What is the lie angle of a golf club?
The lie angle of the golf club is the angle formed between the center of the shaft and the sole of the club (ground), when the club is in its proper address position ( grooves parallel to the ground) – see picture below. In practice it could be a little difficult to measure the lie angle with a protractor.
What is flat lie and up lie in golf clubs?
Flat Lie and Up Lie. Sometimes, in the fitting process, the lie angle is adjusted. Then, if the lie angle is reduced the golf club is “flatter”. Respectively, if the lie angle is increased, the golf club is more “upright”. Such adjustment is expressed in degrees: a number of degrees ( usually 1 … 3 ) flat or up.
How do you measure the Lie of a golf lie?
The lie is most easily measured using an industrial golf club specification gauge that the foundries, golf club manufacturers and very few golf clubmaking shops have access to.
How do you know which lie to lie on a club?
Thankfully, a special kind of tape exists – called impact decal – that can be stuck on the sole of a club. Using that tape and hitting balls from a flat piece of plastic will leave an impression on where the sole hit hardest on the ground. If the impression on the tape is made in the center you are using the correct lie.
How is lie angle measured on golf irons?
1:4820:37Unexpected Golf Lie Angle Test For Irons - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo my favorite way is to use a golf ball that's got a line right through the middle of it we maybeMoreSo my favorite way is to use a golf ball that's got a line right through the middle of it we maybe can draw a sharpie line on the middle of it.
What is the average lie angle on a golf club?
The standard lie angle of drivers and woods is in the range between 56 and 60 degrees, hybrid / rescue clubs between 58 and 62 degrees, irons between 61 and 64 degrees. For wedges it is nearly always 63 or 64 degrees.
Does 1 degree upright make a difference?
Yes it will make a difference, I play 2 degree upright and +1/2. If your hitting the ball left all the while (I am guessing your right handed) won't be to do with having the lye angle to flat.
What does 2 degrees upright mean on a golf club?
So when most people say a club is 2 degrees upright (or 1 degree upright, 2 degrees flat, etc) then they are measuring it off of the standard off the shelf lie measurement for that particular club. It can also refer to the club being too upright for a particular person.
How do you choose a lie angle?
1:149:30How To Find The Perfect Iron Lie Angles | TrottieGolf - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you can cheat things your lie angle on a golf club is how the club goes through the turf. SoMoreBut you can cheat things your lie angle on a golf club is how the club goes through the turf. So it's the angle between the shaft. And the sole of the golf club.
What is the standard lie of a 7 iron?
62.5 degreesWhat Is The Standard Lie Angle For A 7 Iron? Most golf club manufacturers 7 iron lie angles are 62.5 degrees.
Does upright lie promote a draw?
The upright lie also promotes a left tilting spin axis, which leads to what's generally described as draw spin. An upright lie angle basically gives you a head start, but depending on the severity of the slice conditions the golfer generates, it certainly won't guarantee a draw.
What happens if lie angle is too upright?
If your lie angle is too upright, typically meaning that it's closer to 90 degrees than 0 degrees, then that means you will typically hit the ground with your club with the heel side of the sole.
What lie angle should my wedges be?
So generally think about putting in a gap wedge that's 48 or 50 degrees, a sand wedge that's between 54 and 56 degrees, and a lob wedge that's between 58 and 60 degrees.
What is a +2 lie angle?
Two degrees upright means that a golf club has a lie angle that is two degrees upright of standard.
Is lie angle too flat?
After you make impact the line will appear on the face. If it's pointing towards the toe, then your club is too upright. If it's pointing towards the heel, then it's too flat. If the line is perpendicular to the grooves on the face, then your lie angle is correct.
How should golf clubs lie at address?
0:363:33GOLF TIP - HOW YOUR GOLF IRON SHOULD SIT - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo do the heel no. So the toe is slightly raised to allow for the the dynamic movement to impactMoreSo do the heel no. So the toe is slightly raised to allow for the the dynamic movement to impact where the chef raises under and the. And it bows as well so yeah so this puts a real paramount.
Nominal Lie Angle
The lie angle of the golf club is the angle formed between the center of the shaft and the sole of the club (ground), when the club is in its proper address position ( grooves parallel to the ground) – see picture below.
Measurement of Lie Angle
In practice it could be a little difficult to measure the lie angle with a protractor. However, it is quite easy to measure it using one of the many available smartphone applications. The application should measure the deviation of the device from the vertical. Just remember to carefully align the grooves on the face parallel to the level / ground.
