Golf-FAQ.com

how to check voltage regulator on a yamaha golf cart

by Dr. Tito Cummings Published 2 years ago Updated 1 year ago
image

Testing the voltage regulator on a gas Yamaha golf cart

  • Remove the drive belt from the golf cart. You can also consider turning off the engine of the cart so that there is no movement.
  • As mentioned above, connect the voltmeter to the battery and check the voltage reading. If it’s above 15 volts, it’s a sign of overcharging.
  • Release the pedal and check if the reading is 12.5 volts or just above this value. If it’s not so, the voltage regulator may be at fault.
  • Alternatively, if the above battery voltage in Step 2 is less than 13.5 volts, ground the yellow wire present on the starter generator to the chassis.
  • If the voltage reading increases to 17 volts or 18 volts, it indicates a faulty voltage regulator.

Testing the voltage regulator on a gas Yamaha golf cart
  1. Remove the drive belt from the golf cart. ...
  2. As mentioned above, connect the voltmeter to the battery and check the voltage reading. ...
  3. Release the pedal and check if the reading is 12.5 volts or just above this value.

Full Answer

How to test a golf cart voltage regulator?

You can follow the steps given below to test the voltage regulator of your gas club car. Connect the voltmeter to the battery and get the golf cart running. You can consider applying the hand brake to prevent rolling.

What should the voltage be on a golf cart starter generator?

If the voltmeter reading is between 14 to 16 volts without pressing the forward pedal, then there is no problem with the voltage reducer. If the above reading is below 14 volts, stop the golf cart and remove the wire connection above the starter generator. Connect the stud of the starter generator to a jumper and check the readings.

How to install a voltage reducer on a golf cart?

The steps given below to install the voltage reducer of a golf cart will give you an explanation of its wiring diagram. Place the voltage reducer on a solid metal frame. Use only metal frames and avoid plastic because of the heat dissipation capability of the regulator. Maintain a clearance of two inches from nearby components.

How to test the starter/generator and the voltage regulator?

In order to test the function of the Starter/Generator and the Voltage Regulator, the wire attached to DF can be removed and while a meter is used to monitor the voltage B+, DF can be shorted to ground (with a jumper) with the motor running.

image

Where is the voltage regulator on a Yamaha golf cart?

0:312:28Yamaha Voltage Regulator | How to Install on Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow I'll go underneath the seat. With a ten million ten millimeter socket. It's a unbolt. It.MoreNow I'll go underneath the seat. With a ten million ten millimeter socket. It's a unbolt. It.

How do I know if my voltage regulator is going out?

Another way you can tell the voltage regulator is bad is when the car lights keep dimming or flickering. After all, the voltage regulator is supposed to keep the power flowing to the lights, so it's no surprise that those lights don't work right anymore once this part goes bad.

What does a voltage regulator do on a gas golf cart?

The voltage regulator is responsible for limiting or regulating the amount of power sent back to the battery for recharge. When your golf cart is started, the starter generator acts as a starter motor to start the engine to spin.

How do you check the voltage lower on a golf cart?

Once the new voltage regulator is installed, it is time to test whether it is running correctly. Use a voltmeter and connect it to the terminals of the battery. The reading should be 12.6 volts, provided that there is no spin. Then, press the acceleration pedal on the golf cart.

How do I test a voltage regulator with a multimeter?

0:232:18How to Test a Car Voltage Regulator - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what you do is you put your multimeter clamps directly on the battery. Terminals. Positive redMoreAnd what you do is you put your multimeter clamps directly on the battery. Terminals. Positive red to positive and black to negative. And you set it to voltage.

What are the symptoms of a faulty regulator rectifier?

Key Signs to Look For You won't have any trouble diagnosing the faulty regulator rectifier if the battery is the cause. You'll note signs right away like poor starts, fluctuating meter readings, and dimmed headlights. around 13 volts, the bike will start to drain the battery.

How do I know if my voltage regulator is bad on my golf cart?

Use a jumper and connect it from the ground of the cart to the stud of the starter generator. If the voltage is 15VDC or more, then the voltage regulator is faulty.

Where is the voltage regulator located?

On most vehicles, the voltage regulator is either located inside of the alternator or mounted to it. But vintage vehicles often have an external voltage regulator, which may be mounted to the fender well, firewall, etc. It's also important to note that some modern vehicles do not have a voltage regulator at all.

What charges the battery in a gas golf cart?

