how to determine what golf clubs are right for you

How to choose the right golf clubs for You?

When deciding which golf club number (3, 5, 7 etc) to purchase, think of the following: The higher the golf club number, the higher the loft. The higher the golf club number, the shorter the club shaft length. Wood Shafts. Golfers have a choice of graphite or steel shafted woods:

How are golf clubs measured?

Mar 18, 2022 · Wrist-to-Floor Measurement. The wrist-to-floor measurement is a common, frequently-used metric for determining correct club length. The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.

How to tell if a golf club is right or left-handed?

Step 1. Decide on what shafts are best for you. You must choose between shafts made of graphite or steel. Steel shafts are somewhat less expensive, and if you are a better golfer than …

Are your golf clubs the right length for You?

Decide on your shaft flex. Shafts generally are made of stainless steel, graphite or titanium. "Flex" refers to the ability of a golf-club shaft to bend as forces are applied to it during the...

How do I know which golf clubs are right for me?

A good rule of thumb in choosing the right flex is how far you can hit a driver on the fly. If you hit it 180 yards or less, buy Senior flex. If you hit it 20 yards farther, pick Ladies. And if you can hit the ball 225 to 250 yards, you're ready for Normal flex shafts.

What is the right size golf club for me?

1. Measure Your Overall Height (i.e. “static” fitting)OVERALL HEIGHTGOLF CLUB LENGTH ADJUSTMENTS5'4″ to 5'7″minus 1/4″5'7″ to 6'1″standard length in inches6'1″ to 6'2″plus 1/4″6'2″ to 6'4″plus 1/2″7 more rows

What is the standard length of a 7 iron?

Standard Club LengthClubMen GraphitMen SteelWood 7#, 9# usw.4140,5Iron 3#39,539Iron 4#3938,5Iron 5#38,53828 more rows

How long should my 7 iron be?

So, as an example, where a man's standard 7-iron length may be 37 ¼”, a women's standard 7-iron would be approximately 36 ¼”. So, when making length adjustments for women, keep in mind that the shaft changes you make are measured as additions or subtractions to this shorter women's standard for club length.Mar 17, 2022

Are All Golf Clubs The Same Size?

Not all golf clubs are the same size. Part of what helps golfers get distance is by varying the length of the golf club shaft. The longer the shaft...

Why Do Golf Club Sizes Matter?

Golf club sizes can make all the difference in your ability to perform on the golf course. If a golf club is too long or too short for you, then th...

Are Custom Fittings Worth It?

Custom golf fittings will tell you the exact sizes that you need for each of your golf clubs. Knowing the proper golf club sizes will ensure that y...

Can I Adjust My Own Golf Club Sizes?

If you find that your golf clubs are not the exact length you need, you can adjust them by cutting or extending the clubs and then regripping them....

Why are golf clubs not fitting?

Having golf clubs that are not properly fitted for length can be a major contributor to inconsistent performance. For the same reasons that someone who is 6’ 5” wouldn’t walk into a men’s clothing store and buy a suit off the rack, golfers need to make sure that the golf clubs that they buy are suited to their body type and size.

How important is shaft length in golf clubs?

The length of the shaft in your driver is extremely important, as it plays a big role in determining how fast you can swing the club, the club’s path and angle of attack and, ultimately, how well you’re able to make center-face contact.

What does a professional club fitter do?

Professional club fitters take a number of factors into consideration as they assess the club specification requirements of each golfer. Specifically as it pertains to club length, they will look at a couple of static measurements, and they will also conduct a “dynamic” fitting assessment:

Why is wrist to floor measurement important?

The reason it is so pervasive in club fitting is because it adds an additional layer to the measurement, which improves its accuracy.

Why is playing with clubs too short bad?

Playing with clubs that are either too short or too long can cause a golfer to change their stance or swing in ways that could negatively affect the outcome. It can lead to subconscious swing compensations that can result in inconsistent ball striking.

What happens if a golfer has a short club?

If a player has clubs that are too short, they will usually bend over too much from the waist in their address position. Conversely, clubs that are too long will require the player to stand too erect. Both of these subconscious adjustments could potentially make their swing motion less effective than it should be.

What is the most important factor in creating distance with the driver?

