How to measure the length of your driver shaft:
- Keep the golf club in the playing position such that the center of the sole is in contact with the ground.
- Position a 48” golf club ruler behind the golf club making sure the ruler tip touches the ground by the heel of the club. ...
- Measure the distance from the edge of the grip cap to the heel.
What is the standard length of a golf driver?
Standard Sizes of Golf Clubs
- Driver. Your driver is technically your most important club. ...
- Putter. Your putter isn’t much shorter than your average driver. ...
- Irons. FIrons are shorter because they’re meant for distance, not for height. ...
- Woods. All of your woods are likely longer than all of your irons. ...
- Wedges. Wedges follow similar reasons that woods do. ...
- Hybrids. ...
What is the Standard Shaft length of a golf driver?
The standard length for a male driver shaft used to be 43.5 inches for a steel shaft and 44 inches for a graphite club. However, in recent times, the standard driver length has been accepted as 45 inches. Typically, the length of a female golfer’s club is an inch lesser than that of a male golfer’s club.
What is the "ideal" driver shaft length according to height?
Today it is 45”, and some manufacturers have even gone to 45 1/2” as their norm. However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face.
What driver length should you play?
What Driver Length Should YOU PLay?
- Arm length and Posture. In both our BGF Fitting System and the TrueFitClubs Fitting Wizard, we use wrist-crease-to-floor measurement to determine a good length.
- Impact of Length on Shaft Weight. ...
- Impact of Length on Shaft Flex. ...
- The Short Answer is Shorter is Better. ...
- Driver Lengths for Popular Stock Clubs. ...
What length should my golf driver be?
The standard length of a driver for men used to be 43.5 inches with a steel shaft and 44 inches for a graphite shaft. However, in the 21st century a standard driver is considered to be 45 inches.
How do you know what length driver you need?
To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves.
What length should my driver be for my height?
Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021
Are shorter driver easier to hit?
It is easier to hit the center of the clubface with a shorter club than a longer club, therefore if you feel like you are struggling with your current driver here's a few things you can try before you cut that driver down or order a new one.
Do you lose distance with a shorter driver shaft?
The long and the short of it Your current length may be perfect for you. You may even need a longer one. But, as our experts and test have shown, a good number of golfers would benefit from a shorter shaft. You may actually increase distance and there's a good chance you'll hit more fairways.
Should I shorten the length of my driver?
When fitting a driver, it's important to get loft, lie, shaft, and grip sorted, but better driving may be hiding in a shorter shaft. In fact, a shorter shaft should help you find the sweet spot more often and may even add distance.
How long is DeChambeau's driver?
Bryson DeChambeau can only use a 48-inch driver when he's competing in Long Drive Association events. Golf's governing bodies announced a new “model local rule” available Jan. 1 that would limit the maximum length of all clubs except the putter to 46 inches.
Where should the ruler be when measuring golf driver shaft length?
Thirdly, you will place the straight edge ruler against the upright golf driver. The ruler should be vertical to the ground when you measure driver shaft length and the ruler should touch the top of the golf driver.
Why is it important to have the right length of golf shaft?
Having the right length for your golf shafts is so important because it helps with controlling the distance of golf shots. Additionally, a correctly fitting shaft length will help to develop consistency and confidence in your golf clubs.
How long is a golf club?
What Is The Length Of A Golf Club? For a driver the length can be up to 48 inches. However, the typical length would be around 45.5 inches. Other golf clubs in the bag are shorter than the driver and go down to around 35 inches for a lob wedge and 32 inches for a putter.
Why do you need to get fitted for golf clubs?
By having an accurate read of the length of the club you are able to hit shots more consistently which will help with better performance on the golf course. This is why getting fitted for golf clubs is a great choice if you are serious about improving your game.
Do taller golfers need longer clubs?
The longer your arms, the longer the clubs you will need – so a taller player will need proportionately longer clubs as well. For example if you are over 6 ft 2 there is a good chance that you would be better suited to using golf clubs for tall men oppose to using a standard golf set.
How long is a standard golf driver?
The standard driver length for men's clubs is 45.5" to 45.75" inches long. Because women tend to be shorter than men, the standard women's driver length is usually closer to 44".
How to find the correct driver for a golf club?
