Golf-FAQ.com

how to dye golf discs

by Dr. Gaylord Hirthe Published 2 years ago Updated 1 year ago
image

  1. Preparing the Dye. Fill up the mason jar with lukewarm or hot water, pour in the dye pack of your choice into the water, close up the mason ...
  2. Prepare the Disc for the Stencil. Apply acetone on cotton balls or paper towel and gently rub off any logos on the discs. ...
  3. Apply the Stencil. Cut out a large enough contact paper to cover the entire disc. ...
  4. Dye Your Disc. Take a strip of contact paper and apply the sticky side down on the back of the disc to create a handle to hold on ...
  5. Clean off the Excess. Run the disk under cold water, and remember to not touch the dye during this process. ...

Part of a video titled Disc Dyeing 101: The Shaving Cream Method - YouTube
2:09
5:55
Take the powdered dye package. And cut off the corner with your scissors. Next fill the two plasticMoreTake the powdered dye package. And cut off the corner with your scissors. Next fill the two plastic cups with shaving cream. Pour a little of the powdered. Into one of the cups filled with shaving.

How to dye a golf disc with a stencil?

Stencil Dyeing 1 Choosing a Design. You can select any design you prefer. ... 2 Preparing the Stencil. Once your stencil is ready, you need to cover the weeded part using the painter’s tape. ... 3 Placing the Stencil on the Golf Disc. Next, put the stencil over the disc. ... 4 Dyeing the Golf Disc. ... 5 Peeling off the Vinyl. ...

Which disc golf discs are best for dyeing?

I will highly recommend those discs made with opaque premium plastics such as Discraft ESP and Innova Star. This type of disc will absorb the dye very well and can last for a long time without fading. In fact, this type of disc is the most popular choice in terms of giveaways or gifts to disc golf players.

How long does it take to dye a golf disc?

Slowly immerse the golf disc into the dye mixture Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes Shake off any excess dye from the surface and let it sit aside for a couple of hours for the disc to strongly absorb the dye 5.

How do you dye a disc without damaging it?

One solution is to use a submersion dye where you simply mix water and iDye Poly, heat the solution and submerge your disc. The advantage here is that there is no acetone involved so you often don’t experience bleeding under the stencil. I’ve had moderate success with this method by submerging my disc for 2-3 minutes.

image

What kind of dye do you use for disc golf discs?

What is the best disc golf dye? I've tried a number of dyes including Rit Dye and Indigo but I prefer iDye Poly above all others. Fishing lure worm dye is also a good choice if you're trying to achieve bright or neon colors. Make sure you're using Poly otherwise it will be difficult to get the dye to hold.

Can you dye a colored disc golf disc?

White discs are best when first starting disc dyeing as they take the color of the dye most easily. You can also use colored discs. However, the more color is present in a disc, the more your dyes have to fight against, and the more unpredictable your results will be.

What do I need to dye my discs?

In disc dyeing, the general idea is to use a medium—be it shaving cream, lotion, glue, or a number of other materials—to embed a synthetic dye into the plastic of a disc. The use of multiple layers and vinyl stencils allows for a huge range of possibilities.

How do you custom dye a disc?

6:2328:31HOW TO DYE A DISC - What You Need and What You Need to KnowYouTubeStart of suggested clipEnd of suggested clipOr if you want to put some pinstripes with electrical tape you can brush it on if you just want toMoreOr if you want to put some pinstripes with electrical tape you can brush it on if you just want to color a disc a different color you have a white disc you want to be pink you can just brush it pink.

How do you dye a disc golf disc at home?

2:095:55Disc Dyeing 101: The Shaving Cream Method - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the powdered dye package. And cut off the corner with your scissors. Next fill the two plasticMoreTake the powdered dye package. And cut off the corner with your scissors. Next fill the two plastic cups with shaving cream. Pour a little of the powdered. Into one of the cups filled with shaving.

Does Rit dye work on discs?

A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors. Meanwhile, using a brand called Rit DyeMore fabric dye also produces a rit dye disc golf dye and I am one of the many users of it.

