- Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off.
- Cut the club at the desired length. Using the hack saw, carefully cut the club where you marked it. Be sure keep fingers away from blade for your safety.
- Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down.
- Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft.
Full Answer
How to shorten a golf club?
How to Shorten Golf Clubs 1 Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip. 2 Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ... 3 Wrap masking tape around the area of the shaft that will be cut. ... More items...
How do you cut a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to fix a loose Golf Club grip?
Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip. Use a utility knife to cut the side of the existing grip.
Why do golfers cut down shafts and reinstall them?
But some do-it-yourself golfers also cut down golf shafts, then reinstall them in their clubs. They do this to make their clubs better fit their swing, which might mean cutting the shaft simply to change length, or to change swingweight, flex or other playing characteristics.
Can I cut down my golf clubs?
If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How do you cut golf clubs at home?
0:363:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipGood measuring stick a marking pin will need a chop saw that we can chop with and we'll also need aMoreGood measuring stick a marking pin will need a chop saw that we can chop with and we'll also need a grinder just to trim off the burner off the end of it before the club is reesh aft.
How much can you shorten a golf club?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
How do you cut down a golf club shaft?
0:444:01How to Cut Golf Shaft DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for the first step you have to remove your old grip. I find the easiest way to do this is toMoreSo for the first step you have to remove your old grip. I find the easiest way to do this is to literally just cut a line all the way down your club.
Can I cut my irons to one length?
1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the sameMoreSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard.
Should I shorten my long irons?
A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.
How long should your golf clubs be for your height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
What if golf clubs are too long?
5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.
When should I shorten my golf clubs?
Should Your Clubs Be Shortened?A golfer's height while standing straight up.A golfer's height while addressing the golf ball.A golfer's arm length when standing straight up.A golfer's arm length when addressing the golf ball.Additional measurements like swing tendencies, impact with the ground, and more.
How do you cut a graphite golf shaft at home?
1:2914:05Golf Club Repair - How To cut a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big toolMoreIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big tool nut don't skimp even if it's a hand tool.
What can I use to cut a graphite golf shaft?
One solution to manually cut golf club graphite (or composite) shafts fast, safe and efficiently is the rod saw blade.
Does cutting a shaft make it stiffer?
When you cut off a portion of the softest part of a golf shaft (the tip), it increases the overall stiffness. The handle section of a shaft, on the other hand, is longer and more uniformly stiff, so removing material from the handle does not make such a pronounced difference in overall stiffness.
How do you cut a graphite golf shaft at home?
1:2914:05Golf Club Repair - How To cut a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big toolMoreIf you're gonna if this is going to be your primary cutting tool don't skimp alright I'm a big tool nut don't skimp even if it's a hand tool.
Does cutting a shaft make it stiffer?
When you cut off a portion of the softest part of a golf shaft (the tip), it increases the overall stiffness. The handle section of a shaft, on the other hand, is longer and more uniformly stiff, so removing material from the handle does not make such a pronounced difference in overall stiffness.
Can I cut an inch off my driver shaft?
Shortening the shaft will make the club shorter but it will also make the shaft stiffer and adjust the swing weight as well. Plus, the more length you remove, the less flex your club will have. Depending on how much you cut it down, it could move a regular flex to a stiff or a stiff to an extra stiff.
Can I cut graphite shaft with hacksaw?
Yes, it is even strong enough to cut steel. It can cut through a graphite shaft in 15-20 seconds after the shaft has been securely place in your vise. The model we sell fits on a standard 12” hacksaw frame found at any hardware store or in many home shops.
How to shorten a golf club?
How to Shorten Golf Clubs. If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How to keep golf club from moving?
Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip.
How to wrap a golf club grip?
Start at the end of the club and wrap grip tape around the shaft. Overlap the previous layer of tape slightly to keep it tight. Smooth out any wrinkles or bumps in the tape as you go along.
Why is the shaft narrower at the head end of a golf club?
The shaft of a golf club is narrower at the head end to generate power on the swing. When shortening a golf club, you must remove the grip and cut the wide end of the shaft so the club can still flex properly.
How to cut a club shaft with a rotary tool?
Insert the cutting blade attachment into the rotary tool according to the instructions in your owner's manual. Use the rotary tool to cut the club shaft along your marked line. Smooth out the end of the shaft with a piece of fine grain sandpaper.
How to dry golf grips?
Place the grip over the end of the shaft and push it down before the solvent dries. Inspect the fit of the grip and press out any uneven spots with your fingers. Allow the grip to dry overnight before using the club.
How to cut a golf club length?
1. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off. This distance should be taken from the top of the club. Mark the length. Use a permanent marker to mark where the cut should be made.
How to dispose of a golf club grip?
Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.
How to lubricate a golf grip?
Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.
How to install grip tape on a golf cart?
1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.
How to get sticky glue off of a golf grip?
Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.
How long does it take to shorten a golf club?
Believe it or not, you can adjust them yourself, without going to a professional. These relatively easy steps will help you shorten a golf club in 45 minutes or less! Steps.
How to smooth out a metal shaft?
Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft. It will be sharp, and you do not want to rip the new grip that you will put on later.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
What happens if you cut too much off a golf club?