Flat Lie and Up Lie
Sometimes, in the length fitting process, the lie angle is adjusted. Then, if the lie angle is reduced the golf club is “flatter”. Respectively, if the lie angle is increased, the golf club is more “upright”.
Changes of Lie Angle
Changing the lie angle of a club does not affect its swingweight nor MOI (MOIG). However, such change influences the optimal position of the club when the player adressing the ball. A popular rule indicates that, to maintain the same position of the player, changing the lie angle by 1 degree requires ½ inch change in length.
What is the lie angle of a golf club?
The "lie angle" of any golf club is the angle formed between the center of the shaft and the sole, or ground line, of the club when the club is soled in its proper ...
What happens if the lie angle of your golf clubs is ill-suited to you?
When the lie angle of your clubs is wrong for your swing or body type, you can put a great swing on the ball and still have problems with accuracy. Poorly fitting lie angles create pushes and pulls and other mishits.
What does it mean when your divots are deeper on the toe side than the heel side?
If your divots are deeper on the toe side than the heel side (toe down, heel up at impact) or deeper on the heel side than the toe side (toe up, heel down at impact), that's a sign your lie angles might be too flat or too upright.
What is the lie angle on a 9 iron?
Upright lie angle: A lie angle that is higher than the standard lie angle (a 66-degree lie angle on a 9-iron is more upright than the standard 9-iron lie angle of around 64 degrees). You might hear a golfer (or clubfitter) saying things such as, "You need flatter lie angles on your irons," or "I had my irons bent 1-degree upright.".
Why is a proper lie angle important?
Proper Lie Angle Is More Important in Irons Than in Woods. Don't misunderstand: Lie angle is an important factor in all golf clubs, even the putter. But having improperly fit lie angles causes more problems in irons than in the woods.
What is lie angle?
Lie angle is a factor that affects the accuracy of golf shots. Golfers who use clubs whose lie angles don't fit their body types and/or golf swings are costing themselves strokes. Matching the lie angle of clubs to the specific golfer is one of the goals of a clubfitting session.
What is the range of lie angles?
Lie angles almost always range from the mid-50 degrees (in drivers) to the mid-60 degrees (in short irons). In irons, the range is typically from 59 or 60 degrees to around 64 degrees. (Lie angles on putters reach into the 70s.)
Invest in a Golf Loft Machine
The most important thing that you will need is a golf loft machine. It is a must-have investment if you want to customize your golf clubs, making sure that the lie angle is at par with your preference. It is essential for measuring and bending golf clubs.
Know the Lie Angle
Before you proceed, you must know the exact lie angle that you want for the golf club. There is no internationally recognized lie angle. The right choice will depend on several factors, such as the specific brand and model of the club that you have.
Use the Bending Bar
After taking the necessary measurement, you can now bend the loft using the bending bar. The latter is what will be doing the magic trick as it bends the loft to the desired angle. You will need enough strength to exert the necessary pressure. Otherwise, the lie angle will not bend as it should.
Measure the Lie Angle
After using the bending bar, you will need to once again measure the lie angle. See to it that it is exactly the angle that you want. Otherwise, you will need to repeat using the bending bar until you reach the right angle.
What is the angle of the club shaft when you hit the ball?
Lie angle is the angle the club shaft makes with the ground when you HIT the ball and your club head is parallel with the ground.
How to wear golf shoes?
While wearing your golf shoes or street shoes stand on the floor with your normal posture, looking straight ahead, and have your arms hanging in a relaxed position by your sides.
What is the lie of a golf club?
The lie of a club is the angle formed by the intersection of the line of the shaft and the line of the ground when the clubhead is resting flat on the ground. That angle number is located between 0 and 90 degree and varies from club to club.
What does "lie" mean in golf?
Lie can also refer to the environment in which the ball finds itself, the ball or shot lie. It can also refer to the number of strokes a player has taken up to a point on a given hole.
Why is it important to use the correct lies in golf clubs?
Using clubs with the correct lies can prove crucial when working to maximize the chances of hitting the ball straight. Indeed, a club that is too upright for its golfer will see its toe lift from the ground instead of laying flat and as a result balls struck with it will tend to go left of the intended target.
What happens if you hit a ball with a flat piece of plastic?
Using that tape and hitting balls from a flat piece of plastic will leave an impression on where the sole hit hardest on the ground. If the impression on the tape is made in the center you are using the correct lie. If the impression is close to the heel, you are using clubs that are too flat.
What is the difference between a gold dot and a maroon dot?
