Here’s how to clean your irons and wedges:
- Dip the iron club head in your bucket of warm water and soap.
- Wash the head and face of the club with your brush, focusing on the grooves.
- Wipe off the dirt using a towel.
- Dip the iron back in your water to rinse it off.
- Dry the club off using your towel.
- Repeat these steps if the club is still dirty.
How do I Clean my irons and wedges?
Be careful you don't run the water too hot, as you could risk loosening the ferrules, which join the shafts to the heads. Set the bucket down (ideally outside if possible) and place your irons and wedges in with the clubheads submerged and allow them to soak in the warm water for a few minutes to loosen any dirt in the grooves.
What is the best way to clean a golf club?
Soap and Water This can be a good place to start for most clubs. With a simple mixture of soap and water, you do not need to worry about damaging the club. After a brief soak, use a small brush like a toothbrush to try and remove any rust.
How to clean golf clubs with WD40?
That’s why golf club manufacturers recommend just brushing with soap water. After washing, dry off the grip, shaft, and head with the help of a clean, dry towel. You can use suitable wood or metal polish for making your golf clubs shine like they’re brand new. Or cleaning golf clubs with WD40 is also an option.
How do you restore a wedge to its original performance?
This is the best way to restore a wedge to its original performance. However, it relies on slightly increasing the size of the grooves each time and can only be done o many times. Groove sharpeners are available for sale in many golf shops and online. These tools can sharpen the edges of your grooves.
How do I clean my golf iron face?
0:211:53How to Clean and Store Your Golf Clubs - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your first Club. And dunk the head in the bucket of water for a few seconds remove. It and wipeMoreTake your first Club. And dunk the head in the bucket of water for a few seconds remove. It and wipe it off with the towel. Make sure all the debris has been removed from the grooves cleaning.
What is the best thing to clean golf clubs with?
Mix warm water and 2 teaspoons of dishwashing liquid or soap into a bowl or a bucket (depending on how many clubs you need to clean). Dip your soft-bristle brush or toothbrush into the mixture and carefully scrub your club head, making sure that it doesn't get too wet.
Is Dawn dish soap safe for golf clubs?
Cleaning your clubs can be a two-step process. Start with the clubheads, and then clean the shaft and grips. To properly clean the head of your golf clubs: Fill the bucket with lukewarm water and a small amount of dish soap.
How do you clean golf clubs without damaging them?
To clean your grips and prolong their life, you can simply wipe them down with a damp cloth after you play. Make sure that the cloth isn't too hot as this may damage the grip. For an even more thorough cleaning, you can dip a soft-bristle brush into warm soapy water and scrub the grip on all sides.
How do I make my golf clubs look new again?
Mixing up warm water and mild soap. Fill the bucket with a not-so-hot water. ... Submerge the club several times for 5 to 10 minutes. If your club is not that messy, you can submerge the golf club heads for just 5 minutes. ... Remove and scrub the clubheads. ... Apply steel of chrome polish.
Can you use WD40 to clean golf clubs?
Remove the golf clubs from the bag; if you spray WD40 on your bag, it will smell for a long time. Spray the WD40 on your irons and wedges and let it sit for a few minutes. Take a dry cloth and wipe the WD40 off the clubs. Once it is off, you can wash and rinse the clubs.
How do pros clean their clubs?
0:167:28How to clean your golf clubs I Tips & Tricks I Golf Monthly - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you've got that on your bag just get the worst of the dirt in and then of course work in thereMoreIf you've got that on your bag just get the worst of the dirt in and then of course work in there with the brush. And a little tool just to keep those grooves clean if you don't clean the grooves.
Can you use Windex on golf clubs?
Using Household Cleaners If you want to give your clubs a thorough cleaning after the warm water and soap, take a household cleaner like Windex and spray it on your grips. This will break up the dirt and oil below the surface and return the grips to almost-new condition.
Can I use Simple Green to clean my golf clubs?
Simple Green® Golf Grip Cleaner Its thick foam safely lifts dirt, sand, soil, grass and grime from clubs, grips, bags, shoes and other golf accessories.
Do Dirty golf clubs make a difference?
A dirty club face can cause a shot to start off line, impart an unwanted spin, and ultimately lead to higher than needed scores. With data supplied by FlightScope, let's examine the facts. Keeping Your golf Clubs Clean insures you have the absolute best chance of optimizing the ball flight of every shot.
Do wire brushes damage golf clubs?
