Golf-FAQ.com

how to cut down golf clubs for youth

by Daphnee Hartmann III Published 3 years ago Updated 2 years ago
image

How to Cut Down Golf Clubs for Juniors

  • Start with Determining the Length. When changing golf club length [how to change golf club length] for juniors, one of...
  • Position the Golf Club. Next, put the golf club in a stable position. Do not hold it while cutting. Instead, it is good...
  • Take the Grip Out. The next step is removing grip tape from the golf club [how to remove...

Full Answer

Can you cut down an adult set of golf clubs for kids?

In years past, before junior golf shafts were available, parents made it a common practice to cut down an adult set of golf clubs for their kids. This is certainly an inexpensive way of creating a junior golf set; however, it is not a good solution for several reasons.

How to shorten a golf club?

How to Shorten Golf Clubs 1 Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip. 2 Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ... 3 Wrap masking tape around the area of the shaft that will be cut. ... More items...

Why do golfers cut down shafts and reinstall them?

But some do-it-yourself golfers also cut down golf shafts, then reinstall them in their clubs. They do this to make their clubs better fit their swing, which might mean cutting the shaft simply to change length, or to change swingweight, flex or other playing characteristics.

What happens if golf clubs are too long for a junior?

If the clubs are too long, the golf junior will have a tendency to automatically choke down on the club, which will not be beneficial to the child's swing. Obviously, the child's build and athletic ability may allow for slightly longer clubs in some cases.

image

Can you shorten golf clubs for kids?

0:013:20Is it OK to Cut Down Golf Clubs for Kids? - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat they want to do is they want to take an old set of clubs that they're not using anymore. CutMoreWhat they want to do is they want to take an old set of clubs that they're not using anymore. Cut them off and give them to their kids or their wife. Usually. It's their kids.

Is it OK to cut down golf clubs?

Golf clubs are often sold in a “standard” length, which is relative to each club. However, golfers differ in height and arm length, so sometimes the length of a club must be adjusted. Not only can golf clubs be lengthened for people who need it, but they can also be shortened.

How much does it cost to cut down a golf club?

How much does it cost to shorten golf clubs? On average, it will cost $3-5 per club plus the cost of a new grip to shorten your clubs. If you're looking to save your old grips, you won't have to pay for new grips, but you'll have to pay a save grip fee of around $10 per club.

How do you cut golf clubs at home?

0:363:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipGood measuring stick a marking pin will need a chop saw that we can chop with and we'll also need aMoreGood measuring stick a marking pin will need a chop saw that we can chop with and we'll also need a grinder just to trim off the burner off the end of it before the club is reesh aft.

Do shorter golfers need shorter clubs?

Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.

Can I cut my irons to one length?

1:2210:28I cut down my long irons - One length irons combo - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the sameMoreSo I took my Wilson v6 I played off my sex iron. So I made six iron 5-iron and for iron all the same length. So my Wilson V SEC sounds were already an inch longer than standard.

What happens if golf clubs are too long?

5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.

How much does it cost to get irons cut down?

Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.

How much does it cost to have irons cut down?

The average cost to regrip your golf clubs will be between $35-$190. The price you pay will depend on what grips you choose and whether or not you regrip them yourself. Expect to pay $35 if you do everything yourself and get the cheapest grips.

Can you change the length of golf clubs?

To avoid cutting the shaft or adding an attachment, purchase a new shaft at your desired length. Cut the ferrule and remove the clubhead from the old shaft as you did before trimming the tip. If you wish to keep the original grip, use an air compressor to separate it from the old shaft, then pull the grip off.

Should you shorten your irons?

Additionally, shorter length golf clubs can provide more control to the golfer, essentially making the golf club more forgiving. While longer clubs can help increase speed and launch angle, shorter clubs can be easier to hit solid due to the reduction in swing arc.

What can I use to cut a graphite shaft?

One solution to manually cut golf club graphite (or composite) shafts fast, safe and efficiently is the rod saw blade.

Should I shorten my golf irons?

Additionally, shorter length golf clubs can provide more control to the golfer, essentially making the golf club more forgiving. While longer clubs can help increase speed and launch angle, shorter clubs can be easier to hit solid due to the reduction in swing arc.

What happens when you cut down a golf shaft?

The more shaft you cut off, the lighter, more stiff, and effectively flatter the club becomes. For every 1/2 inch you remove, you will lose approximately three swingweight points. You can readjust the swingweight by adding lead tape to the head of the club. Any amount of cutting will slightly stiffen the club.

Does cutting down a shaft make it stiffer?

"Cutting more of the grip end will still stiffen the shaft a little bit, but only because in doing so you make the shaft shorter, and not nearly as much as when trimming more from the tip end."

