that's a bit too long, or you found an otherwise perfect wedge at a garage sale that doesn't quite fit.
How to remove a clubhead?
Use a shaft extracting machine to remove the clubhead. Heat the hosel to melt the glue before pulling off the clubhead. Trim a graphite or steel shaft using a hacksaw, cutoff wheel or chop saw. You can also use a tubing cutter on a steel shaft. Put a new grip on the club if you've trimmed from the butt end.
How to remove grip from butt?
Remove the grip with a blade if you're cutting from the butt end. Use a hooked blade on a graphite club to avoid damaging the shaft. To trim from the tip, heat the ferrule with a heat gun to loosen the glue, then cut the ferrule off the shaft. Use a shaft extracting machine to remove the clubhead. Heat the hosel to melt ...
Does lengthening a golf club make it faster?
Lengthening Effects. Lengthening a club gives you a longer swing and, potentially, a faster swing speed. The increased speed will translate into more distance if you hit the ball squarely. But the added weight may cost you some control and make it more difficult to hit the club's sweet spot. Longer shafts also become more flexible.
Does trimming the butt end of a golf club make the shaft stiffer?
If you trim the club from its butt end you'll also increase the shaft's flexibility, because the narrower, more flexible portion now makes up a greater percentage of the shaft's overall length. By the same logic, trimming the tip makes a shaft stiffer, but the club's most flexible area is reduced.
What happens if you play a golf club too long?
Your posture will be affected. If the club is too long, you will tend to be more upright. When the club is too short, you will tend to bend forward more than you should . You should therefore pick a club that is custom made for your type of play.
What is custom measurement golf?
Custom measurement is designed to equip you with golf clubs that suit your needs and your game type. These measurements are necessary for providing the appropriate golf clubs. The steps below outline steps for you to measure and acquire custom golf clubs from a golf store.
Why do you need to fit a golf club?
A custom-fit golf club will improve your game and performance on the scoreboard. Therefore you should fit your golf club appropriately per your type of play. As a golfer, you should make sure that your golf clubs are fitted to the appropriate lengths.
Can a golf fitter ask you to swing a golf club?
The fitter can do more to make the measurements even better. In step two above, we note that the fitter can ask you to swing a standard golf club to understand your posture and how you swing the club. The measurements are necessary for coming up with the correct plus or minus adjustments.
How to measure golf club length?
Important Information before we know “How to Measure the Golf Club Length.” 1 The standard irons designed for women are usually an inch shorter than the standard irons designed for men. 2 The United States Golf Agency (USGA) limits the maximum length of golf clubs. 3 The minimum length for all the golf clubs, including putters, is 18 inches. 4 The maximum length for all golf clubs except the putters is 48 inches. 5 The putters do not have the maximum length limit. 6 The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length. 7 A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three.
What is the minimum length of a golf club?
The minimum length for all the golf clubs, including putters, is 18 inches. The maximum length for all golf clubs except the putters is 48 inches. The putters do not have the maximum length limit. The shaft length has everything to do with the length of the golf clubs. The longer shaft does mean longer golf club length.
How long should a golf shaft be?
The chart recommends + 0.25 inches. It means that your golf shaft has to be made 0.25 inches longer than the standard length. Similarly, if your height is 66“ and the wrist to floor distance is 31.5 inches, the chart recommends – 0.75 inches.
What does a longer shaft mean?
The longer shaft does mean longer golf club length. A golfer uses woods, hybrids, and irons for different types of shots. It is the reason why their golf club is mostly empowered with a mix of these three. Therefore we must know about the standard length of the woods, and irons. Let’s first discuss the standard lengths of woods.
How to measure club size with LDA?
The following are steps of measuring the club size using the LDA method. Step 1. First, put the shaft against the wall so that the toe of the driver is placed on the ground. Step 2.
Where is the shaft of a putter located?
It is because the shaft of the putter is mostly installed in the heel. The shaft placement is either near the heel or in the center of the club head. Therefore, it is essential to measure the putter differently. The method of measuring the length of a putter is described in the following steps. Step 1.
Where to place ruler on golf club?
Place the club in the playing position so that the sole of the club / driver is touching the ground. A golf ruler is then placed at the backside of the club so that the top of the ruler is touching the ground by the club’s heel. Now, by using the reading on the measuring rod from the end of the grip cap.
How does lengthening a shaft affect swing?
Timing and Feel. In many ways, the biggest effect of lengthening a club shaft is how it affects your ability to swing the club. The combined changes in length and swing weight make the club feel different. In turn, these changes will affect your timing and even your mechanics, perhaps without you even realizing it.
What does swing weight mean?
Swing Weight. Swing weight isn't an actual weight so much as a comparison of the difference in weight between the club head and the butt end of the shaft. It's expressed as a letter-number combination, such as C9 or D2. Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy ...
Can you add extenders to your golf shaft?
You may add extenders to your existing shafts or you may replace your existing shafts with longer ones. The effects can be very different. Tom Wishon has written extensively about the effects of changing shafts in "The Golfsmith Practical Clubfitting Program" guide.
Does lengthening the shaft make the club head heavier?
Lengthening the shaft increases the swing weight, which makes the club head feel heavier. It may even make the club too heavy for you, which will slow down your swing speed and actually reduce your distance.
Does lengthening a golf club shaft affect accuracy?
Accuracy. As a general rule, lengthening any club's shaft will reduce your accuracy with that club. The longer the club, the more difficult it becomes to hit the ball solidly. This is especially true when the ball is on the ground rather than on a tee, since hitting the ball fat is more likely.
Is shaft length a factor?
Shaft length is certainly a factor in how far you hit a given club. However, some clubs benefit more than others. Installing longer shafts in wedges and short irons will almost always result in more distance, as most players have little trouble swinging the shorter clubs.
Do golf clubs have longer shafts?
Effects of Lengthening a Golf Club Shaft. Tall players like Bubba Watson have to use longer shafts in all of their clubs. Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts.
How does a half inch length change affect a golf swing?
Every half-inch length change alters the lie by a degree. There will be an alteration in the way you grip the club, change in your positioning or posture while taking a swing, you may need to bend it a little to drop your hands a bit, or you may stand more upright to make up for the change in distance. Since there will be changes in the length of ...
What is the best way to get accurate golf clubs?
Club fitting is the best way to get accurate golf clubs, cause there is no standard lie angle that you can find in any golf store, and you need the fitting, so it will be according to your build, swing type, and preference.
What does it mean when a golf club is too upright?
A club that is too upright every time you swing means that the heel of the clubhead is lower than that of the toe. The tendency here is for the ball to hook, especially for those who are right-handed golfer where the curving of the shot, often takes place. An upright lie angle is more common because the golfers who are just beginning in ...
Why does my golf club slice?
There is a risk of slicing the ball when your angle is too flat. This means that the angle between the shaft and the ground is smaller. Once your club is too flat for your swing, the toe of your golf club will have a lower range than the heel when it should be leveled. Slicing happens because of such reasons.
How to increase swing weight?
Swingweight can easily be increased by using lead tape placed at the clubhead. Lengthening a club softens the shaft a fraction while increasing the swing weight of the club. Each time you add length like half an inch will also add three swing weight points.
How to get the right lie in golf?
To get the right lie, make sure that whenever you change the length of the golf club, you are also trying out the clubs to match your swing. Pro-golf shops can adjust some clubs to match it according to your need.
What does a club fitter do?
A club fitter can do this for you where they will place a piece of tape on the iron’s sole, and once this produces a mark on the ground, it will determine what adjustments need to be made to your golf club.
