Switch off the car with your key Set forward or reverse to neutral Now find out the run or tow switch and put it to tow
Full Answer
How do I identify my Cushman golf cart?
You should have no problem identifying the model and year of your rare cart. The Cushman Motor Company was established in 1901 in Lincoln, Nebraska, and after changing hands with several owners, ceased production of the golf cart in 1975. The crucial numbers found on the Cushman vehicles is the MODEL number and the SERIAL number.
When did the Cushman golf cart go out of business?
The Cushman Motor Company was established in 1901 in Lincoln, Nebraska, and after changing hands with several owners, ceased production of the golf cart in 1975. The crucial numbers found on the Cushman vehicles is the MODEL number and the SERIAL number.
How to remove a clutch from a golf cart?
Before beginning the golf cart clutch removal of either clutch, you must first remove the drive belt. At rest, it is loose enough where you can just work it over the clutches. Once removed, you can then remove the drive clutch. Using an air gun, remove the center bolt and centering washer from the drive clutch.
Can You disconnect the backup buzzer on a golf cart?
Unfortunately the buzzer noise on a golf cart can quickly become an unbearable annoyance. If you are one of the many golf cart owners who are suffering due to this loud noise, you’ll be happy to know that you can disconnect the backup buzzer on the cart.
Why won't my golf cart go forward or backwards?
The problem could be with either the Run/Tow switch or Forward/Reverse switch or both. Check the switches to ensure that they aren't stuck midway. If they are, getting them released should help. However, if they show signs of wear and tear, you must get them replaced.
How do I get my golf cart out of park?
Hold your stop brake as you engage the parking brake. Pull the parking brake handle up into a locked position. Get out of your cart after turning it off.
How do you put a golf cart in tow mode?
To tow an EZGO golf cart, use the Run-Tow switch to set your golf cart into Tow mode. This will allow you to tow your golf cart. Almost all golf carts have a Run-Tow switch that helps to switch the cart from Run mode to Tow mode and vice versa. The cart must be set to Tow mode when it cannot move with its power.
Why is my golf cart locked up?
Why Do Golf Cart Brakes Lock Up? Golf cart brakes can start locking up when the brake cable gets stuck, or when the bolts on the lift kit are loose. The brake cable gets stuck because of a binding, resulting in a mechanical linkage. One or more parts of the pivot assembly have rusted.
How do you tow a dead golf cart?
Any time your golf cart needs towed or dies, you must use the “tow-run” switch on the cart and switch it to the “TOW” position. You can typically find the tow-run switch inside of the battery compartment of the golf cart in plain sight.
How do you put a club car in neutral?
0:151:07PRO TIP - Putting a Club Car DS Golf cart (Gas) into Maintenance ModeYouTubeStart of suggested clipEnd of suggested clipOkay here's a quick tip anytime you're working on a club car especially on the on the club card DXMoreOkay here's a quick tip anytime you're working on a club car especially on the on the club card DX there's a little yellow switch. Right here see when this is in neutral you push the gas.
Where is the tow switch on my golf cart?
The tow run switches are typically found inside the battery compartment of the cart in plain sight.
What happens if I tow my golf cart in run mode?
First of all, leaving your cart in run mode during storage will cause your battery to slowly drain, as your cart's computer and its regenerative braking system will be active, causing a slow drain that will leave your battery dead after a long-term storage situation.
How do you tow a gas golf cart?
0:582:017F Towing - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnder the seat into the toe position. This will allow the rear wheels to freely roll. Once allMoreUnder the seat into the toe position. This will allow the rear wheels to freely roll. Once all vehicles are connected disengage the parking brake of each vehicle that is being towed.
How do you push an electric golf cart?
Release Motor Brake On An EZGO RXV When Batteries Are DeadPut the golf cart key in off position.Lift the front seat.Switch the golf cart tow/run switch to tow.Lift the cover around the tow/run switch.Identify wires that are labeled 1, 2, 3 & 4.1 is connected to 2 and 3 is connected to 4.More items...
How do I unlock my EZ Go golf cart?
0:441:49How to disengage E-Z-GO RXV intellibrake - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome more difficult another. Pull out the rivets. It's tucked underneath like that. These twoMoreSome more difficult another. Pull out the rivets. It's tucked underneath like that. These two connections right here labeled one two four and three you're going to unplug them and switch. Them.
Where is the reset button on a ezgo golf cart motor?
Locate the motor Remove the panel so the electric motor is visible. Electric motors usually include reset buttons that can perform similar to circuit breakers. Look in the area where several electrical wires enter the motor and locate a small red button. This is the reset button.
How to change the speed of a golf cart?
Locate the spring on the differential or carburetor that helps in changing the cart speed by adjusting its tension. Increase the length of the cable that is fitted on to the body of the throttle and clutch of the two-stroke engine.
How to ride a golf cart at full speed?
Ride the cart at full speed over a course of known length. This will ensure that the governor controls the speed of the cart within factory specifications. Fasten the black plastic cover and put the seat back in place. Take care when tightening the nut. The more you tighten, the faster your cart will go.
How to start a golf cart with a gas pedal?
Locate the gas pedal that is fitted to the governor and remove the connection. Re-route the gas pedal to the carburetor. Remove the bolt present on the shaft of the gas pedal. Slide the shaft upwards so that the gas pedal has more play. Tighten the bolt and start the golf cart.