Gas golf cart accessories will also rely on battery power. However, they feature a starter/generator that will charge the battery on its own while the gas pedal is depressed. This doesn't mean a gas golf cart battery is invincible – any accessories left on while the cart isn't running will eventually kill your battery.

How do you hook up a voltage reducer on a Yamaha golf cart?

0:553:33LEDGlow | How To Install A Voltage Reducer On An Electric Golf CartYouTubeStart of suggested clipEnd of suggested clipUse double-sided adhesive to mount the reducer to the location you just clean. The voltage reducerMoreUse double-sided adhesive to mount the reducer to the location you just clean. The voltage reducer has two sets of wires. The input wires will be connected to the golf cart battery.

How do you check a golf cart alternator?

0:011:03How to Check the Generator on Your Golf Cart - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you should see the voltage jump up from around 12 volts with the cart running to about 16 voltsMoreAnd you should see the voltage jump up from around 12 volts with the cart running to about 16 volts that that happens that proves the generator is fine you simply need to change.

Why are my lights dim on my golf cart?

In most cases, lights dimming when you accelerate your cart is likely down to wiring issues that make your cart struggle to run properly. For example, if your battery is not properly charging due to disconnected wires on your battery, accelerating may cause a drain that can dim your lights.

How much voltage should be used on a club car golf cart?

Testing the voltage reducer on a gas Club Car golf cart. The voltage should not increase more than 14.5V when accelerating the Club Car golf cart since this is important for maintaining a long life for the battery. The voltage reducer ensures the same.

What to do if your golf cart voltage reducer is below 14 volts?

If the above reading is below 14 volts, stop the golf cart and remove the wire connection above the starter generator.

Why is my golf cart battery burning out?

A faulty voltage reducer causes problems with the motor of your cart. Furthermore, it can lead to other problems such as overcharging of electrical components, which results in them burning out. Moreover, a faulty voltage reducer prevents a golf cart battery from retaining its charge.

Why use voltage reducer on golf cart?

When the battery charges, it helps to regulate and control the power sent to the battery. If the battery sends out a high power output, the reducer limits the output.

What does 12V mean on a golf cart?

If this reading is 12V, then it means that the battery is in good condition. Accelerate the golf cart and recheck the voltmeter reading. Ideally, it should show a reading between 14 to 16V. But if it still shows 12V, then there is a problem with the battery, and the reducer isn’t functioning correctly.

What is a voltage reducer?

A voltage reducer is a device that reduces the voltage of an electric current. Converts the voltage of an alternating current (AC) source to a lower, more suitable level. Voltage reducers are often used with small motors and like power tools, and golf carts.

How many volts does a golf cart use?

A typical golf cart will have a 48-volt or a 36-volt battery to power the golf cart’s lights and other electric accessories. The radio, CD, and tape players require only about 13.7 to 13.9 volts, which is reduced from 24, 36, or 48 volts by the voltage reducer.

How many volts does a golf cart have?

There is a major difference between 36 volt up to 48 volt systems, impacting both performance and potential upkeep and maintenance costs. Hint: some batteries are much more expensive ...

What is the amperage of a golf cart?

Golf Cart Battery Amps. Amperage can be considered akin to the fuel in a gas-powered engine. Similar to a tank of gas, the amount of amperage will dictate how far you can drive your cart on a single electric charge.

What does voltage mean in a battery pack?

Voltage represents how much power your system will be delivered, resulting in increased ability to tow, carry more weight, and accelerate faster.

Does a golf cart battery need to be recharged?

In this regard, a higher voltage (although more powerful) often comes at a cost. That cost is that it can burn through more amps faster, draining the golf cart battery quicker, and requiring you to recharge more frequently.

How many volts should a starter generator output?

It should peak at about 15 volts (the maximum output of the Starter/Generator’s charge ability). If it does increase, then the Starter/Generator is alright. If it doesn’t, there is a problem with the Starter/Generator.

How many volts should a jumper have before it is shorted?

Before the jumper is shorted to ground, the voltage at B+ should, of course, reflect the charge state of the battery (around 12 volts), but when the jumper is touched to ground (which is what the Voltage Regulator does in instantaneous bursts), the voltage at B+ should rise as the motor’s speed is increased.

What happens when a starter generator spins?

That completes the circuit, so the Starter/Generator begins to spin. As it spins, a voltage appears at the DF terminal of the Starter/Generator, which is connected to the Voltage Regulator.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9