How to Calculate Golf Swing Weight
- Lay a pivot point over a flat surface. This is a triangular gauge that uses gravity for balancing any object placed over...
- Keep your golf club horizontally over the pivot point and hold it until the club balances properly.
- Measure the shaft of the golf club from the point where the club balances over the pivot point to the grip end at...
What golf shaft weight should I use?
How do I know if I need a stiffer shaft?
- Feels ‘whippy’ in your hands.
- Feels too light.
- Your ball is ballooning in the air.
- Your ball is behind your pitch mark when you hit your driver.
- You ball spins to much on the greens when you approach with your irons.
- Your accuracy has dropped.
- You start hitting hooks.
How important factor is shaft weight in golf clubs?
Weight Of Golf Shaft
- Weight Range of Golf Shafts At the time we spoke to Wishon, he told us that " shafts can be bought that weigh as much as 130 grams (4.6 ounces) ...
- The majority of our panel agreed that shaft weight is very important. ...
- If you really care about how your irons perform, you need the right shaft weight, as we found out in this test. ...
How does golf shaft weight affect playability?
When a shaft is lighter, it reduces what’s known as the total weight of a golf club, which is the weight of all components: the head, the shaft, the grip, and the things that hold them together such as the tip, tape, and epoxy. When the total weight of a club is reduced, it allows some golfers to swing faster.
What shaft weight should I use?
The shafts in the drivers of most golfers are probably in the 60 gram bracket. These shafts are light enough to help with speed yet heavy enough to give that feeling of more stability during the swing. This shaft weight will be beneficial to most golfers out there. 70 Gram Shafts – Who Are They For?
Do I want a lighter or heavier shaft?
In theory, a golfer should be able to swing a lighter shaft faster than he or she can swing a heavier shaft. But some golfers will not increase their swing speed with a lighter shaft. While it seems to go against the laws of physics, giving a golfer a lighter shaft can actually cause his or her speed to decrease.
Is 75 gram shaft too heavy?
75 and 85 Gram Shafts And Who They Are For? These are generally for your stronger and better players, as they will be generating a lot of clubhead speed, the weight of the shaft helps to keep the clubhead under control during the swing.
Is 120g iron shaft heavy?
Shaft weight in your irons Steel shafts weights vary between 85g to 130g and although this does not seem like an enormous difference it will make an impact in your shot-making ability. Furthermore, your strength, swing speed, swing tempo, and club length play an enormous role in determining shaft weight.
What is the best weight for a driver shaft?
The shafts in the drivers of most golfers are probably in the 60 gram bracket. These shafts are light enough to help with speed yet heavy enough to give that feeling of more stability during the swing. This shaft weight will be beneficial to most golfers out there.
How heavy is Rory mcilroy driver shaft?
They weigh in at D4. 5 with Project X Rifle 7.0 shafts and 6.5 in his wedges (Tour pros generally use softer shafts in their wedges for added feel).
How many grams should my shaft be?
The shafts in most drivers typically weigh between 40 grams and 85 grams. Shaft manufacturers will offer stiff and regular flex in nearly all weight classes while most light and ladies flex clubs will weigh no more than 55 or 60 grams, but could be as light as 40 grams.
What happens if shaft is too heavy?
Nippon suggested that a player should be able to tell largely by feel. A shaft that's too heavy will cause a “labored golf swing.” A shaft that's too light will hurt your ability to make solid contact. When you find the right shaft weight, you'll experience a “high energy swing” with uniform contact.
Are lighter iron shafts better?
Using a shaft that is optimized will lead to a consistently good ball and clubhead contact. That will result in improved accuracy and longer distance. The use of heavier iron shafts is said to contribute to greater accuracy, while lighter shafts are known to increase total distance.
What are the lightest golf shafts?
The company continues its lightweight heritage with its new N.S. Pro Zelos 6, which at 68.5 grams is the lightest constant-weight steel shaft in the market.
Is a 70 gram driver shaft too heavy?
A 70-gram driver shaft is considered to be pretty heavy but not the heaviest. It falls into the middle but is still on the heavier side when you consider you could go with 50 or 60 grams instead. Those 10 grams sometimes make a significant difference.
How do I know what golf shaft to use?
A player with a very fast swing will require a shaft with less flex, while a player with a slower swing will need a shaft with greater flex. Flex is generally rated as Extra Stiff (XS), Stiff(S), Firm(F), Regular(R), Senior(S), Amateur(A) and Ladies(L).
What gram shaft should I use irons?