However, studies have shown that the single most important factor in creating distance with the driver is not the length of the shaft, but rather the golfer’s ability to hit the ball on the sweet spot of the club face. So, while shaft length is important in generating distance, there is a point of “diminishing returns.”.

What factors affect the size of a golf club?

Here’s another factor that affects the appropriate golf club size. The angle and the grip size of the club are as important as the height and wrist-to-floor measurements . However, this means more to serious professional golfers than to someone just starting out.

What is the difference between men's and women's golf clubs?

The difference between men’s and women’s clubs is generally noticeable on the grip. Men’s golf clubs have larger grips and are also about 2.5 cm longer than women’s golf clubs. Kids’ clubs are even smaller than women’s for the most part. Knowing what type of golf club you need is the first step in determining the appropriate size.

Why do manufacturers make golf tables?

Manufacturers create such tables to help everyone from beginner golfers to pro golfers choose the right club size for their play. Here’s how your size affects the dimensions of your needed golf club size and why it matters. Last but not least, the grip size should also be determined for the club to fit perfectly in your hands.

How tall is a golf club?

Manufacturers usually make clubs to account for golfers anywhere between 4’8” to 6’7” inches tall. The second measurement is wrist-to-floor distance. This is done by standing on a flat surface with your arms relaxed and pointing down. You then measure the distance between the ground and the line where your wrist meets your hand.

What is plus and minus golf clubs?

The adjustments on a size chart are made with reference to the standard clubs. Therefore, the plus and minus values show how much shorter or longer your golf club should be compared to the standard, according to your measurements, ...

What is the second measurement of a grip?

The second measurement is the length of your middle finger from the tip to its base. When you have these two measurements, you can then find the appropriate grip size on a manufacturer’s size chart. Note that we only use the middle finger as an example as it applies to most people.

Can you play golf with an off size club?

Because there are plenty of variations, it’s unsurprising that a lot of people sometimes play with off-size clubs. Most pros recommend that even beginners should opt for a perfectly sized golf club in order to have the best learning experience.

Mind Your Height

First, you need to consider your height when buying golf clubs. This will basically serve as the backbone that will help you determine the right shaft length for your clubs. Without it, you won’t be able to get fitted properly.

Do Wrist-to-Floor Measurements

But your height in itself can only provide an incomplete estimation when determining the right shaft length for you. To complete the process (and get the most accurate calculations), you need to factor in your wrist-to-floor measurements as well.

Consider Club Type

Bear in mind that the optimal length will vary based on the type of golf club. Take woods or drivers for example. Aside from the swings, shaft lengths also affect its path, and attack angles. Moreover, it will impact how well you make center-face shots.

Check Effects on Shaft Flex

Having the length modified to suit your needs can significantly help you improve your game play. Nevertheless, you should be aware that doing so can affect the shaft’s overall flex, which is also important if you want to excel at golf.

Use Clubs With the Right Shaft Length

Shaft lengths are extremely important, especially since it affects the quality of your swings. Plus, the longer the shaft is, the faster the club head speed will be. So best get the clubs that are long (or short) enough for you.

What are the elements of a golf club?

To narrow down your choices, there are only three elements of any club that are important: the shaft, the clubhead and the grip. But within each category are alternatives, and there are a few basic things you should know about what's available.

What shafts are best for golf?

Decide on what shafts are best for you. You must choose between shafts made of graphite or steel. Steel shafts are somewhat less expensive, and if you are a better golfer than average, steel shafts are probably the ones you should have. But if you're just starting out or your game needs work, you probably will do well to buy graphite shafts ...

How far can you hit a golf ball with flex shafts?

If you hit it 20 yards farther, pick Ladies. And if you can hit the ball 225 to 250 yards , you're ready for Normal flex shafts. Only some of the playing professionals should choose Extra-Stiff shafts because they can hit the ball 300 yards or more.

What are golf grips made of?

There are grips made of rubber, leather and synthetic materials , and even grips with fabric interwoven in them to stay tacky even in the rain. Since your only contact with the club is your grip, don't discount its importance.

Why do you need graphite shafts?

But if you're just starting out or your game needs work, you probably will do well to buy graphite shafts for these reasons: First, they are lighter, so they are easier for you to swing. Second , graphite shafts tend to twist in your hands less so you will hit more accurate shots.

How far can you hit a driver on the fly?