How fast is an EZGO golf cart?
The top speed of an EZGO golf cart is usually 19.9mph and the average speed is 14mph to 15mph. With governor adjustment, the EZGO cart can go faster by 5 to 10mph.
What is a golf cart governor?
A golf cart governor is a mechanical device that helps in controlling the maximum speed of the cart when it moves on flat ground. This device prevents the engine RPMs from increasing beyond the recommended specifications.
Where is the governor arm on a golf cart?
Locate the governor arm of the golf cart. This is mounted above the rear axle housing and under the cart. Depending on the cart model, there may be a protection plate above the governor.
Can you remove a golf cart governor?
It doesn’t take much time or skill to remove a golf cart governor. With some basic mechanical expertise and general-purpose tools, you can do this yourself. The process is more or less the same in all golf carts.
CVT Components
On a golf cart, the CVT is comprised of three parts; the drive clutch or primary clutch on the engine, the driven or secondary clutch on the differential, and the belt which connects the two. As the rpms of the engine increase, the drive clutch spins with it and with the use of flyweights and centrifugal force, the clutch pulls inward on the belt.
Drive Clutch
Let’s start with the removal of the drive (primary) clutch which is mounted on the crankshaft sticking out of the engine. Before beginning the golf cart clutch removal of either clutch, you must first remove the drive belt. At rest, it is loose enough where you can just work it over the clutches. Once removed, you can then remove the drive clutch.
Driven Clutch
As for the driven or secondary clutch, although it may seem easier to remove, it is often the hard one to tackle. When the bolt is removed from the center of the driven clutch, there is literally nothing else holding it on. It is not generally a tapered fit like is used on the drive clutch.
What happens when you put a golf cart in reverse?
When you move the golf cart in reverse, a voltage will be sent from the F/R switch to the controller. This voltage will sound the buzzer and send the reverse current to enable the cart to move backward. If the cart is moving in reverse but the buzzer is not sounding, then the issue lies with the controller.
How to disconnect the buzzer on a Yamaha golf cart?
If you wish to disconnect the reverse buzzer on a Yamaha model golf cart, locate the buzzer found below the cup holder. You will have to lift the seat and the cup holder to locate it. The buzzer will have a green and black wire attached to it. You can disconnect this wire to stop the buzzer noise.
Why is my golf cart buzzer not working?
The most common cause of a reverse buzzer not working on a golf cart is will be due to a fault with the controller. Check if the orange and white wire running from the buzzer has continuity and current runs through it. You can use a voltage meter to verify this. Next check if the voltage reading is 0 V.
Where is the buzzer on a club car golf cart?
On a Club Car Golf Cart, the reverse buzzer can be found behind the cart seat. Remove the seat and you will be able to locate the buzzer. Verify whether all the wires connected to the buzzer are properly in place. This issue can be caused mostly due to disconnected wires. Reconnecting them can fix this issue.
Where is the backup alarm on a Yamaha golf cart?
The backup alarm in a Yamaha golf cart is generally located behind the seat. Removing the cup holder and raising the seat will give you access to the backup alarm. The alarm will have green as well as black wires running from it. This will be an easy identification that you can use to locate the backup buzzer.
What is the difference between a white and blue wire on a 48V switch?
The white wire will be used at the bottom and the blue one at the top of the switch.
Where is the key switch on a golf cart?
The key switch panel is located on the right side of the cart opening. The reverse buzzer on a EZY go golf cart is located behind this key switch panel. It is very easy to access this panel. You can locate this quite easily and get started to resolve the issues that you are facing due to the buzzer.
What year did Cushman make the golf cart?
1949 – 1954 Golf Buggy. In 1950 Cushman introduced their first three-wheel golf cart called the Golf Buggy. This was essentially a modified Model 60, powered by a scooter engine.
Where is the model number on a Cushman golf cart?
The crucial numbers found on the Cushman vehicles is the MODEL number and the SERIAL number. The Model Number is usually located under the seat on the driver side ...
What engine did the 1968 Town and Fairway have?
This version came in either 36 volt electric or with a 10hp Kohler K241 engine .
What was the first four wheeled golf car?
In 1968 Cushman debuted their first steel body four-wheeled golf car, the Gran Cushman Golfster model GC-400 as well as the three-wheel model GC-300. Both models were either gas or electric. The gasoline GC400 used a Kohler 10hp model 241 while the GC300 had a Kohler 8hp model 181 until 1972 when they came with the 10hp 241. The GC400 kept the 10hp until 1974 when they installed the 12hp Kohler model K301400.
When did Ransomes stop making golf carts?
Management decided to leave the golf cart market and concentrate on building industrial vehicles. Ransomes Ltd. purchased Cushman by in 1989, and Ransomes was in turn acquired in 1998 by Textron, owners of EzGo. All golf cart production ceased on June 27, 1975.
What engine did the Scotsman have?
Scotsman 1964-70. Cushman produced the series 736 Scotsman model 881009 from around 1964 to 1968. This model came with an 8 HP Kohler engine. In 1969 the Scotsman model 898105 was introduced and came with a 5 HP, 14.1 cubic inches, four-cycle Briggs and Stratton engine.
What was the Cushman Motor Company?
Cushman Motor Company was, as the name implies, mainly in the business of building motors for farm equipment and industrial applications.