How long should disc sit in dye?

Place your disc top down on the shaving cream and give it a slight twist. Let the disc set on the die for 24-36 hours then rinse off all shaving cream and dye.

How do you use lotion to dye discs?

0:131:53Lotion Dyeing Method | ARIA Disc Dye - YouTubeYouTubeStart of suggested clipEnd of suggested clipFun when laying down your disc make sure you press down in the middle of that disc just so you don'tMoreFun when laying down your disc make sure you press down in the middle of that disc just so you don't get any air bubbles in the middle. And then push the rest of the disc down into the lotion.

How do you dye a disc a solid color?

Mix your dye, pour it in the upside down ultimate disc, place disc on top of dye (it should be floating), wait overnight, remove dyed disc, syringe out dye and place back into mason jar for future use. This is what im using right now, its cheap and it works well.

How do you dye disc golf discs with glue?

0:0338:26HOW TO DYE Disc Golf Discs With GLUE - Full Tutorial - Disc Golf NerdYouTubeStart of suggested clipEnd of suggested clipAnd pro chem powder dyes mixed into acetone dripped and applied onto a bed of clear elmer's glue iMoreAnd pro chem powder dyes mixed into acetone dripped and applied onto a bed of clear elmer's glue i will be manipulating. That with a straw by blowing the patterns.

How do you dye a disc with Rit dye?

4:526:39HOW TO DYE PLASTICS WITH SYNTHETIC RIT DYE - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm just using a toothbrush. And i go over it. And just scrub it down try and get in the littleMoreI'm just using a toothbrush. And i go over it. And just scrub it down try and get in the little nooks and crannies some plastics don't have so much nooks and crannies so maybe that's not.

Can you paint a disc golf disc?

Paint will make the discs illegal for PDGA tournaments. If you don't play tourneys then paint is the way to go. If you play tourneys you need a new disc, mah friend.

How do you dye a disc a solid color?

Mix your dye, pour it in the upside down ultimate disc, place disc on top of dye (it should be floating), wait overnight, remove dyed disc, syringe out dye and place back into mason jar for future use. This is what im using right now, its cheap and it works well.

Can you dye a yellow disc golf disc?

White or light colored discs work the best and can accept the largest range of colors. For example a yellow disc would turn green when blue dye is added to it. But a white disc would show the blue accurately. There are several dye powders and liquids that work well for dyeing.

How do you dye red discs?

1:0213:21Orc Red Champion: Tutorial for Clear Glue Bed Disc Dying with ProChem ...YouTubeStart of suggested clipEnd of suggested clipGet some acetone for yourself get some good quality acetone plenty of toothpicks. Or you can useMoreGet some acetone for yourself get some good quality acetone plenty of toothpicks. Or you can use bamboo sticks.

How do you dye disc golf discs with glue?

0:0338:26HOW TO DYE Disc Golf Discs With GLUE - Full Tutorial - Disc Golf NerdYouTubeStart of suggested clipEnd of suggested clipAnd pro chem powder dyes mixed into acetone dripped and applied onto a bed of clear elmer's glue iMoreAnd pro chem powder dyes mixed into acetone dripped and applied onto a bed of clear elmer's glue i will be manipulating. That with a straw by blowing the patterns.

How long does it take to dye a golf disc?

Slowly immerse the golf disc into the dye mixture. Depending on the type of dye and what color you are using, the process can take anywhere from 5-10 minutes.

How to get a golf stamp off?

Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp. Rub until the stamp comes off. Make sure there is no gooey residue including oil from people’s hands on the disc surface. In the case of shaving cream dyeing, this step is not necessary.

Do you have to remove stamps from a disc?

In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue.

Can you dye disc golf?

There are several methods to dyeing a disc golf disc, and the art of dyeing has been around for years. If you have a thing for custom discs, then dyeing them on your own according to your taste can help you achieve your desired result. When it comes to disc dyeing, you have plenty of options – you can dye your disc using only one color, ...

What is the medium used to dye disc golf?