At one end of the spectrum is the Gold dot with a 3.75 degree flatter lie and at the other end is the Maroon dot with a 4.5 degree upright lie. Likewise, a shorter golfer will likely be more comfortable using clubs whose lies have been made flatter – less upright – they he would using normal, standard lie clubs.
What does it mean when your golf club is lying?
Well, you need to know how lie angle can affect ball flight. If your lie angle is too upright, typically meaning that it's closer to 90 degrees than 0 degrees, then that means you will typically hit the ground with your club with the heel side of the sole.
What is the lie angle of a golf club?
It's always an acute angle, less than 90 degrees. The lie angle dictates, in part, where your hands will be positioned on the golf club, relative to the ground, at address.
What does it mean when your golf club is on the toe side of the sole?
If your lie angle is too flat, typically meaning it' s closer to 0 degrees than 90 degrees, then that means you will typically hit the ground with your club with the toe side of the sole. Hitting the ground with the toe of the sole means you're hitting with an open face, leading to a fade or a slice, meaning the ball will sail well right ...
How to know if you stand at address?
It's also important to know how you stand at address (more upright or flat), your height (taller players tend to stand more upright, but not universally) and the distance from your hands at address to the ground with your clubs.
What does it mean when you hit the ground with the heel of your sole?
Hitting the ground with the heel of the sole means you're hitting with a closed face, leading to a pull or a hook, meaning the ball will sail well left of the intended target. From a visual standpoint, the toe of the golf club will be too much in the air at impact.
What is the lie angle of a golf club?
Lie angle is defined as the angle between the shaft and the ground line when the club is measured in normal playing position with the center of the sole touching the ground line. The most important thing about measuring lie angle for each particular golfer is how the club is interacting with the ground at impact.
What is the lie angle on irons?
Lie angle is one of the most important, if not THE most important thing to get right when you buy a set of irons. Each manufacturer has a different spec for the lie angle on their clubs, and a majority of golfers never get them adjusted for their particular swing.
What happens when the angle of the club is not adjusted properly?
There are only two scenarios that occur when your lie angle is not adjusted properly for your swing. The club is too upright, and the toe is not making contact with the ground at impact. The club is too flat, and the heel is not making contact with the ground at impact.
Why is the lie angle important?
Wrapping it up. To briefly summarize, the lie angle of your irons is extremely important because it will greatly affect the initial direction of your shots. Not all irons are created equal, and most players are using irons that likely do not have the right specifications for their swing.
How far off the target line does the ball travel?
For every degree that your lie angle is either too upright or flat, the ball will initially travel 4 yards off your intended target line. Some players have lie angles that are as much as 2-3 degrees off, which means they are making things very difficult for themselves on approach shots!
Do golfers get adjustments when buying irons?
When golfers buy a new set of irons they don’ t usually get any kind of adjustments made , most notably their lie angle. They incorrectly assume what they are buying is right for them. Today I want to talk about one of the most important things players are overlooking when they purchase an iron set. If this specification is not adjusted properly ...
Is there a standard for lie angle on 7 irons?
There is no standard. Showing up to the store and buying irons off the shelf without testing out the lie angle is a coin flip, because there is no standard for lie angle in the golf industry. I went to the websites of some of the most popular manufactures and got the standard lie angles for 7-irons; here are the results:
Nominal Lie Angle
- The lie angle of the golf club is the angle formed between the center of the shaft and the sole of the club (ground), when the club is in its proper address position (grooves parallel to the ground) – see picture below.
Measurement of Lie Angle
- In practice it could be a little difficult to measure the lie angle with a protractor. However, it is quite easy to measure it using one of the many available smartphone applications. The application should measure the deviation of the device from the vertical. Just remember to carefully align the grooves on the face parallel to the level / ground. Such a measurement is sho…
Flat Lie and Up Lie
- Sometimes, in the length fitting process, the lie angle is adjusted. Then, if the lie angle is reduced the golf club is “flatter”. Respectively, if the lie angle is increased, the golf club is more “upright”. Such adjustment is expressed in degrees: a number of degrees ( usually 1 … 3 ) flat or up. The picture below shows the example of altering th...
Changes of Lie Angle
- Changing the lie angle of a club does not affect its swingweight nor MOI (MOIG). However, such change influences the optimal position of the club when the player adressing the ball. A popular rule indicates that, to maintain the same position of the player, changing the lie angle by 1 degreerequires ½ inch change in length. Unfortunately, this is only an inaccurate approximation …