Golf-FAQ.com

how to extend steel golf grips at home

by Caesar Goldner Published 2 years ago Updated 2 years ago
image

The Universal Shaft extensions will work with almost any steel or graphite shaft. After applying a little epoxy, insert the extension into a shaft, force the provided tapered plug into the extension until the extension expands to fit the ID of the golf shaft. Its that simple.

Part of a video titled How to ADD Extensions To Golf Clubs - Start to Finish!
7:41
11:02
So to get the grip on we've got our grip tape. And we measure a half inch longer than the length ofMoreSo to get the grip on we've got our grip tape. And we measure a half inch longer than the length of the grip.

Full Answer

How do you put new grips on a golf club?

Wrap the extra bit around the top so it is covered with tape as this will make it easier to slip the new grip on. Place the club in the vice with the head pointing up, taking care to use a shaft protector (or similar) to avoid damage as you tighten. Now take one of the new grips, cover the little hole at the end, and pour in a little White Spirit.

What do I need to extend a golf shaft?

You need to know the “butt diameter” of the shaft that you are extending, and purchase the extension that matches. Here is a database of shafts. Something to mix epoxy with (I use the end of a paintbrush) Hey!! I'm Zach, the founder of The DIY Golfer.

Should you Save Your Golf Grips for future use?

If so, you might want to consider learning how to save your golf grips for future use rather than cutting them off. In my career as a golfer, I have wasted HUNDREDS of usable golf grips because I was too lazy to learn how to save them. I can’t stand to think the sum of money that I cut to shreds. A year ago, I decided I was done wasting grips.

How to sand a baseball grip?

To properly sand your grips you must simply follow some easy steps. First, you must use medium grit sandpaper and rub it thoroughly against your grip. You mustn’t use rough grit right off the bat as it may damage your grips. Test the grip with a medium grit and then move to rough grit if need be.

image

How do you make a golf club shaft longer?

Tips on How to Extend a Steel ShaftNever extend a steel shaft more than 2″. ... We recommend using a steel extender to extend a steel shaft. ... Always epoxy the extension in place, do not rely on a pressure fit.Abrade the extension piece prior to installation to give the epoxy a better hold.More items...

How do I extend my driver length?

5:0114:42Golf Club Repair - How To Extend a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut certainly if you wanted to rough it up get it in there and they want it when you get it all niceMoreBut certainly if you wanted to rough it up get it in there and they want it when you get it all nice and glued using 24 hour epoxy. Not this not the quick stuff because it tends to be more brittle.

Can you extend club length?

Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn't necessarily true. There are two ways to lengthen your shafts. You may add extenders to your existing shafts or you may replace your existing shafts with longer ones.

How do you extend a golf driver shaft?

0:113:02How to Extend a Golf Shaft - YouTubeYouTubeStart of suggested clipEnd of suggested clipToday I'll be showing you how to extend a golf club shaft. This is a very simple process and it'sMoreToday I'll be showing you how to extend a golf club shaft. This is a very simple process and it's extremely similar to when you reinstall a putter head or any other type of golf club back into a shaft

What if my golf clubs are too short?

What Happens When Golf Clubs Are Too Short? For most golfers, having clubs that are too short will be better than if they're too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You'll also have the tendency to push the ball a lot.

Does half an inch make a difference in golf clubs?

Master clubmaker Ralph Maltby says that adding 1/2 inch length can add about 5 to 7 yards in distance for irons. But the longer shaft still makes it harder to control the clubhead, which is even more important the closer you get to the green.

How long should my golf clubs be for my height?

Using the ratio of every 6" of height there should be a 1" change in length then there should be a 1 ½" difference between their 5-irons. For example, recommend 36.5" for the lady and 38" for the man (or 36.75" / 38.25").

How much does it cost to have golf clubs lengthened?

Lengthen Shaft ($5.99 Steel or $6.99 Graphite per club*): Most irons, putters, and woods can have length added to the existing shaft.

How long should your driver be based on height?