A good rule of thumb in choosing the right flex is how far you can hit a driver on the fly. If you hit it 180 yards or less, buy Senior flex. If you hit it 20 yards farther, pick Ladies.

How does the length of a golf shaft affect the accuracy of a shot?

The length of the shaft will effect the distance of your shot, accuracy and even your swing plane. Longer-shafted clubs will change the arc of your swing. If you have a smooth, consistent swing, you might consider going with a longer shaft because the change in arc will add to the clubhead speed at impact and add distance to your shots.

What is a golf club shaft flex?

"Flex" refers to the ability of a golf-club shaft to bend as forces are applied to it during the swing.

What are the different shaft flex ratings?

There are five ratings for shaft flex: extra stiff, stiff, regular, seniors and ladies. The general guideline for choosing a shaft is the longer you hit your drives, the stiffer the shaft you require. Visit your local golf shop to have your swing speed analyzed.

Can you square a clubhead with a longer shaft?

If, however, you struggle to maintain a consistent swing, using a longer shaft likely will only add to your troubles, making it more difficult to square your clubhead at impact. Have a golf pro analyze your swing to help determine what shaft length you require.

How tall should a golf club be?

The table below tells you how much you should add or subtract to this length. Height Range, Golf club length to use. 6ft 9″ – 7ft 0″, Add 2″ to Standard Length.

What happens if your golf clubs are too long?

If alternatively, your clubs are too long for your height, your swings and strikes will be slower and less accurate . Here’s how to know what size golf clubs to buy. Your golf clubs are too short if, You have to bend your waist and knees more than is necessary to achieve the right angle. Have an in-to-out swing path.

Why do pro golfers use longer drivers?

Pro golfers use longer drivers because they have perfected their control abilities and maximized their club head speed. Until you have perfected these two factors, it is advisable to stick to the recommended shaft length for your drivers. The Best Golf Club Size for Putters.

Why is my golf quest cut short?

Millions share a deep passion for playing golf but your quest to become better may be cut short because you’re using golf clubs that are wrong for your height. When you are a novice, golf can seem a tad bit complicated. The different types of golf clubs all look the same at first.

What is the average putter shaft size?

The average putter size for a player whose height is average ranges between 32” and 35”.

What is a putter in golf?

The putter is the club in your pack that enables you to get the ball in the hole. The goal in any successful game is to get the ball in the hole with as few strokes as possible. For a golf putter to work for you, it has to be the right length for your height.

Do pro golfers use hybrid clubs?

Contrary to many people’s opinions, pro golfers use hybrids a lot. Hybrid clubs have longer iron shafts than standard-sized golf clubs. Hybrid clubs could be where the solution to most if not all of your problems at the golf course lies. For example, they can help you hit higher. Listen to your gut instinct.

Why are golf clubs made the way they are?

The reason clubs are made the way they are is to gather momentum as you swing down. If your club is too short, you’re going to build momentum while having resistance, meaning you will push too hard against the wind and not just swing naturally. There’s not enough weight to the club.

How does a lengthened golf club work?

A longer distance can be achieved with a lengthened club if you have the ability to swing it with the same force and speed that you did with a shorter club . This increases the ball’s velocity upon impact, and you can hit it farther. Flex: The flex of the shaft will be altered. This happens for a few reasons.

Why do you have to swoop on your golf club?

Because the club is longer, you have to swoop on your downward swing, causing the force of your wood – if you’ve hit it correctly – to be applied to the bottom of the ball and send it upwards. A wood without enough length just doesn’t cut it. You’d be sending the ball higher but with almost no distance.

What happens if you play too long in a golf club?

If the club is too long for you, then you’re spending extra time during ramp up which is the amount of time spent during your initial downswing. You want a balance between your abilities, ramp up, and momentum while cutting through the wind with as little resistance as possible.

When shortening a golf club, do you have to remove the crown?

When you shorten a golf club, you have to remove the crown, and safely disconnect the shaft from the head.

Why did Lars start golfing?

Father of six and long-time golfer, Lars started golfing because of a summer job when he was nineteen, where he caddied for a Virginia state official. From that moment on, he fell in love with the sport, and made it a core staple in his life. Thirty-five years later, with thousands of games under his belt, he’s here to teach you the fundamentals and master techniques of golf, while recommending proper golfing gear and equipment for every step in your journey.