Swing Speed Vs Iron Shaft Weight Table6 Iron Swing SpeedShaft Weight< 60 mph45 – 50 grams60 – 70 mph55 – 85 grams70 – 80 mph75 – 105 grams80 – 90 mph90 – 120 grams1 more row
What is a heavy driver shaft?
The heavier a shaft is, the more likely it is that your golf ball will fly low and with less spin. If it's lighter, the ball will tend to fly higher and spin more. As Briand explains, the weight of a shaft has less impact on swing speed than golfers think, but that lighter shafts could increase the rate of closure.
What weight should my 3 wood shaft be?
Your fairway wood shafts should be slightly (5 to 15 grams) heavier than your driver shaft. So if you are playing a 65 gram driver shaft (noted by a numeral 6. 65, or some other designation on the shaft decal), your fairway woods should be 70 to 80 grams.
Which driver shaft is best for me?
There is a thing you must know that the shaft flex really impacts the accuracy, trajectory, and distance of your shot. Therefore, getting the right flex in your golf clubs is essential....How Do I Know?Driver CarryFlexSwing Speed220-245 yardsRegular75-85 mph200-225 yardsSenior62-75 mph>200 yardsLadies>60 mph2 more rows•Mar 17, 2020
Is Lighter Really Longer?
(Written By: GolfSpy Matt) "Lighter is longer" -- "If distance matters, weight matters" -- "The Right Light".All of these marketing slogans are mea...
"You Mean There's More Than Flex?"
So after reading our MGS Labs report on shaft flex, you realized that playing the wrong flex can cost you distance AND accuracy. You also learned t...
Flightscope X2 Launch Monitor
Each golfer hit 10 shots with each shaft and the results were measured by our FlightScope X2 launch monitor. All testing was done at the range at T...
When discussing the manner of fitting the shaft weight and total weight of a golf club, should the conversation also include fitting
When discussing the manner of fitting the shaft weight and total weight of a golf club, the conversation should also include fitting the swing weight, or better stated, the head weight FEEL of the golf club at the same time. This is because the two “weights” of a golf club are very much interrelated in their effect on the fitting performance of golf clubs for each golfer.
Why is it important to fit the golfer for the correct weight and swing feel?
Fitting the golfer for the correct total weight and swing weight (head weight feel) is extremely important for enabling the golfer to achieve the highest level of shot consistency and swing repeatability . Too light or too heavy and the golfer struggles to maintain a consistent swing tempo, timing and rhythm.
Does shaft weight affect total weight?
This is because shaft weight is the No. 1 determinant of the total weight of the club. Yes, grip weight and head weight have an influence on total weight, but they aren’t as important as the effect of the weight of the shaft. In short, when the golfer needs a lighter or heavier total weight in the clubs, fitting the weight ...
Why is the weight of a golf club head important?
This is because, at impact, the transfer of energy is related almost entirely to the weight of the clubhead.
How many inches of shaft is closest to clubhead?
The first four inches of the shaft nearest to the clubhead also play a role in energy transfer, but it’s a minor role as the first four inches of the shaft, regardless of shaft model, does not vary as much as clubhead weight.
Why use lighter shafts?
Using a lighter shaft allows more weight to be placed in the clubhead through adjustable weights, hotmelt, etc. without increasing the total weight of the club. This “redistribution” of shaft weight into the clubhead can be one of the last tweaks in a fitting that unlocks more distance off the tee.
What happens when a golf club shaft is lighter?
When a shaft is lighter, it reduces what’s known as the total weight of a golf club, which is the weight of all components: the head, the shaft, the grip, and the things that hold them together such as the tip, tape, and epoxy. When the total weight of a club is reduced, it allows some golfers to swing faster.
How to increase distance on golf clubs?
There are two factors that are critical to increasing distance, and lighter shafts can help with both factors. These factors are: 1 The Speed The Club Head Is Travelling At Impact 2 The Mass Of The Club Head
Do two golfers need the same shaft?
Two golfers of the same size, strength, and speed can find themselves needing shafts of different weights to play their best. An in-person club fitting is the only way to know for sure that a golfer has the best shaft for them. For that reason, the purpose of this article is not to help golfers “fit themselves.”.
Can a lighter shaft cause speed to decrease?
While it seems to go against the laws of physics, giving a golfer a lighter shaft can actually cause his or her speed to decrease. This is no rare occurrence. Club fitters see it happen nearly every day.
What is the first thing to decide on golf shafts?
The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...
How to measure the length of a golf club?