The best way to find the correct driver is to get fitted by a knowledgeable club fitter. A good club fitter will not only let you try out all the different driver heads and shafts they have available, but also let you try varying length shafts.
How Long Should Your Driver Be?
As we mentioned at the start of this article, the best driver for you has the optimal balance of distance and accuracy.
What is the loft of a Taylormade mini driver?
Mini-Drivers - TaylorMade's " Original One Mini Driver " has a standard length of 43.75", and it has a smaller head (275CC) at lofts of 11.5° and 13.5°. The loft can be adjusted by 2°, allowing it to go as low as 9.5°. Compared to a standard driver head, many golfers will find the TaylorMade Mini to be playable off the ground (depending on the loft).
How long is a 3-wood driver shaft?
Thirty or more years ago, the standard shaft length for a driver was closer to what we see in 3-woods today, around 43 inches.
What is a 2 wood golf club?
The "2-wood" in this setup will be more of a "fairway finder." The goal is to minimize distance lost compared to your standard driver configuration while significantly tightening the dispersion of your shots. This club will generally have a shorter shaft and more loft.
When you add or remove inches from a driver shaft without making any other adjustments to balance the weight of the club answer?
When you add or remove inches from a driver shaft without making any other adjustments to balance the weight of the club, the swing weight will change .
What is distance in golf?
Distance: Quite simply, the maximum distance that you can drive the ball. Since clubs are designed within half an inch of each other, the adjustments are small, but the overall force changes dramatically. This is relevant to your arm length and size when swinging. A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club. This increases the ball’s velocity upon impact, and you can hit it farther.
How does a lengthened golf club work?
A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.
When do You Need Custom Golf Clubs?
When you can’t seem to find a 9 iron or a putter that’s designed for your height. Using the information that we provided above, you can determine your
Why do you need to lengthen a golf ball?
The length is to compensate for the lighter head. You can’t lightly tap the ball in if the head is heavy and the shaft is short.
What happens if you use too long golf clubs?
If you’re using clubs that are too long for you, you’re going to have a rough time closing the gap between your tee and the hole. If it’s too short, you’re going to hit it too fast without proper form.
When shortening a golf club, do you have to remove the crown?
When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.
Why is a longer club length better?
More momentum. A longer club length (and your driver should be one of your longest) is going to give you more momentum on the downswing, allowing you to really hit the ball far.
What should be considered when choosing a driver shaft length?
Height and wrist to floor measurements are two factors that should be considered when choosing the right driver shaft length for you. In general, taller golfers should play longer driver shafts, and shorter golfers should use shorter ones. All golfers have a different posture, which means you should also factor in the height of your wrists when addressing the ball.
What is the Standard Driver Shaft Length?
Generally speaking, the standard men’s driver shaft length is 45.75″ off the rack with no customizations. Standard women’s driver shafts are between 43.75″-44.75″. These are averages and can vary plus or minus 1″ depending on the manufacturer.
How tall is the shortest driver in golf?
As a general rule, taller golfers will need a bit longer of a driver shaft. For example, PGA phenom Rickie Fowler is only 5’9″ and swings one of the shortest drivers in pro golf at 43.5 inches. Tony Finau is one of the tallest golfers on the PGA Tour at 6’4″, and his driver’s length is usually around 45 inches.
How many yards does Finau drive?
Both Finau and Fowler are two of the longest drivers on the PGA Tour. Finau currently averages about 305 yards off the tee, and Fowler clocks in at around 301 yards! This proves that it is possible to hit your driver a long way regardless of what the shaft length is.
Why should I shorten my golf driver?
Another great reason to shorten the length of your driver is the added confidence it could bring. I have personally experimented with a driver that is half an inch shorter and can attest that the increased accuracy increases my confidence while on the tee box. Even if I give up a tad bit of distance, it is worth it to my overall golf game.
Why is it difficult to recommend a specific shaft length for a driver?
It is difficult to recommend a specific driver shaft length because so many factors are involved in making that decision. A golfer’s height, muscle strength, and swing speed must be considered when deciding on shaft length. A club fitting pro will want to know all of these factors before recommending a specific shaft length for your driver.
What does it mean when a driver's shaft is longer?
When considering a change in your driver’s shaft length, remember the old ‘risk/reward’ adage. A longer shaft will usually mean longer drives , but it also results in less accuracy off the tee. Remember, you never want to sacrifice too much accuracy because that can lead to higher scores and the dreaded ‘double bogey blues.’
