Generally, the more flexible a shaft, the higher the ball flight. The lower the bend point in the shaft, the higher the ball flight (minor affect). Generally, the stiffer the shaft, the lower the ball flight.
What are the best golf shafts?
best golf shafts for irons
- UST Recoil ZT9 Iron Shaft Set. UST Mamiya Recoil ZT9 Iron Shafts are known for the best and unparalleled stability in the industry.
- Aerotech Steel Fiber FC 90. The new SteelFiber FC shafts are designed with a progressive tip that gives higher ball flight in the mid- and long irons also classic ...
- Mitsubishi-Rayon Kuro Kage Black 70 Iron R Shaft. ...
How to choose the best golf shaft?
Info - Choosing the Best Shaft for Your Game
- Choosing the Best Shaft for Your Game. ...
- Shaft Selection Primer 1.0: Single most important determining factor in shaft flex (indicator of overall strength of the player).
- Swing Tempo - Pace of the Swing. ...
- Release. ...
- Trajectory - Height of Ball Flight. ...
- Flight Direction Tendency. ...
- Distance Control. ...
- Price. ...
What is the most expensive golf shaft?
Seven Dreamers & The World’s Most Expensive Shaft. The story behind Seven Dreamers Laboratories and its $1200 golf shaft. Is $1200 a lot for a golf shaft? It sounds like a lot, particularly for an entry-level model. It is, and Seven Dreamers Laboratories is entirely good with that. Seven Dreamers started in 1957 as a company called Super Resin.
What is the difference between shafts in golf clubs?
What swing speed requires a stiff shaft?
- Swing speeds above 105 mph Extra Stiff
- Swing speeds between 90-105 Stiff
- Swing speeds between 80-95 Regular
- Swing speeds between 70-85 Senior
- Swing speeds less than 70 Ladies
How do I know which shaft is right for me?
5 factors to help you find the right driver shaft for your swingFlex. Generally speaking, a driver shaft that's too stiff will cause shots to launch too low, with too little spin and low peak heights. ... Weight. The weight of a shaft has a similar correlation to performance as flex. ... Length. ... Kick point. ... Torque.
Should all my shafts be the same?
Golfers should therefore never automatically have the same shaft in their driver and 3 wood. Club fitters generally advise a 3 wood shaft be 10 grams heavier & more flexible but the decision point for each golfer should mainly focus on what shaft delivers the best results for each club individually.
Do I want a lighter or heavier shaft?
Weight in the shaft is linked to your preference for feel and swing speed. Fast swing speed will benefit from a heavier shaft to provide more control without losing distance. Slow swing speed and tempo will benefit most from a lightweight shaft.
Should all my golf clubs have the same shaft?
Clubfitters recommend golfers have the same shafts in their wedges and irons. Different shaft flexes & weights can lead to loss of distance, greater shot dispersion and different ball flight than expected. Better players can however select softer flex shafts for high lofted wedges for more control.
Should all my golf clubs be the same flex?
Really, it's up to you and your fitter to determine your best flex profile for each and every club. Even if that means having shafts of varying flex through the set. And for the matter, flex has much more to do with how rigid a shaft is.
Will I lose distance with a stiff shaft?
If the shaft flex is too stiff, your average distance will remain low.
How do I choose the right golf shaft weight?
The easiest way to think about it is that, in general, the faster you swing it, the heavier the shaft you should use. However, things like how you load the shaft during the transition can make change what weight works best for you. It's always best to get properly fitted by a pro.
How do I know if my golf shaft is too light?
A shaft that's too heavy will cause a “labored golf swing.” A shaft that's too light will hurt your ability to make solid contact. When you find the right shaft weight, you'll experience a “high energy swing” with uniform contact.
Is a 70 gram driver shaft too heavy?
A 70-gram driver shaft is considered to be pretty heavy but not the heaviest. It falls into the middle but is still on the heavier side when you consider you could go with 50 or 60 grams instead.
What happens if your golf shaft is too stiff?
If your golf shaft is too stiff and your swing speed is too slow, your well-struck shot will be limited on both carry distance and shot trajectory; a too-stiff golf shaft will most often lead to weak fades or slices.
Is it OK to mix brands of golf clubs?
As a whole it is not only ok to have a mix of golf brands in your golf set but if done consciously it will ensure you have the best set of clubs for your swing.
What happens when your golf shaft is too flexible?
