A simple way to pull a steel shaft out of your clubs is with just your hands and a torch. It’s important to remember that the club head and the shaft are going to get pretty hot so you need the proper materials to handle the heated metal. I’ve done this with welder’s gloves and thick towels wrapped multiple times.
Full Answer
How do you shorten a golf club shaft?
With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
How do you fix a loose grip on a golf club?
To do that, the DIY golfer will have to: Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.
Can you extend a golf shaft?
Extending a golf shaft is a useful technique to have if you are buying used clubs, or if you are experimenting with different club lengths. If you know how to cut a golf shaft or how to extend it, you don’t ever have to worry about purchasing the correct length of clubs on Ebay or other used club marketplaces.
Why do golfers cut down shafts and reinstall them?
But some do-it-yourself golfers also cut down golf shafts, then reinstall them in their clubs. They do this to make their clubs better fit their swing, which might mean cutting the shaft simply to change length, or to change swingweight, flex or other playing characteristics.
How far should a dowel go in?
We recommend placing the first dowel at least 27 mm from the front and back. The distance between the pins is arbitrary. Remember that long distance between the pins usually means your joint won't be strong enough. We recommend creating a distance of 65-100 mm.
How thick should wood be for dowels?
Diameter: Ideally, the diameter of the dowel should be approximately 1/3 – and never more than 1/2 – of the thickness of the wood being joined. For example, if your product is 1” thick, you should be considering a dowel pin 3/8” in diameter. If your product is 1-1/4” thick, a 7/16” diameter would be more suitable.
Should dowel be bigger than hole?
Here's an easy way to make sure that the dowels fit snug. For a 1⁄ 4 " dowel, for example, drill a 1⁄ 4 " hole in scrap. Test-fit the dowel in the hole. If tight, chuck a maximum 6"-long piece of dowel in your drill.
How do you install a dowel joint?
Edge joints step-by-stepMark dowel locations. Cut the boards 1-in. extra long and butt them together. Mark dowel center lines 2 in. from each end and 8 to 12 in. ... Drill dowel holes. Align the jig with the center lines and drill. Control the hole's depth using a stop collar. Glue dowels into one set of holes.
Which is stronger dowels or pocket holes?
The dowel joints were 1.5x stronger than the pocket hole joints.
Should dowels be glued?
0:021:01Using Titebond with dowels for joinery - YouTubeYouTubeStart of suggested clipEnd of suggested clipDowels are an easy and convenient way to join wood. Together but there's a technique to adding theMoreDowels are an easy and convenient way to join wood. Together but there's a technique to adding the glue the first thing we want to do is add a little glue to the face of our joint.
How do you secure a dowel rod?
1 AnswerWith an undersized pilot hole, or no pilot hole at all, screw a small wood screw into the center of the end grain on the outer side. This will push the wood fibers out, expanding the dowel diameter in the mortise, and compress the dowel into the mortise.Use a wedge or two to accomplish the same thing.
Should the dowel hole be the same size as the dowel?
The holes are typically the same size as the dowel. Dowels are usually compressed wood, compressed in such a way that it leave lengthwise grooves in the sides all around. These grooves serve as a relief for the glue when the dowels are inserted, both dowel and hole should be coated.
Is a dowel joint strong?
Dowel Joint Advantages: Dowel jointing is a fast process (once you get the hang of it) They provide you with a much neater, flusher finish than nails or screws would. There's no need for screws or nails. When it comes to woodworking, dowel joints are the strongest type of joint.
Are dowel joints stronger than screws?
Dowels are stronger than screws because they have glue to reinforce their strength due to their penetration into the wood. Additionally, they will not strip sensitive materials and are set properly before moving to a project's next step, avoiding errors.
How do you use a dowel without a jig?
0:532:36How To Make A Joint With Dowels Without A Jig. - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith a pair of end cutters snip the heads off the nails. Then gently press the two boards. Together.MoreWith a pair of end cutters snip the heads off the nails. Then gently press the two boards. Together. Doing this creates two little marks for where you need to drill your holes.
How do you make a strong dowel joint?
2:493:45How to Make a Dowel Joint - Part 1 | Woodworking - YouTubeYouTubeStart of suggested clipEnd of suggested clipPunch holes to help catch the drill. Bit clomp the piece and drill halfway into its thickness atMorePunch holes to help catch the drill. Bit clomp the piece and drill halfway into its thickness at both. Points. Turn the piece over and drill through the remaining half of the thickness.
Series Navigation
Using epoxy to install a shaft is not a difficult task, but I think some people get a bit confused when dealing with different types of golf clubs. Putters are fairly easy to do, but when re-shafting irons and woods, we have to install the ferrule as well, which is a bit confusing to the novice.
Series Navigation
Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.
Introduction – DIY Golf Shaft Pulling Tricks
We previously wrote about “ How to Pull a Golf Shaft ” where we cover the basic technique for properly and safely pulling both steel and graphite golf shafts. While that technique is a great best practice, and the only foolproof (-ish) safe way to pull graphite shafts, there are a few hacks you can use for pulling steel shafts at your home.
The Stove
This is the same technique as “by hand” but you use the stove for your heat source. I’ve been in a couple of random situations where I didn’t have a propane torch or heat gun at my disposal and had to pull a steel shaft from a head. All I did was fire up a burner on the stove and use it to heat the epoxy.
In a Vise
The vise technique is one of the great at-home DIY golf shaft pulling tricks. It’s not dissimilar to the “by hand” technique, but gives you a little more leverage and keeps your hands away from the heat. For this technique, you can approach in two different ways.
Boiling Water
This is my absolute favorite DIY golf shaft pulling trick based on ingenuity alone. What’s nice about this technique is that it works well and makes saving your sweet custom ferrules feasible as long as they weren’t super epoxied on. In order to do this, fill a pot with enough water to submerge your club head in.
Conclusion
Like I said in the intro, I’m going to recommend using traditional shaft removal techniques 100% of the time. You can find that approach here . That said, there are situations that may require an alternative approach and hopefully these DIY golf shaft pulling tricks will help you out there.