The medium is the material that will be used to mix with the dye and is considered as the “bed” which will be used in transferring the dye to the disc. There are a lot of disc golf dye techniques that have been developed and I listed some below with the first two, probably the most popular method:

What is the best disc golf dye?

The iDye Poly is probably the best disc golf dye kit that you can use. Open the dye then remove the color intensifier that comes along with it because it will not be used in the whole process. Just take the powdered dye and cut the side slowly using a scissor.

What is worm dye used for disc golf?

Through the years, there are a lot of different dyes have been used to create a design in the disc. A brand called CS coating worm dye was used to do a worm dye disc golf and is best used with neon and other bright colors.

What does it mean to customize a disc?

Customizing the disc to the player’s style and preference means adding a personal value and possibly help them improve their chances of winning. To others, it’s all about adding a personal flair to the equipment while also showcasing their sense of artistry in dyeing the disc.

Can a disc bleed after dyeing?

Because this type of discs, although they absorbed the dye well, can bleed easily a few weeks after dyeing.

The Process

A big part of the disc dyeing process is organization. If you’re well-organized you’re sure to see excellent results, and the less messy you are, the more your clothes and countertops will be saved from stains!

The Methods

There are plenty of methods out there for dyeing your discs that it can be hard to choose between them. But what method you choose all depends on what design you would like and how you want your disc to look.

The Prep

This may seem like common sense, but always clean your disc before you dye it. Any dirt or grease will affect the end result and leave your disc with imperfections.

Taking Care of Your Dyed Discs (Cleaning)

Cleaning your disc is simple, but just make sure you’ve left the dye on for long enough first.

ABOUT THE AUTHOR

Hi, everyone! My name is James, and I love sharing what I’ve learned about disc golf. It struck me as odd that such an amazing sport could be overlooked by so many people. To help spread the joys of disc golf and to provide some useful tips for improvement, I created the Disc Golf Mentor website. Thanks for stopping by!

What is the best plastic for disc golf?

Premium plastic is the best disc golf plastic to dye and translucent plastic is the most difficult to dye. Also remember that the more curved your disc’s flight plate, the more dye drips you’ll experience and the more difficult it will be to place a template or design cut-out.

How to get rid of a vinyl disc?

This phase is simple, just make sure you’ve let the dye sit for long enough. Rinse in cold water for a few minutes. then remove all vinyl, fabric, or hot glue and rinse again. Scrub the disc lightly under running water.

What is spin dye?

Spin Dye – one of the most elegant design types, requires a steady hand and spinning equipment. Splatter/Drip Design – Literally squirting or dripping dye on a disc to get a cool pattern. Cloth design – soaking a cloth or other material then letting it sit on the disc and leave a pattern. Shaving Cream Dye – (dry powdered dye is usually best ...

Can you use squirt bottles for disc golf?

Shaving cream can also help prevent run-off, but again you need to make sure it’s evenly mixed and it can be a little more messy to work with. Basic (and not very exciting) disc golf drip dye. Squirt bottles are best used when you’re interested in an abstract splash or drip design and can be messy if you’re careless.

Can you tie dye a disc?

Soaked fabric can prevent the dye from running off or bleeding through and it can create some neat textures and designs. This method is also great for tie-dying a disc. Of course here you’ll need to make sure the fabric is touching all areas of the disc that need to be dyed and that the fabric is fairly evenly soaked.

Can you dye disc golf plastic?

Very difficult to get a deep color and fade and bleed within weeks. Premium plastic is the best disc golf plastic to dye and translucent plastic is the most difficult to dye.

How to dye discs?

Method 1: Stencil Dye. For this method, you need to print out the exact design or stock image you want on your disc and cutout a stencil of the design. This is the most popular way to dye your discs, as the image can further personalize your equipment.

How to clean a disc of dye?

Run the disk under cold water, and remember to not touch the dye during this process. Take off all the contact paper while keeping under running water. Air-dry the disc for a clean finished product.

How to make a stencil for a disc?