In order to determine the length of your club, stand tall and get someone to measure from the crease where your wrist and hand meet to the floor. Do this with both hands and take an average of the two measurements.
What is a multi-material shaft?
A recent addition to the market are multi-material shafts which are used on both irons and drivers. This type of shaft incorporates steel and graphite into one shaft to get the best of both worlds for each player, to suit all playing types. Generally, the shaft is made using a steel shaft that has a graphite tip.
How long should a 5-iron shaft be?
The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.
How much does graphite shaft weigh?
Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.
What is the difference between steel shafts and graphite shafts?
Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.
What is the kick point of a golf shot?
The shaft kick-point – also known as flex-point – is the point where the shaft bends and affects the trajectory of the shot. Although the effect is only small, it is still measurable.
How many shots does each golfer hit with each shaft?
Each golfer hit 10 shots with each shaft and the results were measured by our FlightScope X2 launch monitor. All testing was done at the range at The Bridges of Poplar Creek Country Club.
Is shaft flex a governing body?
There is no ‘governing body’ for shaft flex that says a regular shaft or a stiff shaft has to be within a certain frequency range. That is why choosing a club solely based on shaft flex is highly flawed. After finding the right weight and torque, shaft flex is used to fine tune the shaft for the player.
Is shaft flex the end all?
The general golfing public has been conditioned and educated that shaft flex is the end-all-be-all when it comes to shafts and that simply is not true. The weight of the shaft is going to help keep the player’s swing on plane. Shaft flex has no industry standard.
How to determine golf shaft flex?
Start by using a launch monitor to analyze your golf swing speed. If your swing ranges between 85 mph and 95 mph then you should start with a regular flex. If your swing speed is faster than 95 mph, then you should try a stiff shaft.
What to know about golf shafts?
In today’s guide we will review everything you need to know about golf shafts. Picking out the proper golf shaft is very important as it will impact several components of your golf swing. For example, picking the wrong golf shaft flex can cause you to hook or slice the golf ball. It also can hinder the total distance the ball flies by having too much spin or too low of launch. But don’t worry, at the end of reading today’s guide you’ll be much more educated on the buying process and how to pick out the right golf shaft. Lets Get Started!
What is the best shaft for golf?
Steel – A steel golf shaft is usually stronger and more durable (less likely to snap) than a graphite shaft. It’s also less expensive and sometimes stainless steel is used in the creation of the steel shaft. There is also two variations, stepped steel and rifle steel.
Why does my golf shaft have a slice?
When the golf shaft is too stiff, it doesn’t unload properly at impact. This can lead to the face staying open and result in a slice golf shot. Beware, a slice isn’t always an indication the shaft is too stiff so if you already have a slice, it could be caused by another fault in your golf swing.
What shafts do golfers use?
For most golfers, a graphite shaft works great. Most iron sets are made with graphite shafts as well so you get that material type by default usually unless you specifically seek out steel shafted irons. With steel shafts, you may find that golf shots are easier to control.
Why do golf clubs have shafts?
During the golf swing the shaft causes deflection (bend) that causes the clubhead to be in a forward and toe downward position relative to the grip of the club.
What is the most common shaft material used in golf clubs?
Graphite Shafts. Graphite – this type of shaft is usually lighter weight compared to a steel shaft but it’s less durable and more expensive to make. Graphite is one of the most common shaft types used in golf clubs and can arguably be considered the main shaft material used, beating out steel.
How does the weight of a golf club affect the shaft?
The swing weight of a golf club is often directly proportional to the weight of its head. If the clubhead is heavy, the swing weight will also be heavy. This will result in the shaft playing soft. When the clubhead is light, the shaft will play stiff.
What does shaft weight mean?
As the name indicates, shaft weight refers to the weight of the shaft of your golf club. Shaft weight is an important aspect of any golf club and can have various consequences on your game. Incorrect shaft weight can affect your ball speed, result in wrong shots, lessen your distance and increase your dispersion.
How to increase weight of golf club?
Using a lead tape to increase the swing weight. Stick a few lead tape strips on the clubhead of your golf club. Depending on the width of the tape, a 1-inch long strip of tape will increase the weight of the club by 1 gram. Apply the strips on the lower back of the golf club towards its center.
How to adjust golf swing weight?
As a general rule of thumb, increasing the weight of the clubhead by two grams increases its swing weight by one point. Similarly, increasing the length of the golf club by one inch boosts the swing weight by six points.
What are the factors that affect the swing weight of a golf club?
