To test your Yamaha G1 starter generator:
- Disconnect all the wires before you begin your tests.
- Connect post F2 to the positive terminal of your cart battery and A1 to the negative terminal of your cart battery.
- After that, when you connect A2 to F1, your starter should spin forward.
- When you connect F2 to the positive terminal of the battery and A2 to the negative terminal of the battery as well as connect A1 to F1, your starter ...
- Check the Ohms running through the red and green wires using a multimeter.
- Use a multimeter set to Ohms (O) to touch the green wire with one probe and the red wire with the other probe.
- The reading should be about 5 Ohms.
Full Answer
How do you test a golf cart starter generator?
How Do You Test a Golf Cart Starter Generator? Here’s a general set of instructions that should work for most golf cart starter generators. To test the starter generator: 1) Put the neutral lock-out cam in service. 2) Place the forward and reverse lever in neutral. 3) Chock the wheels.
How do you test a Yamaha G1 starter generator?
How Do You Test a Yamaha G1 Starter Generator? There are four posts on the starter generator that should be labelled A1, A2, F1 and F2. Also, there should be a green wire and a red wire coming out of the side of the starter. 1) Disconnect all the wires before you begin your tests.
How many volts is a starter generator on a Yamaha golf cart?
The ideal voltage output from the starter generator in these carts is around 14-15 volts. The Yamaha G1/G9 has a forward solenoid and a reverse solenoid in place, which makes the wiring a lot more different from that in other golf carts. The starter generator has six terminals, DF, D+, A1, A2, F1, F2.
Why is my starter generator not charging my golf cart?
Why Your Golf Cart Starter Generator is Not Charging If your starter generator is not charging properly, it may be that the solenoid, voltage regulator or brushes are faulty. If you’ve ensured that all of these parts are working fine, the starter generator may not be drawing enough current to regenerate the battery.
How do I test a golf cart starter generator?
0:011:03How to Check the Generator on Your Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you should see the voltage jump up from around 12 volts with the cart running to about 16 voltsMoreAnd you should see the voltage jump up from around 12 volts with the cart running to about 16 volts that that happens that proves the generator is fine you simply need to change.
How do you check a starter generator?
0:000:42Zip Tip Starter Generator Testing - YouTubeYouTubeStart of suggested clipEnd of suggested clipGround it hit your start side or your a side or your G side not the field side spin the engine up toMoreGround it hit your start side or your a side or your G side not the field side spin the engine up to speed. And while it's spinning down come over to your. Field.
How many volts should a starter generator put out?
The ideal voltage output from the starter generator in these carts is around 14-15 volts.
How does a starter generator work on a Club Car golf cart?
The starter generator works in two ways; the starter portion cranks the engine and the generator portion recharges the battery. When the gas pedal is depressed the starter cranks the engine over. When it begins to run on its own, the generator portion of the unit begins to charge the 12-volt battery.
How do you polarize a starter generator on a golf cart?
0:391:10How to Polarize at the Generator - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your live jumper lead and touch it touch touch. You're going to get a small spark. When that'sMoreTake your live jumper lead and touch it touch touch. You're going to get a small spark. When that's happened that's the end of it lay. Your field wire back on where she belongs. And the job is done.
How do you fix a starter generator?
0:329:20How to Your Rebuild Garden Tractor's Starter Generator - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo disassemble your starter generator you simply remove these two long bolts that's holdingMoreTo disassemble your starter generator you simply remove these two long bolts that's holding everything together you'll find them on the brush. End of the starter generator.
How do you test a 12 volt starter generator?
2:533:36Starter Generator Field testing - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake 12 volts tap your armature winding off and and hit your field. And you should feel someMoreTake 12 volts tap your armature winding off and and hit your field. And you should feel some resistance.
What does F2 mean on a starter generator?
As soon as the positive cable touches the F2 stud, the motor should start to spin in a counter clockwise rotation. If the motor spins, then it is working correctly. If the motor fails to spin, then it is defective and needs to be replaced.
How do you test a voltage regulator on a golf cart?
How to Test a Golf Cart Voltage RegulatorPark the golf cart on a level, hard surface and activate the parking brake. ... Keep a jack below the frame at the back of the golf cart. ... Lift the golf cart seat upwards until the batteries are exposed.Turn on the voltmeter and set the reading to 20 volts.More items...
How do I know if my starter is bad on my golf cart?
A simple check with the lights on your cart will help you locate the fault again. A bad starter generator gets hot quickly when the cart starts moving around. Within a short time, it might start letting out smoke as well. Once the smoke starts coming out of it, you know that your starter generator is damaged.
How do you test a ignition switch on a golf cart?
Testing a Club Car Ignition SwitchFind the back and red wires on the back of your battery pack.Connect the black wire to the negative terminal and the red to the positive.Keep the cart turned off while you work on it.Check the wires with a probe meter while the cart is off – only one wire should have a charge.More items...
How does starter generator work?
A starter generator is a combination of two different engine components. The component can be found in lawn tractors, garden tractors and aircraft. The starter component generates the initial ignition, starting the vehicle, and the generator maintains the voltage while the vehicle is being operated.
How do you test a 12 volt starter generator?
