Golf-FAQ.com

how to ckeck to change gear on golf cart with kawasaki engine

by Kelli Kunze Published 3 years ago Updated 2 years ago

Check the underside of your golf cart. The differential housing is placed in the center position. You will find the rear differential in the center of the rear axle. Find the fluid check plug at the rear center in the differential housing.

Full Answer

How to change the oil in a golf cart?

You first need to park your golf cart on a flat surface. Turn the engine of the golf cart off. Remove the oil cap located that is usually on the top of the engine.It is of a round shape. Place the oil cap in a safe place. Remove the dipstick that is located on the driver’s side. Clean the dipstick by wiping it with a clean cloth or rag.

How do golf carts go in reverse?

The reverse switch is found below the driver’s seat, and can be activated by pulling the handle left or right. Once pulled, the golf cart will start moving in reverse. Golf carts are based on electric motors. They are explicitly designed to be eco-friendly as they do not run on gasoline that would release toxins into the environment.

Why won’t my golf cart move when I push it?

Another commonly found issue can be with the circuits. You can find out which circuit is defected through the solenoid. If it clicks, but the cart doesn’t move when the pedal is pushed, the issue is with the high current circuit. It the solenoid doesn’t click; the trouble can be in the solenoid activation circuit.

How to start a golf cart with a key?

After placing the key in the ignition, get the cart turned to ‘on’ position. Since the golf cart does not run on motor machinery so you can get it going with a gentle turn of your wrist, you must not wait for any sounds to be sure that your golf cart is running, just ensure that ignition is turned to ‘on’ position.

How do you change gears on a golf cart?

3:1118:56How to Increase Your Golf Cart Speed - Gear Upgrade Install - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can start to do it going back and forth finding just a little bit and you'll eventually get itMoreYou can start to do it going back and forth finding just a little bit and you'll eventually get it loosened. To where you can just grab the gear. It is fairly heavy.

Why wont my golf cart go forward or reverse?

Check the Forward/Reverse switch of your golf cart for loose connections. If the connections are intact, interchange the top and bottom wires at the rear. If the cart now goes in reverse but not forward, the problem is with the switch. You have to just change the switch in this case.

How do you test a golf cart switch?

Testing a Club Car Ignition SwitchFind the back and red wires on the back of your battery pack.Connect the black wire to the negative terminal and the red to the positive.Keep the cart turned off while you work on it.Check the wires with a probe meter while the cart is off – only one wire should have a charge.More items...

How do I test my golf cart speed controller?

How to Test a Club Car Golf Cart Speed Controller? The simplest test to ascertain your golf cart controller's performance is to to watch whether it runs when the batteries are fully charged with a slight push of the pedal. If you hear a distinct clicking noise, then your golf cart is running correctly.

What causes a golf cart not to move?

Solenoid Wear When there is a disruption in the flow of the electrical current, your cart will not operate. A common reason for current disruption is solenoid wear. Each time the solenoid activates as you press down on the gas pedal, the solenoid compounds down onto a thin metal contact plate.

Why does my golf cart click but not move?

A Club Car golf cart can start clicking but not move, due to dust accumulating inside the battery ports. Opening the battery ports and checking whether there is any dust accumulation can tell you if this is the case. Cleaning it thoroughly with a cloth can resolve the problem.

How do you use a multimeter to check a key switch?

Ignition Power Supply Disconnect the cable and turn the ignition key to the On position. Set the multimeter to 20 volts DC, ground the black wire while probing the power supply with the other. If you get a voltage reading, it means that the ignition is receiving power.

Where is the reset button on a Club Car golf cart?

It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again.

Where is the micro switch on golf cart?

In a golf cart, you're going to find a large number of these switches throughout its build. For example, there is a micro switch located on the accelerator pedal. This switch activates when you push the pedal and sends a signal to the solenoid.

How do I know if my golf cart controller is bad?

X Common Symptoms of Controller FailureTop Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. ... Sudden and Unexpected Slowing. ... Shuttering or Shaky Driving. ... Stalling Out and Refusing to Start. ... Surges in Speed When Driving.

What does the controller do on a golf cart?

The controller meters out current and voltage on your battery based on user input, whether that be a gas pedal, a throttle, or even pedals on a bicycle. With the controller you are able to control your acceleration and deceleration, as well as the speed at which your vehicle moves.

How do you reset a golf cart motor?

First, you'll want to reset your motor. It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again. If it starts up then you're in luck!

How to get a golf cart to idle?

Thread the throttle cable back in place from the gas pedal to the throttle valve body on the engine. Push the throttle cable toward the throttle valve body on the engine from the gas pedal position. Screw the throttle cable back in place on both the gas pedal and the throttle valve body on the engine. The golf cart will idle rather than shut off.