If the shaft is too flexible, you will have a 'whippy' feeling in your hands, and you won't be able to feel the clubhead on the downswing. When the golf ball is struck it will generally have too much spin if the shaft is too flexible, this will cause a 'ballooning' effect on the shot and it will tend to go quite high.
How much higher is a stiff shaft?
The rule of thumb for most manufacturers is that the difference between the flexes is about 10 CPM. So the CPM for a stiff shaft is roughly 10 higher than for a regular shaft. This is at least the case with Ventus, Motore, Vizard, Accra and Mitsubishi.
Why are driver shafts so interesting?
Driver shafts are so interesting because they have the exciting task of providing maximum speed transfer while minimising dispersion. It is no secret that the right driver shaft can make a big difference. It's not for nothing that professionals are constantly testing and trying to get the maximum out of them, whereas with iron shafts they often ...
What shafts have 55g?
It is noticeable that there are also shafts with 55g in this category, such as the Accra TZ5 S or the Kiyoshi Black 55 03. Both shafts are actually stiff and particularly stiff for their weight class. Ventus Blue and Black are also in this range with the 6 X.
What is the shaft profile of a Fujikura Ventus?
The Fujikura Ventus, for example, has a very special bending profile in which the middle part of the shaft is extremely soft, while the tip is particularly stiff.
What is the Armrq 47 shaft used for?
They are mainly used by ladies and seniors who have difficulties accelerating the club. The Armrq 47 is the shaft used by Honma Beres. As expected, this shaft is extremely soft. The special thing about this shaft, however, is the low torque.
Is a Fujikura driver shaft bad?
This is not to say that these driver shafts are all bad. It just means that they are not the same shaft and that stiffness, profile and above all weight can vary greatly. A Fujikura Ventus made for shaft, for example, which is now used by some of the major manufacturers, has little to do with the original Fujikura Ventus and it is possible ...
Do OEM shafts have Velocore?
OEM or Made for shafts do not have this Velocore technology and therefore have little in common with the original. The profile of a shaft has to fit the player and it is a very individual matter. That is why a fitting is always recommended, in particular for drivers.
What is the first thing to decide on golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...
What are the different types of golf shafts?
There are two basic types of golf shafts: steel and graphite. Often, your club will have been originally assembled with either of these types of shafts, however if you decide that you would like to change your type of shaft, you should know the difference between each shaft type. There are some newer options that combine the two materials, ...
What is a multi-material shaft?
A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.
How long should a 5-iron shaft be?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How much does graphite shaft weigh?
Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.
What is the difference between steel shafts and graphite shafts?
Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.
What is the kick point of a golf shot?
The shaft kick-point – also known as flex-point – is the point where the shaft bends and affects the trajectory of the shot. Although the effect is only small, it is still measurable.
What are the characteristics of a golf shaft?
Golfers often want to know about the three main characteristics of a golf shaft: weight, kick point, and torque. In this video, you will learn how these three specs are actually connected and how they affect each other.
What does the shaft do in golf?
Having the right shaft in your golf clubs makes a world of difference to your game. The shaft affects club performance on everything from spin, launch, and speed. The wrong shaft could cause the ball to launch too high or too low as well as spin too much and cause you to lose distance.
What does a soft shaft do in golf?
The soft shaft made sure that the clubface stays too open - hence the push. You can easily imagine this: The shaft "bends too far back" during the moment of impact and thus "stays away" from the ball. The release is "delayed" and the clubface remains open.
What is the most important thing about soft shaft golf?
The most important thing is that this player had trouble controlling the direction with the regular shaft. It is clearly visible that the typical draw of the player with the soft shaft is missing and the ball stays to the right of the target. The soft shaft made sure that the clubface stays too open - hence the push.
Is a stiff shaft from shaft A harder than a stiff shaft from shaft B?
A Stiff shaft from shaft A can be significantly softer or harder than a Stiff shaft from shaft B. The flex can also vary with different weights. For example, a Nippon Modus 120 in Stiff can be harder than a Modus 105 in Stiff.
Is flex equal to flex?
Flex not equal to flex. It is also important to note that we have tested two identical shafts with different flexes. A label like "Regular" or "Stiff" itself does not say much. Every manufacturer and every shaft series is different here. A Stiff shaft from shaft A can be significantly softer or harder than a Stiff shaft from shaft B.
Can a soft shaft produce more hooks?
