Golf-FAQ.com

how to check lie and loft on golf irons

by Dr. Horace Kerluke Published 3 years ago Updated 2 years ago
image

Another way to check is to measure your distances and make sure that consecutive clubs have the same incremental differences in distance as they did when new. If not, then the loft may have changed in some of them. If the shots from some of your clubs are starting to go left or right consistently, then check the lie angles.

Part of a video titled Checking Your Lofts and Lie Angles - YouTube
0:26
3:40
And then our lie angle is coming in at about 59 degrees so you're looking at about two and a halfMoreAnd then our lie angle is coming in at about 59 degrees so you're looking at about two and a half degrees flat and one degree strong that could be based on specs these are the read spec for callaway.

Full Answer

Is it time to check lofts and lie angles on irons?

Even if your course is open, go ahead and use the coming weeks to have the lofts and lie angles checked on your irons and wedges. It sounds trivial, but this is probably the most important tune-up you’ll make all season. Let’s start with the basics: the loft on each iron and wedge doesn’t remain static during the life of the set.

Should I Check my lie angle when playing golf?

Definitely check lie angle. This is a case of the lie angle too flat when you see the ball hit marks and wear concentrated on the toe of the club. When you are practicing with a wrong lie angle, you end of getting use to bad habits.

How do I know if my lie angle is too flat?

This is an example of the lie being to upright for your swing and after you have been hitting the irons for a while, the ball mark and wear on the face is concentrated on the heel. Definitely check lie angle. This is a case of the lie angle too flat when you see the ball hit marks and wear concentrated on the toe of the club.

Should each Golf Club have a different loft?

Each golf club in your bag should have a different loft. A golf club’s loft – the angle of the clubface relative to the shaft – helps determine how high you’ll hit the ball. All else being equal, you’ll hit the ball higher with a higher-lofted club, although the more loft a club has, the more distance that is sacrificed.

image

How do you measure golf clubs loft and lie?

0:166:36Golf clubs: Loft, lie, and why they matter??? [Beginner's guide]YouTubeStart of suggested clipEnd of suggested clipAnd go the shortest distance. So as we go from the longest club in my bag the driver to the shortestMoreAnd go the shortest distance. So as we go from the longest club in my bag the driver to the shortest. This wedge the lofts progressively. Increase and the ball will go higher in the air.

How can you tell which golf clubs lie?

Draw a straight line on the back of the golf ball, and have it facing the clubhead. After you make impact the line will appear on the face. If it's pointing towards the toe, then your club is too upright. If it's pointing towards the heel, then it's too flat.

What lie angle should my irons be?

Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)

How often should you check loft and lie?

At the very least, you should check your loft and lie at least once a season. I'd recommend players with forged irons do it a minimum of two times (once at the start and end of the season). If you're serious player, I'd check maybe a little more – especially if it gives you mental peace.

What is 2 degrees upright in an iron?

For example, if a 5 iron has a standard lie angle of 62 degrees, but you either custom order it or have it adjusted to be a lie angle of 64 degrees, then it would be considered to be 2 degrees upright.

How do you read a lie angle tape?

The mark on the lie tape is on the toe side of the head. The mark also indicates that the golfer is closing the face at impact. The information tells the fitter that the lie was too flat for the golfer and if the swing was perfect, the ball will drift to the right.

What is the standard lie of a 7 iron?

62.5 degreesWhat Is The Standard Lie Angle For A 7 Iron? Most golf club manufacturers 7 iron lie angles are 62.5 degrees.

What happens if lie angle is too upright?

If your lie angle is too upright, typically meaning that it's closer to 90 degrees than 0 degrees, then that means you will typically hit the ground with your club with the heel side of the sole.

Does upright lie promote a draw?

The upright lie also promotes a left tilting spin axis, which leads to what's generally described as draw spin. An upright lie angle basically gives you a head start, but depending on the severity of the slice conditions the golfer generates, it certainly won't guarantee a draw.

How do you measure iron lofts at home?

How to Measure Golf Club Loft Angle (Step-by-Step)Collect Tools.Set Up a Flat Surface.Put the Golf Club Shaft in Place.Make Sure the Clubface is Square.Read the Measurement.

Does changing loft change lie angle?

