Method 1: Stencil Dye
- Preparing the Dye. Fill up the mason jar with lukewarm or hot water, pour in the dye pack of your choice into the water, close up the mason ...
- Prepare the Disc for the Stencil. Apply acetone on cotton balls or paper towel and gently rub off any logos on the discs. ...
- Apply the Stencil. Cut out a large enough contact paper to cover the entire disc. ...
- Dye Your Disc. Take a strip of contact paper and apply the sticky side down on the back of the disc to create a handle to hold on ...
- Clean off the Excess. Run the disk under cold water, and remember to not touch the dye during this process. ...
How to dye a golf disc with a stencil?
Stencil Dyeing 1 Choosing a Design. You can select any design you prefer. ... 2 Preparing the Stencil. Once your stencil is ready, you need to cover the weeded part using the painter’s tape. ... 3 Placing the Stencil on the Golf Disc. Next, put the stencil over the disc. ... 4 Dyeing the Golf Disc. ... 5 Peeling off the Vinyl. ...
What is the best disc golf dye kit?
The iDye Poly is probably the best disc golf dye kit that you can use. Open the dye then remove the color intensifier that comes along with it because it will not be used in the whole process. Just take the powdered dye and cut the side slowly using a scissor.
How long does it take to dye a golf disc?
Slowly immerse the golf disc into the dye mixture Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes Shake off any excess dye from the surface and let it sit aside for a couple of hours for the disc to strongly absorb the dye 5.
Can You dye discs?
If you have a thing for custom discs, then dyeing them on your own according to your taste can help you achieve your desired result. When it comes to disc dyeing, you have plenty of options – you can dye your disc using only one color, or you can dye your disc using multiple colors.
How do you dye discs with stencils?
2:396:53How to Add Custom Dyes and Stencils to Your Disc Golf Discs - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that it holds it down firmly in place. Next thing you're going to do is take your printed outMoreSo that it holds it down firmly in place. Next thing you're going to do is take your printed out stencil or cut it out a little bit and then frame it in the middle of your piece of vinyl.
Can you dye a disc with a stamp?
3:394:57Disc Golf Stamp Dye Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right so once you've let your shaving cream sit on your disc for a while all you got to do isMoreAll right so once you've let your shaving cream sit on your disc for a while all you got to do is rinse it off and you will see you it's been in all the right places. I went ahead and did purple.
How do you make custom dye discs?
6:2328:31HOW TO DYE A DISC - What You Need and What You Need to KnowYouTubeStart of suggested clipEnd of suggested clipOr if you want to put some pinstripes with electrical tape you can brush it on if you just want toMoreOr if you want to put some pinstripes with electrical tape you can brush it on if you just want to color a disc a different color you have a white disc you want to be pink you can just brush it pink.
How do you dye a disc golf disc at home?
One solution is to use a submersion dye where you simply mix water and iDye Poly, heat the solution and submerge your disc. The advantage here is that there is no acetone involved so you often don't experience bleeding under the stencil. I've had moderate success with this method by submerging my disc for 2-3 minutes.
Does Rit dye work on discs?
A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors. Meanwhile, using a brand called Rit DyeMore fabric dye also produces a rit dye disc golf dye and I am one of the many users of it.
How long do you let the disc sit in the dye?
How To Dye A Disc with Shaving CreamFill a base with shaving cream. ... Smooth out the shaving cream and sprinkle powdered dye on top.Place your disc top down on the shaving cream and give it a slight twist.Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.
What kind of dye do you use to dye discs?
There are several dye powders and liquids that work well for dyeing. The most common would be iDye Poly, Rit Dyemore, and Pro Chem Disperse Dye. A great beginners method would be a simple shaving cream mound. All you would need is a can of shaving cream (not gel) and one of the dyes listed above.
What do I need to dye my discs?
In disc dyeing, the general idea is to use a medium—be it shaving cream, lotion, glue, or a number of other materials—to embed a synthetic dye into the plastic of a disc. The use of multiple layers and vinyl stencils allows for a huge range of possibilities.
How do you dye a disc a solid color?
Mix your dye, pour it in the upside down ultimate disc, place disc on top of dye (it should be floating), wait overnight, remove dyed disc, syringe out dye and place back into mason jar for future use.
How do you dye a disc with Rit dye?
