Measure from the end of the grip to the end of the sole. Use a tape measure to find the length in inches between the end of the grip and the farthest point that the sole contacts the horizontal surface. This is the length of your golf club!
Full Answer
How are golf clubs measured?
Measuring golf clubs might seem like a complicated task, but it’s actually pretty simple. You can measure the clubs yourself with a tape measure, or use a golf club measurement apparatus to determine if the clubs conform to length standards. Place the club on a flat, horizontal surface.
What are the different irons in golf?
Irons are divided into three sets; long irons (2, 3 and 4-irons), mid-irons (5, 6 and 7-irons) and short irons (8 and 9-irons, plus the pitching wedge). Long irons are used to hit the ball further with a shorter loft, while the short irons are designed to produce a higher loft.
What size golf clubs do I Need?
There are two measurements that you need to take before shopping for a golf club. The first one is your height. Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance.
What is an angle iron in golf?
The angle iron forms a 60-degree angle from the horizontal, and it is also used to stop /hold the iron. In this method, the golf club is measured to the very end of the grip cap, leading to an increase in about 1/8 inch or more length.
How do I know what loft My irons are?
0:263:40Checking Your Lofts and Lie Angles - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then our lie angle is coming in at about 59 degrees so you're looking at about two and a halfMoreAnd then our lie angle is coming in at about 59 degrees so you're looking at about two and a half degrees flat and one degree strong that could be based on specs these are the read spec for callaway.
How do you tell what size my golf clubs are?
Here's how to go about it to get the correct golf club length for your height…...1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″6'4″ to 6'6″plus 1″7 more rows
How do you read golf club specs?
Generally speaking, the following clubs are used in the following shot range:Driver = 230 yards.3-wood = 210 yards.2-iron/4-wood = 190 yards.3-iron/5-wood = 180 yards.4-iron = 170 yards.5-iron = 160 yards.6-iron = 150 yards.7-iron = 140 yards.More items...
How do you check club lofts?
The loft, is the angle between the face plane and the vertical plane the shaft is in, when the club is in the normal address position and the grooves are horizontal. Once you set up the club as described, use a protractor to measure the angle between the face plane (at 90 degrees to the grooves) and the vertical.
What is the standard length of a 7 iron?
What is the Standard Length of a 7 Iron? The standard length of a 7 iron is 37 inches on steel and 37.5 inches with the structure made of graphite. For women, the standard length of a graphite golf club is 36.5 inches, and for steel, it is 36 inches. The standard lengths are set from the shaft weights of the golf club.
How long should my golf clubs be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
How far should I be hitting a 6-iron?
You should hit a six iron about 150 yards. The average golfer gets just over 150 yards with their six-iron. Players with faster swing speed will get closer to 165 or even 170 with a six iron.
What does G mean on a golf club?
A “GW” is an important club known as the gap wedge. As the name implies, it fills in the large distance gap found between your pitching wedge (PW) and sand wedge (SW), which occurs because of the large difference in the lofts of those two clubs.
What does W mean on a golf club?
The term "pitching wedge" is now used by virtually all manufacturers and players to describe this club; Karsten Manufacturing (maker of the PING brand) simply labels their pitching wedges "W" for "wedge".
Can you adjust loft on irons?
You can bend a club more than 2 degrees. The 2-degree limit is only recommended when changing the lofts on irons due to the potential effect such bends will have on the sole angle of the club.
How is club angle measured?
The specification gauge disciples in the golf industry have long advocated the only way to measure club angles is by placing the club head on its sole center (defined by the middle of the score lines) on the base of the specification gauge.
What is loft adjustment for golf irons?
Lower loft is closer to vertical, higher loft is closer to horizontal. Higher loft means the clubface is pointing more upward, so the ball goes up and down more sharply. So loft gives you an idea of how far the ball will go and the type of trajectory the shot will have.
How to determine the correct size golf club for beginners?
The correct golf club size starts with the golfer’s height and wrist-to-floor measurement.
How to adjust golf clubs?
If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them . If you don’t have the tools to do this yourself, there are typically local golf club repair shops that offer these services.
What factors affect the size of a golf club?
Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.
What is custom fitting golf?
Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that you can get the clubface to match up to the ball each and every time you swing. The more accurate your club sizes are, the better the chance you have of scoring and performing. Even though custom golf fittings can be expensive, most golfers find them to be very well worth the pricing.
Why do manufacturers make golf tables?
Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.
What is the difference between men's and women's golf clubs?
The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.
How tall is a golf club?
Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.