What is the safety feature of a golf cart?

One of the safety features on a golf cart is cutting out the engine when the gas pedal is not in use. Many golf enthusiasts understand the importance of this safety feature. However, those who use a golf cart for purposes other than golfing may view it as unimportant.

What is a relay on a golf cart?

The relay on the throttle valve is a safety feature in place to prevent accidents. Use care and be aware of your surroundings. Any change in the manufacturer specifications on the golf cart can invalidate any warranty given at the time of purchase.

Where is the throttle cable on a golf cart?

Find the throttle cable on the golf cart. The throttle cable runs from the gas pedal to the throttle valve on the engine. Lift the seat to find the throttle cable.

Do security guards need to shut off the engine?

Security guards at airports who shuttle passengers back and forth, for example, have no need to have the engine shut off. Having the golf cart idle makes their job faster and easier. Remove the speed governor to shut this safety feature off on a golf cart.

Why is my golf cart only going in reverse?

Golf cart only goes in reverse. If your golf cart is only moving in reverse, there could be an issue with the contacts in the forward and reverse switch. This can be checked by swapping the two wires present in the swivel terminals in the center. The micro-switch present at the FR knob might be preventing the golf cart from going in ...

Why won't my golf cart move forward?

There might be several reasons why a golf cart won’t move in forward or reverse. The most likely reason is incorrect wiring or a faulty accelerator. If you’re mechanically experienced, you can attempt to use the tips below to fix the problem yourself. I have outlined the most likely causes and steps to fix this below:

How to check if micro switches are working?

First, get the forward and reverse switch in a neutral state. This is followed by disconnecting the micro switches, both forward and reverse. Use an ohmmeter to check the micro switches as you move them in forward and reverse position. If the switches are working perfectly, put them in back in place.

Why is my golf cart not rolling?

If the golf cart is not rolling across freely, there might be an issue with the brakes. Inspect the brakes and rear ends and check out for any seizing up. There can also be an issue with the controller. Make sure that you have new batteries inserted in the golf cart and that they are not drained.

Do golf carts run on gasoline?

Once pulled, the golf cart will start moving in reverse. Golf carts are based on electric motors. They are explicitly designed to be eco-friendly as they do not run on gasoline that would release toxins into the environment. There is no considerable difference between the mechanics of cars and golf carts.

Do you put a seat belt on a golf cart?

As a precautionary measure, it is always good to put on your seat belt even though golf carts do not go up to a very high speed. Next up, you need to get your golf cart in gear that can either be ‘forward’ or ‘backward.’. This may, however, vary from cart to cart. Make sure that you lock the lever before proceeding any further.

Can you hear a pop on a golf cart?

You can hear a slight pop when doing so. You might have a sudden jolt since golf carts start working at their full power, so be prepared for that. Since golf carts are light and small in size, they carry a high possibility of easily toppling over. So, make sure you keep you speed minimum, especially when turning.

How to park a golf cart?

You first need to park your golf cart on a flat surface. Turn the engine of the golf cart off. Remove the oil cap located that is usually on the top of the engine.It is of a round shape. Place the oil cap in a safe place. Remove the dipstick that is located on the driver’s side.

When to change oil on a golf cart?

The best time to change the oil is when the engine is still warm. The next step is to part your golf cart on a plane level. Turn the engine on and let it warm up for a while and then turn it off. Apply the brakes after you have turned off the engine.

How to remove oil filter from a cart?

Secure your cart with a block of wood or a floor jack. While the oil drains, remove the oil filter. Make sure to place the pan in front of the oil filter and the drain hole. Put the plug back to its place and place it firmly after the oil drains out completely. Now, take the new oil filter and put it on tightly.

How often should a golf cart starter be checked?

The engine of a gasoline-powered golf cart must be checked on a monthly level. After the first hundred hours of use of the golf cart, the filter and the engine oil must be changed.

What kind of engine does a golf cart have?

Club car golf carts are equipped with two kinds of engines. It is either equipped with an electric engine or a gasoline engine. A club car which is powered by a gasoline engine should be checked frequently and be handled just like any regular car. The oil should also be changed at proper intervals.

How to change oil in a car?

You can change the oil easily by placing a funnel in the engine cap hole. Add the oil by passing it through the funnel into the engine. After you have added the oil, remove the funnel and put the cap back on properly. Start the engine and run it for about a minute.

How to get an O ring out of an engine?

While doing so, make sure that the o-ring remains in its place. Put the oil filter in a drip pan and let the oil drain out from the engine completely . Get a new oil filter for your engine and make sure that an o-ring is attached to the top of it.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9