Driver Shaft Length Based Solely on HeightHeight (feet/inches)Driver Shaft Length5'4″-5'7″45.5″5'2″-5'4″45″5'0″-5'2″44.5″4'10”-5'0″44″6 more rows•May 9, 2021

How do you extend a steel golf shaft?

7:4111:02How to ADD Extensions To Golf Clubs - Start to Finish! - YouTubeYouTubeStart of suggested clipEnd of suggested clipTighten. It down. Cut so we are almost ready to regrip. But before we do anything we want to checkMoreTighten. It down. Cut so we are almost ready to regrip. But before we do anything we want to check to make sure the butt end doesn't have any sharp edges. So we take our file and we just deeper it.

Will a longer shaft add distance?

True? Typically most players do pick up speed (around 1 mph per inch) with a longer driver shaft, and since every 1 mph of additional driver speed generally yields about two yards of extra carry distance, technically the advice you've been given is true.

Does lengthening a golf club change the lie angle?

The lie angle will automatically change if clubs are lengthened. Only slightly but it will change. There is no such thing as standard lie as all the manufacturers generally are different. The lie angle that is correct for you can only be tested dynamically - i.e. via a pro or fitter on a lie board hitting golf balls.

How to get better grip on golf club?

For the best results, apply a thin layer of grip solution to your club’s handle and tape.

Why do professional golfers use hard grips?

Professional golfers use a hard grip because it helps them control the speed and momentum of their swing, particularly during high-pressure situations.

What is Grip?

The grip is a very important part of the golf club that affects your shot, but it’s also easily damaged.

What is a hook on a golf club?

A new hook is used to take off the old grip. This will help keep your golf club in tip-top shape and avoid any scratches on carbon lamination caused by attempts at removal with a blade that isn’t designed for this purpose.

What does it mean when a putter has a large grip?

One thing that many putters don’t consider when practicing is their grip size; if they have large and thick grips on them, this will give more control over wrist movements which makes putting easier to achieve.

What does changing the grip do to golfers?

A change in the grip can improve a golfer’s game.

Why is rubber used in golf?

On golf, rubber is a very popular material to make grip because it’s easy and gives the player a solid feel when holding.

Series Navigation

Extending a golf shaft is a useful technique to have if you are buying used clubs, or if you are experimenting with different club lengths. If you know how to cut a golf shaft or how to extend it, you don’t ever have to worry about purchasing the correct length of clubs on Ebay or other used club marketplaces.

Materials Needed

Extension (You could also use an old golf shaft) Make sure you purchase the right size extension. You need to know the “butt diameter” of the shaft that you are extending, and purchase the extension that matches. Here is a database of shafts.

About the Author: Zach Gollwitzer

Hey!! I'm Zach, the founder of The DIY Golfer. I created this site in 2015 while playing D1 collegiate golf to help myself understand the game of golf better and improve as a player. Fast forward a few years, and it has become much more than a journal.

How to use white spirit tape?

Place your receptacle under the grip (if your vice arrangement allows you to do so), then, pinching the open end to control the flow, pour the White Spirit over the double-sided tape with any excess falling into your receptacle to re-use .

Can you make final adjustments before it sets too firmly?

If you’re quick enough, you’ll still be able to make final adjustments at this stage before it sets too firmly.

Is regrip golf club valuable?

As a golfer, learning how to regrip golf clubs is really valuable. While you might not think it, something worn out or on its last legs can cost you precious shots, especially in damp and wet conditions.

Is it easier to change your grip on a golf ball?

But changing a golf grip is easier than many golfers imagine.

Can you get double sided tape in sheet form?

You can also get double-sided tape in sheet form rather than on a reel.

Can graphite shafts be damaged?

With graphite shafts, you must proceed more carefully to avoid damaging them.

Can you be aggressive with steel shafts?

With steel shafts you can be relatively ‘aggressive’ with the knife, always making sure to work the blade away from you not towards you. (You may find it easiest to do this with the club secured in the vice.)

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9