Fold the sides of the contact paper over the edges. Stick your stencil on the disc using scotch tape on the sides and cut out through the contact paper underneath using your x-acto blade. Remember to cut out the parts you want to dye.

How long does it take to dye a disc?

Spin it around gently for a couple of minutes and check the color every 5-10 minutes. Remove it from the dye when the color has reached the intensity to your liking, which should take around an hour.

How to make a splatter with a squirt bottle?

Start with a slow spin and apply the colors using the squirt bottle to your liking. You can adjust the spinning speed for bigger splatters. But be cautious of the volume of your dye. If it’s thin, then you don’t have to spin it too fast for a large splatter.

How to get rid of logos on discs?

Apply ace tone on cotton balls or paper towel and gently rub off any logos on the discs. Make sure to do this step in a well-ventilated area, as the acetone can be quite strong. Give the disc a quick rinse before moving on to the next step, to remove any excess acetone.

How to put marble on golf disc?

Use duct tape to stick the marble exactly in the middle of the large golf disc. Apply the marble on the top side of the disc. Once the marble is stuck firmly, set the disc on an even surface, and test out its ability to spin properly. It should spin without effort and fast enough to spatter the color on the projected disc.

image

About The Tutorial

  • Here's everything you'll need to dye your first disc golf disc: 1. A disc 1. White discs are best when first starting disc dyeing as they take the color of the dye most easily. 2. You can also use colored discs. However, the more color is present in a disc, the more your dyes have to fight against, an…
See more on udisc.com

Setting Up The Dye

Stencil Dyeing

Shaving Cream Dyeing

Final Words

  • The iDye comes in dissolvable packets. Mix 1-liter water with one packet of iDye Next, add a few drops of liquid dishwash into the mixture. This will help reduce surface tension that ultimately prevents the formation of air bubbles Choose your preferred golf disc. Pour a few drops of acetone on a coarse cloth and gently smear it all over the stamp....
See more on cypresspointgolf.com

The Process

  • 1. Choosing a Design
    You can select any design you prefer. If could be anything from your favorite logo to any symbol, etc. Once you select a design, print out the B&W images of the design. Next, cut off a 12”x12” piece of vinyl paper Place the design underneath the vinyl paper and use the painter’s tape to hol…
  • 2. Preparing the Stencil
    Once your stencil is ready, you need to cover the weeded part using the painter’s tape. This will help the stencil maintain its shape Flip the stencil upside down, so that its paper side is up. Gently scrub down the back so that the tape determinedly contacts the vinyl Next, peel the paper while …
See more on cypresspointgolf.com

The Methods

  • In this method of dyeing, you don’t need to remove the stamp from the disc. But, before you start, make sure that the disc is perfectly clean from any residue. 1. Preparing the Shaving Cream-Dye Mixture: You are required to prepare two mixtures of different consistencies – a base mixture and a dye mixture. For the base mixture: 1. Take a large mixing bowl and mix water with shaving cre…
See more on cypresspointgolf.com

The Prep

  • The procedures mentioned are relatively easy, fun and, inexpensive. You can create any pattern you like. It will take you a couple of tries to perfect the procedure. These two methods are the prominent ways to dye your disc golf discs. If you have any doubt about any point that we have mentioned, you can ask us; we are happy to help.
See more on cypresspointgolf.com

Let’s Get to It!

  • A big part of the disc dyeing process is organization. If you’re well-organized you’re sure to see excellent results, and the less messy you are, the more your clothes and countertops will be saved from stains! Before you begin, know exactly what design you want and have your design setup ready to go. An ideal set up would be pie tins under the disc to catch all the die that spills off th…
See more on discgolfmentor.com

Taking Care of Your Dyed Discs

  • There are plenty of methods out there for dyeing your discs that it can be hard to choose between them. But what method you choose all depends on what design you would like and how you want your disc to look. Below we’ll take a look at some of the most popular methods for dyeing discs. Adhesive Vinyl Decal/Stencil Dye:An incredibly popular method, this method lets you really put y…
See more on discgolfmentor.com

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9