Why is my driver heavier than my wedge?

That’s because the head is a little heavier to account for the extra force it takes to send your ball as far as it goes. During your driver shot, you should send the ball farther than any other point in your round of golf.

How to tell a left handed golf club from a right handed golf club?

Club heads. One of the easiest ways to tell apart a right-handed golf club from a left-handed one is to observe the clubface. Start by setting the club head of a golf club on the ground (or a flat surface), and keep the clubface directed towards you. If the hosel is angled to the right, then you’re holding a right-handed golf club.

How to decide which golf club orientation suits you better?

If you’re trying to decide which golf club orientation suits you better, the first thing you need to do is get yourself to the gold course and try out both types of clubs. Nothing will help you decide better than your own preference, but you can try out the following trick to reassure yourself.

What is the difference between a left handed and right handed golf club?

Similarly, a left-handed golf club will have a hosel (where the club head is attached to the shaft) angled to the left. This way, a player using a right-handed golf club will stand on the right to hit the golf ball, and a player using a left-handed golf club will stand on the left. Remember, it’s all a matter of perspective.

What side of the ball do you hit in golf?

The game of golf is unique in many ways. One of them is how golfers swing a club. To hit the golf ball, a player can stand on the left or the right side of the ball, depending on the situation. That means a clubhead has to be constructed to suit both right and left-handed players.

How to tell if you are left or right handed?

You can achieve this by standing in an upright position, with your legs placed close to each other, and then ask a friend to give you a slight push from the back. The leg that you use first to gain your balance will tell you are right or left-handed.

Which hand do Southpaws play golf with?

As far as assumptions go, you would assume southpaws to favor playing with the left hand in golf, but that’s not always the case. Typically, factors like the dominant eye and eye-to-hand coordination play a big role in deciding how a player will choose to swing the club. In short, to play golf proficiently, you have to be aware ...

Is a putter right handed or left handed?

That’s mostly because putter shafts are bent, and therefore have to be designed to either be right-handed or left-handed. Conversely, all other golf clubs have no distinct difference in constructional orientation, except when it comes to the club head. In truth, no other component of a golf club (except for putters), be it shafts or grips, ...

How to measure the length of a golf club?

In order to determine the length of your club, stand tall and get someone to measure from the crease where your wrist and hand meet to the floor. Do this with both hands and take an average of the two measurements.

What is the first thing to decide on golf shafts?

The first thing is to decide is what type of golf shafts you would prefer, followed by shaft flex, kick-point, torque rating and length. Each of these different aspects of golf club shafts that can influence the performance of your club, and each must be carefully considered before you put in an order. Read on to find out all about how ...

How long should a 5-iron shaft be?

The following lists what length of shafts you should consider for certain heights. If the crease where your wrist and hand meet to the floor is: 29 to 32 inches = irons should be based on a 5-iron of 37 inches. 33 to 34 inches = irons should be based on a 5-iron of 37 1/2 inches.

How much does graphite shaft weigh?

Graphite shafts are much lighter, less durable and more expensive in comparison to steel shafts, and weigh between 50 and 85 grams – around half the weight of a steel shaft! These light-weight shafts help to provide a greater swing speed for more power, however, it sacrifices control due to the flex generated in the swing.

What is the difference between steel shafts and graphite shafts?

Steel shafts are much heavier, more durable and are generally less expensive than their graphite counterpart s. They are often made from carbon steel, but stainless steel is sometimes used, and start at 120 grams.

What is the kick point of a golf shot?

The shaft kick-point – also known as flex-point – is the point where the shaft bends and affects the trajectory of the shot. Although the effect is only small, it is still measurable.

What is flex in golf clubs?

Put simply, the flex determines a golf club shaft’s ability to bend during a swing, affecting the distance and direction. Therefore, getting the right flex in your golf clubs is important.

Mind Your Height

• First, you need to consider your height when buying golf clubs. This will basically serve as the backbone that will help you determine the right shaft length for your clubs. Without it, you won’t be able to get fitted properly. The table below lists some of the recommended shaft length based on your height. You can refer to it whenever you’re out b...

See more on golfreviewsguide.com

Do Wrist-To-Floor Measurements

Consider Club Type

Check Effects on Shaft Flex

Use Clubs with The Right Shaft Length