A general statement that a soft shaft produces more hooks or pushes is therefore not possible . The test again shows how individual the shaft Flex can be. Shafts are very complex and identical shafts can produce completely different results for two different players with identical club head speed.
Why is shaft length important in golf?
An increased shaft length creates a greater swing-arc, which relates to more distance. Shorter stature golfers often increase the length of the shafts and stand further away from the ball. The longer the shaft the less control and this is where fitment assists.
What weight shafts are available for clubfitters?
Clubfitters now have the option to fit these shafts with weights from 95 to 110gm. This is a reduction from the 115 to 125gm range previously on offer. Steel generally has less flex, more stability, low torque, and provides more accuracy. Standard steel shafts are shorter.
What is carbon fiber shaft?
Modern composite graphite shafts have 3 layers of fiber winding, adding substantial rigidity and performance. Carbon fiber offers increased flex, greater clubhead speed, but reduced accuracy, due to more torque. It also dissipates the stinging shock from a poorly struck shot and will protect the hands and wrist.
What is flex in golf?
Flex. Put very simply, flex is the amount of bend in the shaft. It affects launch angle, spin, ball flight, control, carries, and distance. Shafts are qualified in different ways but reference to flex is the most important. Powerful swings require stiffer shafts which put less load on the shaft.
What happens if you don't have a stiff shaft?
The result is a loss of distance. Added to this the direction control will be lost.
When did steel shafts become legal?
Finally in 1924 steel shafts were legalized and Billy Burke was the 1st to win the US Open with steel. From 1960 to 1970 the aluminum shaft was introduced but besides expensive, it broke very easily. Then followed graphite shafts, displayed at the 1970 PGA merchandise show for the first time.
Is there a real standard for shafts in golf?
It is accepted within the golf industry that there are no real standards when it comes to shaft manufacture and the different properties they all claim to have.
Why is my golf ball inconsistent in all directions?
Improperly fit shafts can cause inconsistency in flight direction, due to the mismatched flex characteristics of the shaft to the player, and the players perception and compensation for the mismatched flex. Generally, too flexible a shaft can cause inconsistent directional ball flight in all directions. Too stiff a shaft can lead ...
Can club fitters analyze data?
Yes, we as club fitters can analyze data we acquire on many of the wonderful launch monitors that are available, and narrow down choices based on the data. This does take some of the guess work out of the decision and gives us performance data to base a decision on.
Do shafts always equal performance?
A broad range of prices exist in the shaft category. Price does not always equal performance. From a performance standpoint, shafts should be chosen based on their specifications and how those specifications fit the players swing characteristics, providing the desired trajectory, feel and consistency.
fixyurdivot
I poked around and searched this sub forum for a thread about comparing various shafts. No doubt there has been one and I'm missing it. I see many graph charts that compare shafts and want to know if there is a source that most find reliable.
cnosil
I haven't seen a chart on here. The best free source I have found is if you look at the manufacturer catalogs; sometimes they compare shafts and put them in a launch/spin graph. There is a pay site that will give you the EI profile charts for various shafts. the later is probably the best source.
jaskanski
If you could tell us what shafts are in the potential i500's, then we could give you an indication on how they compare to your current set....
fixyurdivot
If you could tell us what shafts are in the potential i500's, then we could give you an indication on how they compare to your current set....
jaskanski
The shaft that would be a good match is probably subjective, but there are two areas to look at in terms of what you have currently been fitted for.
fixyurdivot
The shaft that would be a good match is probably subjective, but there are two areas to look at in terms of what you have currently been fitted for.
jaskanski
The Mizuno tool gets you 3 shafts in your ballpark, but you still have to choose which is right for you - particularly if you're playing at +1". Again, due diligence in your methodical selection process pays off in the long run.
Which shaft is the most played on the PGA Tour?
Companies like Fujikura, Mitsubishi and True Temper each offer hundreds of driver shaft options, sometimes dozens under the same model. Fujikura’s Ventus, which has been the most played shaft on the PGA Tour, is available in 23 versions on its website. True Temper’s Project X HZRDUS has 70 varieties.
What is the right shaft for a high handicapper?
The right shaft, even for a high-handicapper, lines up with the signature of your swing.”. There are general rules all fitters use: (1) A lighter shaft will be easier to swing faster and is likely to launch the ball higher. But it’s best to match your strength to shaft weight.