There are four key factors that can have an impact on the swing weight of a golf club: Weight of your club’s grip. Weight of your club’s head. Weight of your club’s shaft. Length of your club. Altering just one of these parameters will modify the swing weight and in turn the feel of your golf club when you use it.
What is swing weight?
Swing weight refers to the weight of a golf club at one-third of its top section (head) and two-thirds of its bottom section (grip). Although swing weight can have a major impact on a golfer’s performance, it can’t be considered as an absolute measurement.
Why is my golf ball fat?
Turf contact. A heavy swing weight may result in hitting the golf ball thin. In contrast, you may be hitting the ball fat because of too light swing weight. Shot contact with the club. If the swing weight is heavy, the shots tend to get hit towards the golf club’s heel.
What shafts do you need for a slow swing?
Slow swing speeds will generally require softer-flex shafts, while high swing speeds need stiffer shafts; due to variations in swing patterns, however, swing speed is only one portion of finding the right shaft. Briand’s recommendation is to use your current driver shaft as a baseline.
What happens if you have a longer shaft?
As Briand says, a longer shaft will cause a less consistent strike on the face, and the golfer will tend to hit the ball closer to the heel. A shorter shaft, on the other hand, will cause a more consistent strike pattern, but impact location will tend to be on the toe. A golfer’s physical size, arm length, swing speed, consistency, ...
What does low torque mean on a shaft?
5. Torque. A low torque measurement means that a shaft has greater resistance to twisting, while a high torque measurement means it will twist more easily.
What happens if your driver shaft is too stiff?
Generally speaking, a driver shaft that’s too stiff will cause shots to launch too low, with too little spin and low peak heights. A shaft that’s too weak, on the other hand, may cause shots to spin too much, fly too high, and widen dispersion patterns.
How tall is Rickie Fowler's shaft?
A look at Rickie Fowler's fairway wood shaft, which measures 42 inches with 0.5 inches of tipping. Fitting a golfer into the exact right shaft for them over the internet is a tall, if not impossible, task. All driver swings are different, and there are so many options on the current market. Shafts are made with different flexes, lengths, weights, ...
Does tipping a shaft change the bend point?
Remember, though, that tipping a shaft will change the bend point, and it’s also irreversible, so make sure you know the purpose behind tipping your shaft. 2. Weight. The weight of a shaft has a similar correlation to performance as flex.
Does a high bend point lower or raise the ball?
According to Briand, a high bend point will lower ball flight and a low bend point will raise ball flight. So, if you tend to have a ball flight that’s too high, look for shafts that have a high kick point, and vice versa. It’s important to note that variations in length and shaft tipping will impact the designed bend point of a shaft.
How to measure golf shaft?
To properly measure a golf shaft, however, you will need to use a rigid measuring device, such as a 48-inch yard stick or a ruler taped to the end of a traditional 36-inch yard stick. Tape measures do not provide an accurate measurement.
How to measure a golf club with a yard stick?
Ensure the ruler is aligned to start at the 2- or 3-inch measurement with the end of the yard stick.
Do you need to know how long the shafts are on each club?
Before you attempt to install new golf shafts on your clubs, you will need to know how long the shafts are on each club. If you are paying a company or individual to install the new shafts, already having the measurements will help save time and get your clubs returned to you faster. To properly measure a golf shaft, however, ...
Where is the weight port on a golf shaft?
If the golfer does not wish to change grip styles, a weighting mechanism such as a weight port can be installed in the butt end (grip end) of the shaft and filled with tungsten powder to achieve the same results.
How to measure swingweight?
Step 1. Place the golf club in a swingweight scale. Make sure the butt end (grip end) of the golf club sits snugly against the end of the swingweight scale. A swingweight scale can be purchased from golf supply stores such as Golfsmith. Scales are available in a traditional style that uses a fulcrum to measure swingweight or in a digital format.
What is swingweight in golf?
Simply put, swingweight is the relative weight distribution between the clubhead end of the golf club and the grip end of the club. While most clubmakers recognize the importance of swingweight, most golfers without equipment expertise do not know how to measure it and how to adjust it if necessary. Swingweight is expressed with a letter-number ...
How to remove weight from iron clubhead?
To remove weight from an iron clubhead, use a grinder to lightly reduce the sole (bottom part of the iron). For every 2g of weight added to a clubhead, the swingweight will be increased by one swingweight point (from D3 to D4, for example). The opposite occurs when weight is removed from the clubhead.
What is the lightest swingweight scale?
Adjust the swingweight scale display if necessary to get the reading. The swingweight scale will show a reading from A0 to G10, with A0 being the lightest and G10 being the heaviest.