2:533:36Starter Generator Field testing - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake 12 volts tap your armature winding off and and hit your field. And you should feel someMoreTake 12 volts tap your armature winding off and and hit your field. And you should feel some resistance.
How do you bench test a club car starter generator?
Bench TestingStep One: Place your starter generator in the vise or have someone hold it carefully.Step Two: Attach the 10-gauge jumper wire from F1 to A2.Step Three: Attach the negative (BLACK) battery cable to the negative terminal on the battery.More items...•
How do you test a 12 volt generator?
0:031:00Generator - How to Test (version 1-28-2009) - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake a jumper league connected to an own power source connect. It right on there we're puttingMoreTake a jumper league connected to an own power source connect. It right on there we're putting straight power right into the field. When you've done that watch your voltmeter.
How does a generator starter work?
The starter part of the component is composed of a stator, windings, armature and brushes. The armature is connected to wires wound in a circular motion making a field coil. Voltage is sent to the coil, then into the brushes and to the armature. As the voltage flows through a series field, a magnetic field is created.
How to connect a black battery to a starter?
Step One: Place your starter generator in the vise or have someone hold it carefully. Step Two: Attach the 10-gauge jumper wire from F1 to A2. Step Three: Attach the negative ( BLACK) battery cable to the negative terminal on the battery.
How many volts does a starter generator need?
Battery must have 12.5 volts. DO NOT use a jump box) Vise to Hold Starter (You can have someone hold the starter if you don’t have a vise) Be sure that while you are testing the starter generator, that you keep any loose clothing, jewelry, or your fingers away from the pinion gear as it’s spins.
Can you remove a starter generator from a golf cart?
This is an off-vehicle test, so you need to remove the starter generator from the golf cart. Before you go through the trouble of removing the starter, make sure that the battery is charged and working properly.
What is a golf cart starter?
A golf cart starter primarily serves two functions; turning over the engine to start the cart and act as a key link in getting the battery charged. The starter has enough current to crank the engine. The generator converts the alternating current to direct current and recharges the battery.
Why is my golf cart generator not charging?
If your starter generator is not charging properly, it may be that the solenoid, voltage regulator or brushes are faulty. If you’ve ensured that all of these parts are working fine, the starter generator may not be drawing enough current to regenerate the battery.
Why is my EZGO golf cart not charging?
This is because of the configuration of EZGO Golf carts. Almost all of the EZGO models have a setup that is foolproof to any generator failure. If the battery is not charging, it is usually the wiring or the voltage regulator. The possibility of having an starter generator that doesn’t charge the battery is very low.
How many volts does a starter generator have?
If the starter generator is showing 15 to 16 volts during the full field test, replace the voltage regulator.
What is a starter generator?
The starter generator is an electric motor that runs on the voltage drawn from the cart’s battery. After igniting and cranking the engine, when the starter generator is spinning at over 1200rpm, it starts converting the AC it produces to DC to regenerate the battery.
How to tell if solenoid is faulty?
A simple voltmeter or a multimeter set at voltage reading should be enough to identify a faulty solenoid.
Can a weak starter generator be fixed?
Here are a few steps using which you can ensure that your starter generator doesn’t fall under the ‘weak generator’ category. These steps help you identify if there is a problem in any of the8 starter generator components. Once the check is completed, the defective component can be fixed to get the starter generator working as intended.
What is a golf cart?
Golf carts are also known as golf cars. The term "cart", in its purest sense, refers to a vehicle that does not travel under its own power. Golf cars, however, are most commonly referred to as golf... link to Club Car DS Wiring Diagrams 1981 To 2002.
What was the first Yamaha cart?
Yamaha’s premiere cart in 1979 was the G1A Model J10 Gas-powered vehicle that featured an Autolube Oil Injection System to supply oil to the engine in precise oil-to-gas ratios. This eliminated the premixing of the oil and gas and improved combustion, oil consumption, and carbon buildup. In 1980, Yamaha introduced the G1E 36 volt Electric J14 series.
What is an electric cart solenoid?
The first generation electric cart had solenoids (or relays) that had all terminals on one end of the unit. These solenoids are no longer available and are replaced with a model with terminals on both ends. Below is the retrofit for replacing these with a contemporary solenoid.
What is a bad connection on a Yamaha G1?
Also try disconnecting the black, and black/white wires from the stop switch under the gas pedal. If you get spark with those wire disconnected the stop start switch is bad. Here's a link to a thread that has a post about testing the Yamaha G1 CDI on page 2.
Does Yamaha G1 have a CDI?
Yes the Yamaha G1 uses a CDI to send the signal to the coil.
How does Golf Cart Starter Generator Work?
In this article, we will describe the full process of a starter-generator works. Anyone can be helpful by reading this article. We show here some important steps with troubleshooting a golf cart starter generator. And also find a way to resolve these kinds of issues.
What is a golf cart starter generator?
For every golf cart, there should be a starter generator. It is known as a very special device that helps for turning the engine and also charges the battery of the golf cart simultaneously. Usually, it works in two ways.
How does golf cart starter generator work?
Generally, every electric golf cart and gasoline golf cart has a starter generator. It starts to work when the gas pedal decreased its workability, then the engine of the golf cart needs to crank. This job is done by the starter. The starter cranks the golf cart engine properly while the battery is getting charged up by the generator.