As you change the loft and the face angle, you will also change the lie unless there is a separate setting to alter the lie independently of loft.

How much does 1 degree of loft affect distance?

How Much Does 1 Degree of Loft Affect Distance? Given that you're at your maximum clubhead speed, just 1-degree change in the loft angle of a golf driver can affect your driving distance by 2-4 yards.

Why do you need to check the loft and lie?

Why Do You Need to Check Loft and Lie? The ultimate goal is to have the sole of your golf club perfectly parallel to the ground at impact. This means you have the right lie angle. If the toe of the club is too “in the air” at impact, it means the lie angle is too “upright” and you need the lie to be bent “flatter.”.

What is loft in golf?

Loft is the angle of the club face which influences the trajectory of the golf ball. In short, loft plays a huge part in controlling how far you hit each club. Lower lofts will go further and higher lofts will go shorter. Lie angle is pretty simple as well, but I’ll help clarify it. Think of the shaft of the the golf club and ...

Why do you bend the lie more upright?

If the heel is too in the air, then you guessed it, you need to bend the lie more upright because the lie angle is too flat. It’s worth noting that’s important to understand how the sole of the club is at impact, not at address. How the club is sitting at address really doesn’t physically mean anything. Theoretically, an incorrect lie angle could ...

How often should I check my loft?

It’s possible your loft has changed. At the very least, you should check your loft and lie at least once a season. I’d recommend players with forged irons do it a minimum of two times (once at the start and end of the season). If you’re serious player, I’d check maybe a little more – especially if it gives you mental peace.

Is each club manufacturer's standard?

That’s not true. Each club manufacturer builds their club to their own “standard” and it can vary from brand to brand. Admittedly they will be close, but it’s important to be aware that they can differ. Most importantly, you should work with a good fitter to make sure you know the correct lofts and lies for your swing.

How to play golf with confidence?

ADVERTISEMENT. The loft gaps between each iron are put in place to ensure you can swing smooth and hit a specific number. Shift the loft a couple of degrees in either direction and you’re suddenly struggling to hit certain yardages.

Do iron heads move more with regular use?

Depending on how often you play, iron head material — softer forged carbon steels will move more with regular use — and course conditions (firm versus soft), you very well could benefit from getting the lofts checked on your clubs more regularly to ensure everything is where it should be. News. Golf and the coronavirus: how to play ...

Did Max Homa inspect his gear?

And if you’re still scoffing at the importance of loft and lie angle checks, use Max Homa’s 2017 PGA Tour season as a cautionary tale. Homa was never one to inspect his gear and rarely frequented the equipment truck during tournament weeks.

What is a lie angle?

Before starting measurements, we should know what is the lie angle for irons?

How to determine lie angle for irons

Usually, the lie angle is measured along the path of the shaft plane towards the horizontal face plane. That influences the ball’s direction.

Final Verdict

It’s time to wrap up the content. The lie angle has a great impact on distance and speed. Also, it needed to adjust with their particular swing style and determine the initial direction of each shot.

mwilkins25

I’m looking for an inexpensive tool to measure loft and lie on my irons.

mwilkins25

The protractor is what you use to measure the loft after the club has been mounted in the loft/lie gauge. e.g. one of these.

Socrates

Found this on the golfmechanix site. Tried to link it here but it wouldn’t work.

mwilkins25

This will work, but you have to know how to make measurements and how to set the club up properly in the device to be accurate.

Socrates

What makes this one more difficult to use vs the more expensive one? I’m less worried about getting the exact loft, what I need is to be consistent across all of my clubs.

mwilkins25

You bought a launch monitor but don’t want a loft lie gauge yet want to know your lofts. You should have started with the gauge and worried about the launch monitor later.

Petem

Find a club that you definitely know the loft of. Place the face onto a flat surface like a table top or worktop with the hosel right up to the edge. If you have a work bench you could clamp the head face down. Measure the shaft just below the ferrule with a phone or digital inclnometer. What ever the difference is apply that to every other club.

What is lie angle?

Lie angle is the angle of the center of the golf club’s shaft and the ground as you place your golf club to address the ball. Golfers with the correct lie angle will notice that the sole of the golf club will rest square to the ground when they put the club behind the ball.

How does lie angle work?

