- Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off.
- Cut the club at the desired length. Using the hack saw, carefully cut the club where you marked it. Be sure keep fingers away from blade for your safety.
- Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down.
- Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft.
Full Answer
How do you cut a golf club?
Cut the club at the desired length. Using the hack saw, carefully cut the club where you marked it. Be sure keep fingers away from blade for your safety. Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down. Sand/dull the end of metal that was just cut.
Why do golfers cut the shafts on their clubs?
They do this to make their clubs better fit their swing, which might mean cutting the shaft simply to change length, or to change swingweight, flex or other playing characteristics. What effect does trimming the shaft have on a golf club?
What supplies do I need to cut down my golf clubs?
Adhesive Tape (for securing the new grip – purchase from a pro shop) (the amount you’ll need depends on how many clubs you’re planning on cutting down) New Grip (one for each club that you’ll be cutting down) Once you’ve gathered all of your supplies and prepared your workspace for the job, you’re ready to get started.
How to shorten a golf club?
How to Shorten Golf Clubs 1 Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip. 2 Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. ... 3 Wrap masking tape around the area of the shaft that will be cut. ... More items...
Can I cut down my own golf clubs?
If you have purchased a set of used golf clubs that are too long, you can quickly cut them down to size with a hand-held rotary tool. You can also resize your old clubs and pass them on to your children. The shaft of a golf club is narrower at the head end to generate power on the swing.
How do you cut golf clubs at home?
0:363:03Golf Tips : How to Trim Golf Club Shafts - YouTubeYouTubeStart of suggested clipEnd of suggested clipGood measuring stick a marking pin will need a chop saw that we can chop with and we'll also need aMoreGood measuring stick a marking pin will need a chop saw that we can chop with and we'll also need a grinder just to trim off the burner off the end of it before the club is reesh aft.
How much does it cost to cut down a golf club?
How much does it cost to shorten golf clubs? On average, it will cost $3-5 per club plus the cost of a new grip to shorten your clubs. If you're looking to save your old grips, you won't have to pay for new grips, but you'll have to pay a save grip fee of around $10 per club.
Can I cut my irons down?
Any amount of cutting will slightly stiffen the club. It will probably go unnoticed if you take 1 inch or less off the club. Taking 2 inches off will change the flex of the club. If you are shortening irons, every 1 inch you shorten the club will make the iron effectively play 2 degrees flatter.
What can I use to cut a graphite shaft?
One solution to manually cut golf club graphite (or composite) shafts fast, safe and efficiently is the rod saw blade.
Should I shorten my long irons?
A shorter club technically should improve control and accuracy. A longer club technically should increase distance. A club that is properly fitted in terms of the length of the shaft will maximize accuracy and distance.
How much does it cost to get a club shortened?
The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440.
How long should my irons be for my height?
Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").
What if my golf clubs are too long?
5 Signs Your Golf Clubs are Too Long You can't move your lower body while swinging the golf club. You keep hitting the ball with the golf club's toe. The ball tends to veer off to the left or too high when hit by the club. The golf club's shaft feels very weak when held, gripped, or swung.
Do pro golfers shorten their clubs?
Most pro golfers use shorter shafts on their drivers than recreational golfers. Is this true? Absolutely true.
Do shorter golfers need shorter clubs?
Shorter golfers are often better served with shorter clubs, while the lie angle (how the club sits on the ground) may also need tweaking. If your clubs are too long and/or upright, you'll be forced to adjust away from a swing that's natural for you.
Are shorter irons easier to hit?
The short irons in your bag are more forgiving because of the higher launch angles and more confidence-inducing look to their setup. Most players can stand with an eight or nine iron in their hand and the club looks like it is going to get up in the air and produce some impressive shots.
How to cut a golf club length?
1. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off. This distance should be taken from the top of the club. Mark the length. Use a permanent marker to mark where the cut should be made.
How to dispose of a golf club grip?
Prepare the work area. Place a towel or clothes underneath your vice grip. Place the club into the vice. Put the club into the vice such that the grip end of the club is pointing at you. Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage.
How to lubricate a golf grip?
Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end. Shake this around to lubricate the inside of the grip. Put the grip onto the end of shaft. With your finger still holding all the solvent liquid inside the grip, slide the big hole onto the shaft.
How to install grip tape on a golf cart?
1. Apply grip tape to the end of the shaft. Put the new grip along the shaft to see how far down it will extend. This is how far you want the tape to go on each side.
How to get sticky glue off of a golf grip?
Spray with solvent. This will lubricate the tape so you can easily slide the grip over it. This solvent will dry up and become a sticky glue. Spray solvent into the grip. Hold your finger to the tee-sized hole at the end of grip and spray the solvent into the other end.
