How hard is it to replace the starter on a C-class?
The C-Class is the most difficult of all the other models because there is very little room in the engine bay. Once you remove the starter from the engine block most mechanics and also the Mercedes-Benz dealer remove the exhaust to get the starter out.
How hard is it to replace a starter on a Mercedes-Benz?
If you have a Mercedes-Benz with the V6 or V8 engines these instructions will help you. The C-Class is the most difficult of all the other models because there is very little room in the engine bay. Once you remove the starter from the engine block most mechanics and also the Mercedes-Benz dealer remove the exhaust to get the starter out.
How to replace the starter on a Toyota Corolla?
You can remove the engine mount on the passenger side wich will give you room to remove the old starter and install the new one. On other models such as the S and E class, you may have enough room to pull out the starter without going through this trouble. To remove the engine mount you will need stubby ratcheting wrench like the ones shown below.
What kind of Fuse do you replace when the starter blows?
The fuse is a 15 amp fuse and you can replace it with a 20 amp fuse which may solve the problem. If the 20 amp fuse burns / blows as well you need to troubleshoot the starter which was the problem in this case. If you are stranded in a middle of a desert and suspect that your starter is the problem we have a tip for you.
How can I test my starter without removing it?
The easiest way to check the starter on the vehicle is to use jumper cables to bypass the vehicle's electrical system. With the ignition turned off and the transmission in "park" -- and with all due care -- connect one end of the red/positive jumper cable to the positive terminal of the battery.
How do you test a golf starter?
6:1721:18How to test, fix or replace starter motor VW Golf Mk4 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you try to start the engine and you can see a light coming out so you know the signal. ComesMoreAnd you try to start the engine and you can see a light coming out so you know the signal. Comes from the ignition key. So that's the last thing to check.
How do you diagnose a starter problem?
How do you troubleshoot starter problems?Look under the hood. Check the battery and battery cables to see whether everything's in working order. ... Tap the starter. Try lightly tapping the starter a few times with a hard object, making sure not to pound it. ... Adjust the transmission. ... Check the fuel gauge.
How do you test a starter to see if it's good?
9:5814:58How to Test and Troubleshoot a Starter Problem - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe positive cable goes on its starter. Then we're to crank the engine the positive side crankingMoreThe positive cable goes on its starter. Then we're to crank the engine the positive side cranking test you don't want to see any more than 0.7 volts here. So if you see more than 0.7 volts here then.
How do you test a starter with a screwdriver?
0:535:14How To Test A Car Starter With A Screwdriver And Jumper Cables!YouTubeStart of suggested clipEnd of suggested clipAnd what you want to do is you want to jump this to the s part of the small stud. Okay now once youMoreAnd what you want to do is you want to jump this to the s part of the small stud. Okay now once you do this you're activating a solenoid and a starter. And you should see the gear pop out and spin.
How do you test a starter on a car?
1:524:40How to Test Your Car's Starter and Solenoid Assembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou put one on them two single posts. And then you just touch your jumper cables. If you have a goodMoreYou put one on them two single posts. And then you just touch your jumper cables. If you have a good working starter motor and solenoid this gear will come out and spin.
How do I know if my starter on my car is bad?
Still, look for these seven symptoms that your starter is going bad.#1: Engine Won't Turn Over. ... #2: Noise - Clicking, Grinding, or Whirring. ... #3: Intermittent Issues Starting the Vehicle. ... #4: Starter Stays On After Starting. ... #5: Smoke. ... #6: Starter Engages But Motor Won't Start. ... #7: Battery.
How do you start a car with a bad starter motor?
Jump-Start Your Car Providing enough amps to the starter can help it function normally, which in turn, will crank up the engine. To jump-start a car, you can either use another car's battery and jumper cables or use a portable jump starter.
How do you tell if it's your starter or ignition switch?
Test the Starter It is under the hood, usually on the passenger side at the bottom of the motor next to the transmission. The ignition switch is a set of electrical contacts that activates the starter and usually is located on the steering column.
How do I know if my starter has power?
4:005:20My Car Wont Turn Over - How To Test The Starter / NSS / Ignition SwitchYouTubeStart of suggested clipEnd of suggested clipAll right just to recap the first thing that you want to do is check your battery. You need to haveMoreAll right just to recap the first thing that you want to do is check your battery. You need to have 12 and a half volts or higher if you don't that's probably your issue.
Why is my car not starting but the battery isn't dead?
Similar to the starter engine, a broken or damaged ignition switch can stop your car from starting. If your headlights can turn on, but your car won't crank, that means that your battery is charged, but either the starter or ignition is the problem.
How do you bench test a starter at home?
0:062:41How to Bench Test a Starter - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne will fit into the starter solenoid and the other is a switch to turn it on and off during theMoreOne will fit into the starter solenoid and the other is a switch to turn it on and off during the testing. And then the other one goes on the large stud on the starter the B+ or battery plus stud.
The replacement of the starter on the GTI Mark 4 involves working both below the car as well as in the engine compartment
If you car has the under trays removing the left side shield will make the job easier.
Project Photos
Figure 1 Begin by disconnecting the ground strap from the terminal on the battery (yellow arrow) and making sure it cannot accidentally come in contact with it while you are working on the car.
Parts Needed
You will need a new starter which you can buy online at a fraction of the dealer cost or even the retail parts store. In our case we bought this starter on Amazon. It was on sale for less than $100, see link here.
Tools Needed
We assume you already have a set of tools, wrenches, and screwdrivers. To complete this job, you also need to make sure you have these tools.
Step by Step Instructions on how to replace the starter in a Mercedes-Benz with Pictures
Open the hood and locate the battery under the cabin air filter. Tip: It is located on the passenger side.