A wire brush — particularly the kind you buy in a golf supply shop — is safe and won't scratch up the faces of your clubs. (It is advised not to use a wire brush on the top of the driver's head, as it could scour off the enamel.)
Should you soak golf clubs?
It is also worth cleaning them in a bucket as opposed to a sink as contact with the sink could leave a little mark. Once you've done this, make sure you wipe them clean with a dry cloth. Unlike your irons ands wedges, you shouldn't submerge these clubs in water.
How to clean golf clubs in a bag?
Run half of an old towel under warm water. Bring it outside. Use the wet end to clean each of the clubs in your bag and the other end to dry them.
How to clean a caddie yard?
Toss your clubs in a bucket filled with warm water. Snag a club-cleaning brush. Wet half a rag in the bucket and leave the other half dry. First, dunk a club in the water, then use the wet half of the rag to wipe the hosel, face and back.
How to clean rust off golf clubs?
A quick soak can easily loosen surface rust and allow your club to be cleaned using a brush.
What to put on golf clubs to prevent rusting?
Wax. This may sound strange but a thin coat of wax on a golf club can prevent it from rusting. Wax is obviously slippery, which makes it unwise to put on places where you want friction, like a wedge face. However, it is very helpful in protecting the finish on shafts and golf heads.
Can a Cobra wedge rust?
Cobra Trusty Rusty Wedge. Leaving you’re club outside or even storing it in unfavorable conditions can result in rust. Contrary to popular belief, a little rust is not the end of the world. For some used clubs, especially wedges, some rust may even be beneficial. Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase ...
Can steel wool be used on golf clubs?
Steel wool and wire brushes can be helpful in removing surface rust. However, used improperly these products can damage the surface of a golf club. Be sure to use a wire brush made of a material less strong than the material of your club. Likewise, starting off with ultra-fine steel wool will ensure you do not scratch or damage your clubs.
Does rust on a golf wedge increase spin?
Made famous by Cobra’s Trusty Rusty wedges, rust can actually increase the friction on the surface of a wedge and increase spin. If you are trying to make the clubs look newer, there can be several strategies for removing the rust that has built up.
How to clean golf clubs with WD40?
Here are the steps to follow to use WD40 to clean your clubs. Remove the golf clubs from the bag; if you spray WD40 on your bag, it will smell for a long time. Spray the WD40 on your irons and wedges and let it sit for a few minutes. Take a dry cloth and wipe the WD40 off the clubs.
Why do you need to clean your golf clubs?
The largest benefit of cleaning your clubs is that it will make for much better contact between the ball and the club. The grooves on your golf club and the dimples on the ball need to interact with each other to get the proper ball flight and response out of your shot.
What is the hardest club to clean?
Of all the clubs in your golf bag, the irons and wedges are going to be the most difficult to clean. They will have the most interaction with the turf and therefore get quite dirty. Here are some steps to make sure your irons and wedges are very clean.
What does it mean when your golf club has a scratch?
If the scratch is across the face of your irons or wedges, it could be affecting the play. You may want to take your club to a local repair shop and have them see if the scratch is deep enough that it is affecting the play of the club. A very light scratch in a club is probably not going to have much impact.
How to clean a driver with irons?
When you are cleaning your irons simply dip your driver’s head in a bucket of warm soapy water . Use the same microfiber cloth to clean the driver and then rinse it and dry it like you would with the irons. There is really no reason to use a brush to scrub the driver as it risks a scratch to the face or top as well.
How to get rid of rust on golf clubs?
If you notice some rust starting on your golf clubs, vinegar is also a great way to get rid of it. If the situation seems pretty bad, making a paste with vine gar and baking soda and letting it sit on your club for a few minutes can really change the way the golf clubs look.
What to do if you have scratches on your golf club?
If the scratch or mark is on the top of your driver, you can use a golf club paint to paint over the scratch and clean it up a bit.
How to clean golf grips?
Step 1. Fill a bucket or sink with warm water and add a splash of washing up liquid to create plenty of soap suds. Step 2. Use a wet cloth to collect some suds, and then rub them into the grip. Related: Best Golf Grips. Step 3. Once scrubbed, run your grips under flowing warm water to rinse them.
How to clean driver and putter clubs?
Instead, either dip them in and out and rub down with a cloth, or use a wet cloth to wipe them over. Then dry them thoroughly.
How to clean irons without irons coming up?
Step 1. Squirt a little washing up liquid into your bucket or sink and fill it with enough lukewarm water to cover the heads of your irons without the water coming up over the ferrules if possible.