How long does it take for a metal shaft to cool?
Wait 10-15 minutes for shaft to cool off. The metal you just cut will be hot so set it aside for several minutes and allow to cool down. Sand/dull the end of metal that was just cut. Take the sand paper and carefully smooth the end of the shaft.
How long does it take to shorten a golf club?
Believe it or not, you can adjust them yourself, without going to a professional. These relatively easy steps will help you shorten a golf club in 45 minutes or less! Steps.
How to shorten a golf club shaft?
To do that, the DIY golfer will have to: 1 Remove the existing grip. 2 With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. 3 Re-install a grip on the newly shortened shaft. 4 And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club. "If clubs are shortened and no weight is added back to the clubhead, the chances of the length reduction having the desired effect are somewhere between slim and none."
What is the difference between a golf shaft and a tip?
All golf shafts taper; that is, their circumference is greater at the grip end than at the tip end. That means that the grip end is the strongest part of the shaft and the tip end the weakest, which, Wishon says, leads trimming to have different effects: "Cutting more of the tip will have the effect of getting rid of some of the weaker end ...
Should the reduction in length be made from the grip end only?
"If the goal in making the clubs shorter in length is a desire to gain an improvement in accuracy, the reduction in length should be made from the grip end only ," Wishon said.
What to do when cutting a golf club down?
The first thing that you need to do when you’re cutting a club down is to get the old grip out of your way. In order to do that safely, you need to have plenty of space to work in and a way to hold the club steady while you’re cutting. That’s where the prepared workspace and the vice come in.
How to get adhesive off of golf club?
Heating the tape up will soften the adhesive and make this step easier. Heat the adhesive with a heat gun or a hairdryer. Peel the tape off until you have removed it all from the shaft of the club.
How to get better adhesion on a grip?
It will also emulsify the adhesive and help it to get better surface adhesion with the inside of the grip. Plug the small hole in the top of the grip with a finger and turn the grip upside down. Spray some adhesive into the inside of the grip.
How long does it take for a grip to dry?
Once you have the new grip in place, you will need to let the adhesive dry and cure. It will take approximately 6-8 hours for a full cure.
How to cut yourself with a razor blade?
Put a fresh blade in your razor knife. A sharp blade cuts easier and that protects you from having to push or pull too hard, which could expose you to a higher risk of cutting yourself. A hook blade makes this step easier and safer. Slice through the grip until you have cut it from top to bottom.
What tool to use to cut graphite shaft?
For steel shafts, a hack saw is the best option for a clean cut. For graphite clubs, you will need to use a rotary tool with a cutting wheel to get the best cut possible. Cut the desired amount from the shaft. Be careful to avoid cutting yourself with the saw or the tool.
Does trimming an inch off a golf club affect the weight?
But since you’re only trimming a little bit—it will only have a small impact on the overall performance of the club. Like we said earlier, big changes have big side effects.
Cordless Drill
A cordless drill is great for small jobs and allows for quick moving around the shop.
Metal Drill Bits
H ere’s where things get personal for me. I had an inexpensive drill bit break almost instantly and go right into the palm of my left hand (and off to the ER I went). I was not a happy camper, but I did learn a very valuable lesson; don’t buy cheap drill bits and never drill toward another body part.
Dust Collector
You can’t cut or sand at any volume without creating dust. I don’t know what the long-term effects of breathing in graphite and steel dust are, but I’m not ready to be a test subject either. You may have noticed the ugly looking box around my chop saw.
How to measure for golf clubs?
To find the right size clubs for your body, use recent height measurement to determine the proper angle for your clubs. It usually helps to have another person measure, so you get the most accurate measurements possible.#N#Measure your basic height from the top of your head to the bottom of your feet. Stand up as straight as possible to get the measurement. You don't need to be in your swing stance.
Why do people buy off the rack golf clubs?
In fact, players with a higher handicap have a game that can be much more drastically improved with the use of custom-fit clubs that help to train the swinging motion properly .
What to do if you have a handicap?
If you're not sure of your handicap, a basic description of your skill level can go a long way in helping the fitter match you with the right kinds of clubs that will help improve your game.
Step 1: Remove the old grips
First, cut or peel off the old grips, which may or may not be straightforward depending on how long they’ve been on.
Step 2: Preparation
Next, starting at the butt end, wrap the double-sided tape round the grip working downwards and allowing sufficient space so that it doesn't start overlapping lower down as the grip gets narrower.
Step 3: Fitting the new grips
Place the club in the vice with the head pointing up, taking care to use a shaft protector (or similar) to avoid damage as you tighten.