If you cut too much off of a club, you’ll be making the shaft a lot more rigid. You’ll also be getting into a skinnier section of the shaft, and that might affect the possibility of finding a grip that will fit appropriately. You don’t want to find out that you took too much by watching your club fly out of the grip on the follow-through of the first shot that you hit with it.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
How to measure for a new grip on a golf club?
That will tell you how much tape you need to apply to the shaft in order to get maximum adhesion without having any extra sticking out of the bottom of the grip. Once you know how much tape you’ll need on the shaft, measure the shaft, and make a mark a little short of the full length of the grip.
What tape do you use to secure a golf grip?
Adhesive Tape (for securing the new grip – purchase from a pro shop) (the amount you’ll need depends on how many clubs you’re planning on cutting down)
How to cut graphite shafts?
Once you have marked the spot where you want to cut the shaft, reposition the shaft in the vice so that you can cut it comfortably and safely. Be sure to set the club in the vice in a way that will protect it from getting bent under the pressure you apply during cutting if you are using a hack saw. For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible.
How long does it take for a golf club to cure?
Once you have the new grip in place, you will need to let the adhesive dry and cure. It will take approximately 6-8 hours for a full cure. It’s probably best to let the club dry overnight before you take it out for practice swings.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
Why add weight to a clubhead?
And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Do all golf shafts have to be cut down?
Did you know that almost all golf shafts are cut down to size before being installed in golf clubs? It's part of the manufacturing and club-building process for new clubs.
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
Why cut down a golf club?
In short, cutting down a club leaves less shaft to offset the weight of the club. And since some players -- including many tour pros with their putters -- still cut down clubs, it's important to know how to offset the potentially negative impact. First, clubs should normally be cut from the butt (or grip) end.
What putter did Sergio Garcia use?
Much was made of Sergio Garcia's change to a TaylorMade belly putter prior to the British Open, but at the Tour Championship the Spaniard used a new putter -- a Guerin Rife Barbados model -- to finish fourth. Last week's putter was heel-shafted; the belly model Garcia used at Carnoustie was center-shafted. ... Mark Calcavecchia was down to one putter in Atlanta (he had used a pair in a previous FedEx Cup event). Calc also went with a new driver (a Ping G10) with the same old-school loft (7.5 degrees) he has used all year. ... So with a $10 million annuity on the line, what did __K.J. Cho__i do? Switch to a set of Nike Ignite irons, a lower-priced club that retails for $400 for a set of eight. Fellow Nike staff player Rory Sabbatini won earlier this year at Colonial using the bargain bats. ... Ernie Els gave fans at East Lake a sneak preview of Odyssey's putter line for 2008 when he used a Black Series i3 model. The putter features a new, firmer face insert. ... Those at last week's PGA Fall Expo in Las Vegas got a look at Nike's driver line for next year, including revised Sumo2 and Sumo drivers. The drivers, which won't be available until February, feature a deep face, and the square-shaped Sumo2 boasts a moment of inertia of 5,900 -- highest allowed by USGA rules.
What is a women's golf club?
In reality, the standard women’s golf club is designed for the typical woman player -- someone who’s smaller and less powerful than a man. But not all women are standard. If you’re very tall, for example, then you can use men’s clubs.
What is the difference between a men's and a women's golf club?
A standard women’s golf club is 1 inch shorter and more flexible than a comparable men’s club. For example, a standard men’s steel-shafted 5-iron is typically 37.75 inches long, while the women’s version is 36.75 inches long. A standard women’s shaft is more flexible than the comparable men’s shaft because players with slower swing speeds require more flexible clubs. But don’t be fooled by the fact that the most flexible shafts are labeled as “ladies” shafts. That label is just a marketing convention used by manufacturers. Even if you use a standard women’s-size club, the shaft flex should be matched to your swing speed, not to your gender. Additionally, women’s clubs are designed to make it easier to hit the ball in the air, particularly with fairway woods and long or middle irons.
What clubs do women use on the LPGA Tour?
Miller notes that women who play professionally on the LPGA Tour use men’s golf clubs. For example, the 6-foot-tall Michelle Wie uses an X, or extra stiff, flex in her clubs, which is the stiffest type of shaft. Lexi Thompson, who’s 5 feet, 11 inches, also plays an X-flex and uses a men's-sized 45-inch driver. Remember that to use the same clubs as Wie or Thompson, you must not only be tall, but have an LPGA-quality swing speed in excess of 90 mph with your driver.
Why are women's shafts more flexible than men's shafts?
A standard women’s shaft is more flexible than the comparable men’s shaft because players with slower swing speeds require more flexible clubs. But don’t be fooled by the fact that the most flexible shafts are labeled as “ladies” shafts. That label is just a marketing convention used by manufacturers. Even if you use a standard women’s-size club, ...
Do women golf clubs fit?
Fit the Clubs to the Golfer. If you’re a typical woman golfer, then women’s clubs are probably right for you -- although every golfer should be fitted personally. Just understand that some aspects of women’s clubs -- like those pink highlights -- are nothing but marketing touches. If possible, obtain your next set of clubs from a professional ...
Do women's golf clubs have shaft flex?
Even if you use a standard women’s-size club, the shaft flex should be matched to your swing speed, not to your gender. Additionally, women’s clubs are designed to make it easier to hit the ball in the air, particularly with fairway woods and long or middle irons.