How to determine driver length?
To determine your optimum driver length, look at where you hit the ball on the face of your driver. If your hits are mostly towards the heel, your driver is too long. Another possibility is that the shaft is too light. Try choking down on the shaft and see if your contact improves. If you have difficulty seeing where your ball makes contact on ...
How long is a golf driver?
In our experience over the last twenty years, we have seen off-the-shelf driver lengths go from 43 inches to 48 inches, the maximum allowable by the USGA, and back to somewhere around 45 inches. The holy grail for most golfers is increased distance off the tee. With the USGA governing the rebound effect off the face of the driver (CT), it seems logical that adding length to the driver creates a longer swing arc and therefore more club head speed. But, if you do not hit the sweet spot on the face of the driver, you will actually LOSE distance because the efficiency (smash factor) will drop and you will generate less ball speed. In fact, the winner of the 2018 Masters used a driver that is 44.5 inches long and the 2nd place finishers driver length was 44.5 inches as well. Check out our list of 2018 stock drivers at the end of this blog.
Why is it important to have a shorter driver?
For most golfers we fit, a shorter driver creates more consistent contact on the face and actually helps not only gain distance but accuracy and consistency. In our opinion, driving for show is fine if you can hit great shots out of the rough or from behind a tree. If your fairways hit are less than 50% and you have an OB or two off the tee during a round, it is time to get your driver fixed!
How much heavier is a golf driver shaft?
If you are playing a shorter driver, say 44 inches instead of the “standard” 45 inches, you should consider a slightly heavier shaft, say 10 grams heavier. This will help create a more balanced feel and gain back some of the swing weight lost when cutting down the length of the club.
Should you go shorter or longer in flex?
As you go shorter in length, you should consider a slightly softer flex. Also, if you go longer in length you should consider a slightly stiffer flex. Our BGF Fitting System and TrueFitClubs Fitting Wizard take this into account when making our initial recommendations.
Does adding length to a driver increase swing arc?
With the USGA governing the rebound effect off the face of the driver (CT), it seems logical that adding length to the driver creates a longer swing arc and therefore more club head speed. But, if you do not hit the sweet spot on the face of the driver, you will actually LOSE distance because the efficiency ...
How to measure wrist for golf club?
Step 2. Stand with your hands hanging loosely by your side. Have your assistant measure the distance from where your wrist hinges to the ground, going straight down. This is your wrist-to-floor measurement. Step 3. Use the "Golf Club Measurement Guide" (see Resources).
What golf clubs do you need if you are shorter than the beginning height?
If you are shorter than the beginning height on the club measurement guide, then you will need to purchase "Ladies Junior" or "Petite" golf clubs.
What is the average size of a golf club for women?
As a result, the standard size of golf club for women is shorter in length and is designed for women that are between 65-inches (5'5") and 69-inches (5'9") tall. For women who are shorter than 5'5", golf manufacturers produce a "petite" golf club that is both shorter and lighter than the standard length club.
What is the best length for a golf driver?
That may end up being the current industry standard of 45” for some players, or it may actually be something a bit shorter for others.
How to determine the length of a golf club?
The first step in figuring out your proper club length is to start with your overall height measurement. This is the most basic method of identifying the proper club length you’d need, but by itself, does not offer enough information for an accurate determination. In the normal club fitting procedure, a player’s overall height is used, but only as part of the complete process of fitting a golfer for club length.
Why is Fitting for Length Important?
It can lead to subconscious swing compensations that can result in inconsistent ball striking.
Why are static measurements considered a club fitting?
The two prior measurements discussed are considered “static” methods of club fitting because the measurements are performed while the player is standing still. Professional club fitters will often supplement these static measurements by incorporating an additional element into their club fitting sessions, a process that is considered “dynamic.” In a dynamic club fitting, a player will be evaluated during the course of their actual swing motion, with measurements taken at impact and by observing ball flight.
Why take length off of a shaft?
The effect of taking length off of a shaft will be to effectively increase the stiffness of its flex. How much it increases stiffness will depend on from which end of the shaft the trimming is done.
Why is wrist to floor measurement important?
The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.
How important is shaft length in golf clubs?
The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.