Does choking down reduce swing weight?

Stiffer Shaft Choking down lightens the club's swing weight and effectively makes the shaft stiffer.” Sadly, Anthony Kim has seemingly left the game forever but Trevino is right about how gripping down affects the club. Choking up does change the weight and makes the club shorter and slightly stiffer.

Start with Determining the Length

When changing golf club length [how to change golf club length] for juniors, one of the most important is to identify how short or long it will be. This will depend on the age or height of the user. Once you know the length, use a marker to identify the tip, so you will know where you will cut.

Position the Golf Club

Next, put the golf club in a stable position. Do not hold it while cutting. Instead, it is good to have a vise, which will grip the golf club, so none of your hands will be holding it. This way, it is not only more stable, but you can also be more focused on the cutting part.

Take the Grip Out

The next step is removing grip tape from the golf club [how to remove grip tape from golf club]. This will reveal the main material of the shaft, which also makes it easier to cut. Start by using a utility knife to cut from one end until the other tip. Peel the tape. You might need to exert a bit of force since it is glued in the shaft.

Cut the Golf Club

Next, start cutting the club. You can use a hacksaw to do this. The reason why you should clamp the club instead of holding it is to make the cut more precise while giving your hand the freedom to move. When cutting, use a consistent motion.

Wrap with a Grip Tape

Once you are done cutting the junior’s golf club at the desired length, it is time to wrap it with the new grip tape. This is an important procedure to protect the inner material from wear. More so, it will also make the golf club more comfortable to hold and will optimize its performance.

How to shorten a golf club shaft?

To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."

Why add weight to a clubhead?

And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."

What is the difference between a golf shaft and a tip?

All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...

Do all golf shafts have to be cut down?

Did you know that almost all golf shafts are cut down to size before being installed in golf clubs? It's part of the manufacturing and club-building process for new clubs.

Should the reduction in length be made from the grip end only?

"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.

How are kids golf sets broken down?

Most kids' golf sets are broken down by age groupings, and for the beginning golfer that will work fine—in most cases. However, there are other considerations that should be taken into account.

What happens if a youth club is too long?

A youth club that is too long, too heavy, or too stiff will diminish your child's ability and potentially cause frustration. Choosing the right clubs the first time around will get the desired result: a fun and rewarding experience for both you and your child.

How tall is a Dexton golf club?

Using the height vs. driver length chart above, this set of Dexton Big Driver Junior Golf Clubs would be appropriate for heights of 36" to 42" with this 27" driver.

What is included in the Dexton Big Driver Junior Golf Set?

This Dexton Big Driver Junior Golf Set has a putter, 3 Wood, and a 5/6, 7 and 9 iron. The bag and club covers are also included.

What is a good junior golf set?

As your child gets older and more proficient, a good junior golf set will include the putter, a 3 wood and a 5, 7 and 9 (pitching wedge) irons. Do not add too many of the lower lofted clubs such as the 2 or 3 iron to your child's set because youngsters will not be able to get the ball airlifted with these lower clubs.

Why do taller golfers need heavier clubs?

Taller and stronger golfers will need heavier overall weighted clubs so as to allow for a more natural swing. If the clubs are too light , bad swing habits could develop .

How long should a golf club be for a child?

The length of the clubs should be based on the child's height as well as the child's athletic ability. If the clubs are too long, the golf junior will have a tendency to automatically choke down on the club, which will not be beneficial to the child's swing. Obviously, the child's build and athletic ability may allow for slightly longer clubs in some cases. And a larger child will have more body mass, which may allow for a somewhat longer club than would be appropriate for someone who is lighter weight. In addition, some youth golfers will have better hand-eye coordination, so a longer club could be in order.

Why doesn't he like giving the younger kids the adult clubs?

He didn't like giving the younger kids the adult clubs, even though they could be nicer, because they would be to heavy or big and throw off their swings. Also your kids don't need a set. Just like a wood and a iron, and as they show more interest you get them more. Agree with this.

Can you cut a golf shaft for kids?

Agree with this. Besides the weight, cutting the shaft will make it play stiffer. The clubs designed for kids have nice whippy shafts for their slower swings. A full set to start is overkill - most of the new kids "sets" only have 3 or 4 clubs, plus a putter anyways.

Support TST Affiliates

Direct links for Mevo, Mevo+, and Pro Package. Save 10% on Mevo with coupon code "IACAS" as well.

Posts

Well everyone, I’ve been convinced! Too much support for me to not do it at this point. Erik, I’ll reach out on the Golf Evolution contact form and hopefully we can set something up soon. I greatly appreciate the input everyone, thank you!!

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9