1:032:16Rit Dye Alternatives for Dyeing Disc Golf Discs - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd sure enough this stuff dies dark. Here is a champion monarch after a little die on and as youMoreAnd sure enough this stuff dies dark. Here is a champion monarch after a little die on and as you can see at is black never seen the die die that black and that was only 10 minutes sitting in the pan.
How do you use lotion to dye a disc?
2:3219:28Dye Academy 2021 - Lotion Beds Lesson with Bull-Winkel DyesYouTubeStart of suggested clipEnd of suggested clipSo look at look at the air bubbles in mine okay. Yeah well you're just going to kind of pop them upMoreSo look at look at the air bubbles in mine okay. Yeah well you're just going to kind of pop them up some people use a torch to kind of pop some of the bubbles.
How do you dye disc golf discs with glue?
0:3638:26HOW TO DYE Disc Golf Discs With GLUE - Full Tutorial - Disc Golf NerdYouTubeStart of suggested clipEnd of suggested clipAnd pro chem powder dyes mixed into acetone dripped and applied onto a bed of clear elmer's glue iMoreAnd pro chem powder dyes mixed into acetone dripped and applied onto a bed of clear elmer's glue i will be manipulating. That with a straw by blowing the patterns.
How long does it take to dye a golf disc?
Slowly immerse the golf disc into the dye mixture. Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes.
How to get a golf stamp off?
Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp. Rub until the stamp comes off. Make sure there is no gooey residue including oil from people’s hands on the disc surface. In the case of shaving cream dyeing, this step is not necessary.
How long does it take to remove vinyl stencils?
Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes. Shake off any excess dye from the surface and let it sit aside for a couple of hours for the disc to strongly absorb the dye. 5. Peeling off the Vinyl. Slowly remove the stencil from the disc surface.
Do you have to remove stamps from a disc?
In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue.
Can you dye disc golf?
There are several methods to dyeing a disc golf disc, and the art of dyeing has been around for years. If you have a thing for custom discs, then dyeing them on your own according to your taste can help you achieve your desired result. When it comes to disc dyeing, you have plenty of options – you can dye your disc using only one color, ...
What is the medium used to dye disc golf?
The medium is the material that will be used to mix with the dye and is considered as the “bed” which will be used in transferring the dye to the disc. There are a lot of disc golf dye techniques that have been developed and I listed some below with the first two, probably the most popular method:
What is the best disc golf dye?
The iDye Poly is probably the best disc golf dye kit that you can use. Open the dye then remove the color intensifier that comes along with it because it will not be used in the whole process. Just take the powdered dye and cut the side slowly using a scissor.
What is worm dye used for disc golf?
Through the years, there are a lot of different dyes have been used to create a design in the disc. A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors.
What does it mean to customize a disc?
Customizing the disc to the player’s style and preference means adding a personal value and possibly help them improve their chances of winning. To others, it’s all about adding a personal flair to the equipment while also showcasing their sense of artistry in dyeing the disc.
Can a disc bleed after dyeing?
Because this type of discs, although they absorbed the dye well, can bleed easily a few weeks after dyeing.
About The Tutorial
Setting Up The Dye
- The iDye comes in dissolvable packets. Mix 1-liter water with one packet of iDye Next, add a few drops of liquid dishwash into the mixture. This will help reduce surface tension that ultimately prevents the formation of air bubbles Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp....
Stencil Dyeing
- 1. Choosing a Design
You can select any design you prefer. If could be anything from your favorite logo to any symbol, etc. Once you select a design, print out the B&W images of the design. Next, cut off a 12”x12” piece of vinyl paper Place the design underneath the vinyl paper and use the painter’s tape to hol… - 2. Preparing the Stencil
Once your stencil is ready, you need to cover the weeded part using the painter’s tape. This will help the stencil maintain its shape Flip the stencil upside down, so that its paper side is up. Gently scrub down the back so that the tape determinedly contacts the vinyl Next, peel the paper while …
Shaving Cream Dyeing
- In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue. 1. Preparing the Shaving Cream-Dye Mixture: You are required to prepare two mixtures of different consistencies – a base mixture and a dye mixture. For the base mixture: 1. Take a large mixing bowl and mix water with shaving cre…
Final Words
- The procedures mentioned are relatively easy, fun and, inexpensive. You can create any pattern you like. It will take you a couple of tries to perfect the procedure. These two methods are the prominent ways to dye your disc golf discs. If you have any doubt about any point that we have mentioned, you can ask us; we are happy to help.