Having a poor lie angle can cause the shot to be hit as a hook or a slice, meaning the ball will travel to the left of the target, or the right of the target, as opposed to in a straight line.

Can 1 degree make a difference?

So you must be wondering whether your lie angle has to be way off the mark, or just slightly out of tune, right? Well, the simple answer is that for every 1 degree that your golf club is out of lie, it can cause your shot to go four yards off target, meaning that if your lie is just 3 degrees off, your shot could be up to 12 yards off target!

What Is Lie Adjustment For Golf Irons – Summary

To sum up, what we have discovered in this article, lie angle can have a huge impact on a golfer’s performance out on the golf course, a lie angle that is just one degree out of tune can result in the golfer hitting a shot that is up to four yards off target! To help improve your lie angle, make sure that your clubs are well fitted to both your posture and your swing..

What is the loft of a golf club?

Each golf club in your bag should have a different loft. A golf club’s loft – the angle of the clubface relative to the shaft – helps determine how high you’ll hit the ball. All else being equal, you’ll hit the ball higher with a higher-lofted club, although the more loft a club has, the more distance that is sacrificed.

Can you check the loft of a golf club?

Additionally, standard lofts have changed a bit over time. If you want to check the loft of your clubs, or perhaps you wish to buy a used club and the owner doesn’t know its loft, you can check it yourself with the proper tool.

How often should you check your golf club lie angle?

So you should always check you lie angle first on your iron and wedges. We recommend getting checked at least once a year but could be more frequent when going through swing changes or club changes. Here is how a lie fitting procedure usually goes: Choose a club head that you like to play.

Why is a lie angle important in golf?

Lie angle is the most important component in irons and wedges that will determine how well you hit and how fast you will improve your game.

How to tell if you have an incorrect lie angle?

Symptoms of incorrect lie angle: Let’s say the green mark is where you see your wear mark on the sole of your irons or wedges. Lie is too flat or you are closing your face too much. A good club fitter will be able to tell you if it is a lie issue or a over rotation of the club head during the swing. When you see the wear mark on the heel, the lie ...

What happens when you practice with a wrong lie angle?

When you are practicing with a wrong lie angle, you end of getting use to bad habits. If irons are too flat, ball should go high right but when you practice hard to make it go straighter, you compensate for the incorrect lie by shutting the face to make it go straighter but not very efficient ball striking. When you have a proper lie, your ball ...

What does it mean when you see a wear mark on your heel?

When you see the wear mark on the heel, the lie angle is too upright. In both cases (toe and heel) you are not getting the nice feel when you get when you hit the sweet spot (unless the ball is teed up, sitting up on the grass or hitting from a ball above or below your feet.)

What happens if you lie too upright?

Basic theory: If lie is too upright, ball will go left (for righthanded golfers ) and if lie is too flat, ball will go right. Golfers who have never checked his/her lie angle goes out to practice and work on compensating with their swing for the incorrect lie angle. (i.e.

Can you hit the ball left or right?

You may still hit the ball left or right but now you can focus on your swing since it is now the swing (or other parts of the club like shaft and grip) that may influence ball flight. Always blame the club spec first and if all looks good, it is your swing.

Kuuuch

Apologies if this has been discussed I'm not too up to date on this type of stuff. But the GM at golfsmith said with my irons MP-4 and as much as I practice (5 times a week) I should be getting my lofts and lies checked 6 times a year. This sounded a little extreme but how often do you guys do it?

Kuuuch

If they are forged then they certainly can move. Certainly your decision as you know how much and how hard you play. If your confidence is down, then get them checked. As you build a bit of history you will be able to understand how often you need to actually make corrections - required to keep them optimal.

Kuuuch

Wow that seems excessive. I've heard when you change your grips. Which for many is 1 or 2 times a year.

FairwaysToHeaven

do most places charge to simply check even if they don't have to make changes.

Boricua Golf

I normally check them once a year, right before my first round of the season, then I just play, I get to play about 2-3 times a month with parctive about 1-2 times a week, I don't beat them up too bad, so they stay fairly set for the entire year, for the last few years they have not changed at all (lie and loft)...

Kuuuch

do most places charge to simply check even if they don't have to make changes.

masamitsu

I usually get them checked before the season starts. Was surprised this year as my lofts were 2-3 degree weak according to Mizuno standards.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9